Daz 3D is part of 
Connect
DAZ Productions, Inc.
7533 S Center View Ct #4664
West Jordan, UT 84084
Licensing Agreement | Terms of Service | Privacy Policy | EULA
© 2025 Daz Productions Inc. All Rights Reserved.
Comments
Hmm, not sure if I can post a 'clone' file without breaking some license/eula/tos. I used V4 and G3F to create it in blender and I don't own the copyright to either of those figures. If someone from daz posts and gives the OK, I don't mind sharing it.
Lucrezia Locks Hair and Marie Antoinette Gown A3. Not bad. Tried to remove the poke through with smoothing but still had some holes in the bodice. Used fit control and it worked great. Also used SY Front Fixer G3F by SickleYield from Rendo to fix that weird front stretching. Rendered in 8 1/2 minutes.
would there be some way to save it as a morph?? I've got the same issue as ALLIEKATBLUE can't get my brain wrapped around modeling at all .........
In my brain, a clone is already a morph, just a special one that's 'hidden' unless using autofit.
And good call on front fixer. If I had known about that, would've avoided the blender route. Much easier solution!
The outfit on the female may be an old outfit of Xurge's from way back when. He used to do that kind of stuff at the time.
Laurie
Neat. I don't have enough clothing for this generation to warrant the purchase but cool for those who do.
oh that came out great! I have a few Sickleyield things, but I really must get that front fixer from her. I can't work out the dresses and skirts refits :sigh:
Thanks :) I'll have to sort through all of these products and make a choice... these V3/M3 items can get really expensive!
@Llynara how did you get the M3 poses in that product to work on other figures? Or do you own M3 as well?
Works very well. Below is an iray render of VYK Boopsie
https://www.daz3d.com/vyk-boopsie
dressed with clothes from Aiko 3 Mascot Menagerie
https://www.daz3d.com/aiko-s-mascot-menagerie
This is fantastic! There's still a bunch of stuff from that era that still holds up today (and is in some cases, far better) from people like Uzilite, so it'll be great to not have to do the dance with V3/M3 to Genesis and Genesis to G2/G3. Throw in stuff like SickleYield's Ultra Templates (and other utilities, for that matter) and it's all like brand new. Woooo!
VYK Boopsie dressed in clothes from Dixie for A3 and hair from Mentha Piperata for Aiko 3.
https://www.daz3d.com/dixie-for-a3
@mt1 - I did this one about two months ago and I think I just used an G3M pose that was close to the M3 one. I don't know of any way to convert Generation 3 poses to the newer figures, unfortunately, so I just pick ones that are close.
@Alliekatblue Love that dress! It came out great!
@Artini I'm totally digging Boopsie in a bunny outfit! Too cute! She looks good in Dixie too.
Here's a quick test render with Lilith 7 wearing Fionnula for Aiko 3. That's an ubered up Top of the World set with Easy Environments First Light backdrop. The lighting and render settings need a little tweaking, but that's okay.
The oufit fits pretty well on Lilith's lovely curves. (And any time I can get away with Gordon-looking tartans, I'm there!) I need to smooth a few things and there's slight poke through on the boots, but this product works so well! It eliminates the time consuming steps of fitting to Generation 3 to Genesis and then to Genesis 3. Love it!
Thanks, Llynara. I really like Wear Them All - it opens so many possibilities to reuse clothes from older generation of characters.
Fionnula looks great on Lilith 7.
I was wondering how Fionnula converted. That has to be one of my favorite outfits ever ;).
Laurie
Thanks, I love that outfit too. I think there are some extra props I forgot, but it fits very well. This is going to be so much fun to play with. V3 and A3 have incredible wardrobes. So do a lot of the other Gen 3s. Woohoo!
A big thanks @Valzheimer and @CaymanStudios for not forgetting the Gen 3s. Your products make them useful in so many new and exciting ways!
VYK Boopsie wearing clothes from Fabiana Kissin Cheeks for Kids 4.
This one is a promo I did for the WTA Exp. It's the Tail Gunner for V3 by ElorOnceDark on both V7 and Teen Josie 7, and I used the Kicker boots from the Tail Gunner Expansion on Teen Josie 7. Smoothing on all pieces - the crotches of the shorts can go a bit wonky, but smoothing and posing can go a long way to fix that.
click for larger.
This one is the old "M3 Hardcore" by Uzilite on Victoria 7. Worked really well! the belt for the gun was a bit wonky, but still good. Click for larger.
Oh wow, they look great! Nice job, jakiblue!
Haltia outfit for V3 by Awful Soul
Does anyone have this please,
https://www.daz3d.com/veronica-year-three
I'm wondering how it will convert, especially the coat.
Also the Scorpio Rising outfit by AS
Thanks
I've been curious about that Veronica Year Three outfit also - hopefully someone has it and can try it out.
The Scorpio Rising outfit - I know one of our promo artists used it and it came out pretty good! I'll try and find her and get her to post it here for you.
@Scorpio, I don't know if you're on FB but this is the link to Sandra's image:
here
Thanks Llynara! One of the reasons I was so excited about WTA Exp was that it meant I could use my favourite @ElorOnceDark outfits again LOL.(a hint for him to remake some of them for G3F/M heh heh)
This is his Kyouran outfit for V3. The sword props for the back, I just manually fitted as they were really easy - they pretty much load exactly on the back where you want them, and I just parented it to V7's chest. There was some slight texture stretching on her crotch there - either postwork it, or if you used a dark colour iray shader, you should be able to get away with it. :) Again, I just put the default Iray shader on this. click for larger.
Copying Jaki with using the hardcore set for m3 :P (well minus jacket,idk why just liked the way she looked with out it) Now i have to pick up the old uzilite stuff for the (orginal) 3 series. (i started well into the life of vicky 4 and aiko 4 so never used got a lot of the really old stuff.unless it was in a bundle or free)
Yes, I have Veronica Year Three. I can render that today. Doesn't look like I have Scorpio Rising. Sorry.
@jakiblue and @direbunny Those outfits look great! Isn't it amazing how well some of them convert to Iray? I was astounded the first time I tried that with Blue Moods for The Dress. Very excited to be able to use those on V7. I think I have almost all of the textures for it now and will post some renders soon.
Jaki- what background set is that behind her? She looks like she's on the Death Star. Very cool!
It's this one: https://www.daz3d.com/collective3d-portrait-vignettes-sci-fi-3
It must have been a PC freebie or something last year....I got it for nothing back in June.
LOL, I have it too and forgot I owned it. Thanks for reminding me!
ha! i do that all the time :) :)
A couple of test renders of Veronica Year 3 on one of my favorite characters, BD Esther for V7 (she's on the cover of my first Black Kat book.)
I love Uzilite's products/ He (or she?) always puts a ton of morphs in them, and some of them are quite funny (OMG, check out M3's underwear, that's freaking hilarious!)
Anyhow, there are lots of items in the set. The suit fits very well on Esther's ample curves (she's got quite a back end!) I just threw Uber on everything. The gloves are two toned, but the color can be changed easily in the surfaces tab. There are a couple items that didn't fit quite right- the "Heartbreaker" (bracer blades) and "FaithKeeper" (sword). They will take some extra fiddling. Perhaps don't fit them but position them how you want and then parent them instead. I'll try that next along with the mask and helmet.
The collar on the jacket crumples up. I've seen the same thing on a couple of other Uzilite items. It's something with autofit and the bones. I found a tutorial on Evil Innocence's Cross Dresser documentation on those to fix this in Poser, but no info on how to fix in DAZ. I think it needs deformers or a correction in the joint editor. I need to figure out how to do this because I'm using The Marquis for M4 on my next book cover and have this same issue with the collar.
I'll play some more with the morphs and get that helmet and mask on.