Loading...
> >

Let's appreciate/discuss today's new releases - ongoinger still further thread

1…2223242628

Comments

  • barbultbarbult Posts: 27,528

    DoctorJellybean said:

    barbult said:

     I don't like Daz Studio acting like it needs to save me from myself on my own computer.

    MS\Windows has been doing that for years.  

    That's no excuse! laugh 

  • jmucchiellojmucchiello Posts: 2,147

    DoctorJellybean said:

    barbult said:

     I don't like Daz Studio acting like it needs to save me from myself on my own computer.

    MS\Windows has been doing that for years. 

    Be nice if Linux was supported by Daz, the company.

  • tsroemitsroemi Posts: 3,623

    Matt_Castle said:

    To be entirely clear, while I said that the Khrushchoba set might be usable for some places near me in the UK, that's not to say that I think that things are completely interchangable.

    This is a place I remember going past to get to a friend's house when I was younger, and... hey, with a brick texture swap, not entirely different.

    However, definitely not exact, and while swapping out a single shader would be one thing, the less of the original product I need to replace because of quality, the less it adds up to buy a not-quite right product and the more it would just make sense for me to model something closer from scratch.

    Sorry I'm so late to the discussion, couldn't find the time to post - I reall need to say how much the product also reminds me of many, many housing blocks you can find in Berlin in the 'not suburbs but not city center either' areas (both former parts, so not just in the ex-Soviet controlled areas)  Like Matt shows here, I think the basis is a cheap building style from the 60s or something like that that was used all over Europe in variations. I'm so happy to find this on here, even if the quality really isn't all that great!

  • WendyLuvsCatzWendyLuvsCatz Posts: 41,573

    we have them down here even in Australia  too though not common

    flats in poorer areas, mostly redeveloped now

  • davidwski_16294691f0davidwski_16294691f0 Posts: 167

    gwalla_2536c3a4a6 said:

    davidwski_16294691f0 said:

    gwalla_2536c3a4a6 said:

     

    XI Busy Crossing

    Another slice of modern Japan from Xivon, this one clearly inspired by the area around Shibuya Station with its famous scramble crossing (it's not an exact match, but it's damn close). Unfortunately, just like the last one it looks like some signs have mirrored text. Why? With all the apparent attention to detail, how does that happen?

    The reason for the signs could be that written Japanese can be read from right to left, depending on the particular use. When I was there, it was common for magazines to be read from right to left, with text on the pages following this.  Signs could be either. 

    You're a little confused. The pages of Japanese books and magazines are in the opposite order to Western books (spine on the right instead of spine on the left), but Japanese text is never written right-to-left, like Arabic or Hebrew. When it's written horizontally, it's written left to right. When it's written vertically (which is more traditional), it is written top to bottom, and the columns of text (equivalent to whole lines in horizontal text) go right to left. And in neither case are the characters themselves flipped backwards. The only languages I know of that ever did that are Egyptian hieroglyphics and (sometimes) ancient Greek.

    So no, that doesn't explain anything here 

    I guess not. I can't answer for Kanji lettering, so my assumption was based on the right to left magazine formats I saw, and that when I was in Iwakuni in 1979-1980, there were multi-language Japanese/English signs posted in some places, even in the train station, where english words were spelled backwards (not mirrored) - under the Japanese text. 

  • AsuCafeAsuCafe Posts: 537
    edited September 6

    Regardless of left-right order, this is a mirror error.

    This error is common in Xivon products.

     

    0906XA.JPG
    1143 x 678 - 103K
    0906x2.JPG
    662 x 966 - 69K
    Post edited by AsuCafe on
  • davidwski_16294691f0davidwski_16294691f0 Posts: 167
    edited September 6

    I think that's already been pointed out... more than once... but thanks for pointing it out... again. 

    Post edited by davidwski_16294691f0 on
  • AsuCafeAsuCafe Posts: 537

    davidwski_16294691f0 said:

    gwalla_2536c3a4a6 said:

    davidwski_16294691f0 said:

    gwalla_2536c3a4a6 said:

     

    XI Busy Crossing

    Another slice of modern Japan from Xivon, this one clearly inspired by the area around Shibuya Station with its famous scramble crossing (it's not an exact match, but it's damn close). Unfortunately, just like the last one it looks like some signs have mirrored text. Why? With all the apparent attention to detail, how does that happen?

    The reason for the signs could be that written Japanese can be read from right to left, depending on the particular use. When I was there, it was common for magazines to be read from right to left, with text on the pages following this.  Signs could be either. 

    You're a little confused. The pages of Japanese books and magazines are in the opposite order to Western books (spine on the right instead of spine on the left), but Japanese text is never written right-to-left, like Arabic or Hebrew. When it's written horizontally, it's written left to right. When it's written vertically (which is more traditional), it is written top to bottom, and the columns of text (equivalent to whole lines in horizontal text) go right to left. And in neither case are the characters themselves flipped backwards. The only languages I know of that ever did that are Egyptian hieroglyphics and (sometimes) ancient Greek.

    So no, that doesn't explain anything here 

    I guess not. I can't answer for Kanji lettering, so my assumption was based on the right to left magazine formats I saw, and that when I was in Iwakuni in 1979-1980, there were multi-language Japanese/English signs posted in some places, even in the train station, where english words were spelled backwards (not mirrored) - under the Japanese text. 

    I believe you have witnessed the changes of history.

    I only saw Chinese characters written from right to left when I was a child. Because Chinese is traditionally written vertically, from right to left, horizontal writing is also done from right to left. Japanese and Korean should be the same; for a time, both left-to-right and right-to-left writing existed simultaneously. However, after Western culture spread throughout the world, right-to-left writing can only be seen in historical sites (or as a product of some ancient culture).

     

  • AsuCafeAsuCafe Posts: 537
    edited September 6

    https://www.daz3d.com/atn-japanese-budget-apartment

    After carefully inspecting it after purchasing it, I was amazed by the sheer number of details this product has. All the doors, windows, and cabinet doors can be opened; the refrigerator and microwave can be opened; all the faucets can be rotated; the clothesline on the balcony can be raised and lowered, and its switch can also be rotated; the rice cooker can be opened, its handle can be turned, and it even has an inner pot; even the toilet paper dispenser has a movable design.

    If the microwave knobs could turn, the clock could turn, and the lids of the kettle and all the bottles could be opened, that would utterly terrify me.

    When was the last time I saw such an intricately designed room? I don't recall. Please tell me about other rooms and houses with such incredible detail.

    090axxa.JPG
    1203 x 1039 - 150K
    000000099966.JPG
    708 x 937 - 38K
    0000999966j.JPG
    592 x 631 - 31K
    Post edited by AsuCafe on
  • memcneil70memcneil70 Posts: 6,113

    @AsuCafe, without losing my Sunday, I would offer https://www.daz3d.com/firstbastion#filtered=1 as a PA to look into. Some of the products I have bought over the years are no longer at DAZ.

    Look at https://www.daz3d.com/1stb-one-bedroom-downtown-condo-apartment

    And if you bought this back in the day: Modern Bungalow

    And I think I remember his motels had a lot of items that moved/opened. 

    Of course their is Roguey and Strangefate's wonderful https://www.daz3d.com/european-style-apartment.

    I know there are more, but these are two that screamed into my mind right away.

     

  • DasTriDasTri Posts: 245
    edited September 6

    Just piling up the last three Golden Tickets...

     

    Lake 2.jpg
    976 x 873 - 722K
    Lake 1.jpg
    976 x 873 - 596K
    Post edited by DasTri on
  • jmucchiellojmucchiello Posts: 2,147

    Beautiful

  • AsuCafeAsuCafe Posts: 537

    memcneil70 said:

    @AsuCafe, without losing my Sunday, I would offer https://www.daz3d.com/firstbastion#filtered=1 as a PA to look into. Some of the products I have bought over the years are no longer at DAZ.

    Look at https://www.daz3d.com/1stb-one-bedroom-downtown-condo-apartment

    And if you bought this back in the day: Modern Bungalow

    And I think I remember his motels had a lot of items that moved/opened. 

    Of course their is Roguey and Strangefate's wonderful https://www.daz3d.com/european-style-apartment.

    I know there are more, but these are two that screamed into my mind right away.

    Thank you. European apartments have always been on my list, but I didn't realize FirstBastion had such a beautiful apartment with a balcony and hallway, perfectly meeting my needs.

  • memcneil70memcneil70 Posts: 6,113

    BTW, if anyone has been wanting https://www.daz3d.com/european-style-apartment it is on sale today as Roguey and Strangefate have an item in the new products for sale.

  • richardandtracyrichardandtracy Posts: 8,072

    I do love the cat tree it comes with...

    Regards,

    Richard

  • memcneil70memcneil70 Posts: 6,113

    Yeah, that apartment is full of little jewels of real life. It is what makes it so special to me and I think to everyone else who has it.

  • joannajoanna Posts: 2,775

    I'm really happy to see FenixPhoenix's and Esid's FPE Magic Power Props. Not only it feels like the first "magic effects" set in a while, but also their products always have a lot of options. I mostly resolved to adding magic effects in postwork since a lot of existing products is either old or not the best quality, but that product might make me reconsider.

  • AsuCafeAsuCafe Posts: 537

    joanna said:

    I'm really happy to see FenixPhoenix's and Esid's FPE Magic Power Props. Not only it feels like the first "magic effects" set in a while, but also their products always have a lot of options. I mostly resolved to adding magic effects in postwork since a lot of existing products is either old or not the best quality, but that product might make me reconsider.

    This covers almost every kind of special effect, and it's rare to find one that includes rune patterns. My favorite is the slashing effect. Now I need to figure out how to piece together an order.

    I hope to release a martial arts-themed version in the future; it would be fantastic if it were in the style of traditional Chinese ink painting. 

  • FenixPhoenixFenixPhoenix Posts: 3,245

    @joanna and @Asucafe, thank you for the support! At first, this product was supposed to be small and have double the props, but I went crazy with textures, so we ended up splitting it into two packs. The second pack was submitted last week, and it does include at least 2 ink like options for one of the props! The effects leverage displacement a lot, so you can get different results just by playing with the displacement of each option. 

    Also, some of these will be hard to see in the viewport, so using the cartoon view to pose them will help you out! :)

  • AsuCafeAsuCafe Posts: 537
    edited September 8

    There's a second one! I hope it appears this month.

    And thank you for the tip, I will remember how to use it.

    Post edited by AsuCafe on
  • memcneil70memcneil70 Posts: 6,113

    joanna said:

    I'm really happy to see FenixPhoenix's and Esid's FPE Magic Power Props. Not only it feels like the first "magic effects" set in a while, but also their products always have a lot of options. I mostly resolved to adding magic effects in postwork since a lot of existing products is either old or not the best quality, but that product might make me reconsider.

    Thank you for pointing this out. I missed it totally and it is now in my cart. And reading that another pack is coming I will keep an eye out for it now. 

  • emanuela1emanuela1 Posts: 1,229

    Who is the little robot that is in the promo images of T3d Sylvie HD for Genesis 9 Feminine (today GT)?

     

  • MissLeahMissLeah Posts: 247

    emanuela1 said:

    Who is the little robot that is in the promo images of T3d Sylvie HD for Genesis 9 Feminine (today GT)?

     

     That's Scrappy, over at Rendo: https://www.renderosity.com/marketplace/products/158302/scrappy.

  • ElorElor Posts: 4,123

    I'm still searching for her 'warm smile influenced by her French roots' on the various promo renders angel

    https://www.daz3d.com/t3d-sylvie-hd-for-genesis-9-feminine

  • jmucchiellojmucchiello Posts: 2,147

    Elor said:

    I'm still searching for her 'warm smile influenced by her French roots' on the various promo renders angel

    https://www.daz3d.com/t3d-sylvie-hd-for-genesis-9-feminine

    You're giving the vibrant personality a pass? :) :)

  • joannajoanna Posts: 2,775

    Elor said:

    I'm still searching for her 'warm smile influenced by her French roots' on the various promo renders angel

    https://www.daz3d.com/t3d-sylvie-hd-for-genesis-9-feminine

    And I can't get over the length of her neck. She's a really nice character, but that neck...! And I know I could use morphs to make it shorter, but... yeah, that neck!

  • joannajoanna Posts: 2,775

    memcneil70 said:

    joanna said:

    I'm really happy to see FenixPhoenix's and Esid's FPE Magic Power Props. Not only it feels like the first "magic effects" set in a while, but also their products always have a lot of options. I mostly resolved to adding magic effects in postwork since a lot of existing products is either old or not the best quality, but that product might make me reconsider.

    Thank you for pointing this out. I missed it totally and it is now in my cart. And reading that another pack is coming I will keep an eye out for it now. 

    If you get both of today's Golden Tickets, you can use today's special coupon and get 30% extra off it. It is about $3 cheaper that way.

  • caravellecaravelle Posts: 2,776

    I heroically resisted for a whole day, but then FPE Magic Powers Props somehow found their way into my cart... ;-) I already own loads of Magic stuff, but when FPE does something like this, I just can’t resist. The design and the endless possibilities for variation are always worth the money. I’m already really looking forward to the second part!

  • TaozTaoz Posts: 10,351
    edited September 8

    Well T3D Sylvie does indeed have a long and also thin neck, compared to her T3D sister Mila.  And she can produce a nice smile if you push the right button. 

    T3D - Sylvie and Mila.png
    1000 x 724 - 1M
    Post edited by Taoz on
  • FenixPhoenixFenixPhoenix Posts: 3,245
    edited September 8

    @memcneil70 and @caravelle, thanks for your support! I didn't do it with this pack (because I didn't think about it), but pairing the FPE Magic Powers Props with ghost lights to create light without having to increase the luminance value of the props (since then you lose some of the texture details) gives fantastic results. I will see if I can re-do one of the promos to showcase this and post here as an example. 

    Post edited by FenixPhoenix on
Sign In or Register to comment.