Star Trek Builders Unite 6: The Undiscovered Thread
This discussion has been closed.
Daz 3D is part of 
Connect
DAZ Productions, Inc.
7533 S Center View Ct #4664
West Jordan, UT 84084
Licensing Agreement | Terms of Service | Privacy Policy | EULA
© 2024 Daz Productions Inc. All Rights Reserved.
Comments
Excellent job!!!
Thanks Glad you like her. Your new textures are also looking good
Hello,
First time posting here. I first want to thank everyone here for all their work and show you the uniform I created combing your bodysuit textures and the V4 Courageous skirt.
I need a little help. I want to update my version of Kang for the next story. All I want to do is swap his silver over-over shirt for the movie tunic. Unfortunately, M3's tunic won't conform to P6 James and I have nothing in my Runtime for James that will work as far as textures maps are concerned. Anyone have any ideas?
Trying a TNG Falcon mix... trying for a Defiant cockpit I think I made it look more imperial shuttle... What do you guys think?
I like it! I think it has a really unique and great look for a Star Trek vehicle.
Thought I'd share a wip for a project I'm working on, a graphic novel set just after the close of the Romulan War. Hope you like. :)
Really like that combadge! Is it available?
Have you tried running the M3 tunic through Wardrobe Wizard or CrossDresser? Sometimes a stand-alone product works better than the tools built into Poser or DS.
I know exactly where I'd use this model, if I had a copy. A Trekkie/Warsie mixture would fit right in at http://www.fenspace.net/ ...
Have you tried running the M3 tunic through Wardrobe Wizard or CrossDresser? Sometimes a stand-alone product works better than the tools built into Poser or DS.
Tried it. I have the M3 plugin for Wardrobe wizard and the James plugins, too. But WW says the M3 Klingon Tunic is not a supported item.
and I don't have cross-dresser.
Hello,
First time posting here. I first want to thank everyone here for all their work and show you the uniform I created combing your bodysuit textures and the V4 Courageous skirt.
Welcome to the group!
Regarding the uniform, the zips I posted has the images (in readme directory) of the uniforms from Star Trek Online would provide a great guide on how these would look.. I'm not planning to convert them to Courageous or Valiant, so If you want to take a shot, go for it.
Tried it. I have the M3 plugin for Wardrobe wizard and the James plugins, too. But WW says the M3 Klingon Tunic is not a supported item.
and I don't have cross-dresser.
Have you tried converting it as a prop?
THats looking good Richard
To support my set of Uzilite's The Next Generation uniforms and a reboot of my old STTOS for bodysuits, I am posting a set of low-poly badges. I find that the bright uniforms for STTOS (Medical and Gold) make it hard to see the badge). These badges are a set of 11 sized and paranted to V4 and M4.
In Star Trek Online, the rule of thumb is if your rank insignia is Gold, your combadge should be gold or have gold in it. I included a few mat files for the material zones, or you can use your own..
Included are the old TOS Command, Engineering/Security, Sciences badges, plus a few others..
Tried it. I have the M3 plugin for Wardrobe wizard and the James plugins, too. But WW says the M3 Klingon Tunic is not a supported item.
and I don't have cross-dresser.
Have you tried converting it as a prop?
Prop???
Have you tried converting it as a prop?
Prop???
Instead of converting to a conforming figure, you might convert to a prop and then parent this to the chest. The option is located beneath the "Convert to" field on the right "As Prop".
Have you tried converting it as a prop?
Prop???
Instead of converting to a conforming figure, you might convert to a prop and then parent this to the chest. The option is located beneath the "Convert to" field on the right "As Prop".
Which program are you talking about? There's no option like that in the version of Wardrobe Wizard I have. It still says the tunic is not a supported figure:
Really like that combadge! Is it available?
Not as a prop - right now it's a png image on a plane with a trans map. Don't yet have the skills to create 3d models from scratch. If you still want it - or if you want to take a crack at making a prop version - let me know. :) Glad you like!
Have you tried converting it as a prop?
Prop???
Instead of converting to a conforming figure, you might convert to a prop and then parent this to the chest. The option is located beneath the "Convert to" field on the right "As Prop".
Got it !!! Got it!! It's converting now. It's been so long since I did this, I forgot Half the steps! Got it now!
Prop???
Instead of converting to a conforming figure, you might convert to a prop and then parent this to the chest. The option is located beneath the "Convert to" field on the right "As Prop".
Which program are you talking about? There's no option like that in the version of Wardrobe Wizard I have. It still says the tunic is not a supported figure:
I'm using the standalone version of Wardrobe Wizard (not the plugin to poser), I find it easier to use.
Prop???
Instead of converting to a conforming figure, you might convert to a prop and then parent this to the chest. The option is located beneath the "Convert to" field on the right "As Prop".
Which program are you talking about? There's no option like that in the version of Wardrobe Wizard I have. It still says the tunic is not a supported figure:
I'm using the standalone version of Wardrobe Wizard (not the plugin to poser), I find it easier to use.
I finally got it. I just had to remember all the steps. It's been awhile since I've needed to convert anything.
Not as a prop - right now it's a png image on a plane with a trans map. Don't yet have the skills to create 3d models from scratch. If you still want it - or if you want to take a crack at making a prop version - let me know. :) Glad you like!
prop made out of primatives ... is there a name associated with the badge? and do you want it?
note: image for a new uniform based on the Star trek Online, Sierra 4... M4 and V4 bodysuit set will be posted as a freebie later...
Instead of converting to a conforming figure, you might convert to a prop and then parent this to the chest. The option is located beneath the "Convert to" field on the right "As Prop".
Which program are you talking about? There's no option like that in the version of Wardrobe Wizard I have. It still says the tunic is not a supported figure:
I'm using the standalone version of Wardrobe Wizard (not the plugin to poser), I find it easier to use.
I finally got it. I just had to remember all the steps. It's been awhile since I've needed to convert anything.
Look great! Glad you got it working.
Instead of converting to a conforming figure, you might convert to a prop and then parent this to the chest. The option is located beneath the "Convert to" field on the right "As Prop".
Which program are you talking about? There's no option like that in the version of Wardrobe Wizard I have. It still says the tunic is not a supported figure:
I'm using the standalone version of Wardrobe Wizard (not the plugin to poser), I find it easier to use.
I finally got it. I just had to remember all the steps. It's been awhile since I've needed to convert anything.
Look great! Glad you got it working.
Thank you!
Very cool, can we see some more picts? Are you going to include an interior?
-- Walt Sterdan
Nice! Cant wait to see more.
Very cool, can we see some more picts? Are you going to include an interior?
-- Walt Sterdan
Ill post more, I have to still to the main ramp and cargo hold elevator, then the cockpit will be detailed, but rest of the inside will be separate props.
Adventures of Jade Redmond IV has been posted over at DA.
http://pdsmith.deviantart.com/art/Adventures-of-Jade-Redmond-IV-480895704
Like the other Jade stories they are a back story for other books and only 6 frames.
Enjoy.
I like the look. Especially the lighting! It makes the character stand out so much more from the back ground. Don't give up the story you have planned, you have a look that is fantastic. Stick with it!
-Paul
It does have an imperial shuttle look, but hey it's still one heck of a cross over from Wars to Trek. Besides, look at it like this, how many ships does trek have that are crewed by 5 or 6 people? we need (okay I need) more smaller ships and tons of TNG era props to populate what we no long get on TV or movies, just in the books.
I love it!
-Paul