Realistic Renders... NOT!! 12 "And we're back in the room!"

145791050

Comments

  • kyoto kidkyoto kid Posts: 40,501
    edited March 2013

    Hi,
    Good ... Here some of my renders.
    Render in PoserPro2012
    rendering each time: 2 minutes each.
    thank

    ...very nice.

    You must have a very good system to render each of those in 2 min.

    Of course I noticed PP2010 rendered much quicker even on my old 32 bit system (even with advanced lighting effects) than DaStudio3A.

    Post edited by kyoto kid on
  • jorge dorlandojorge dorlando Posts: 1,156
    edited December 1969

    Kyoto Kid said:
    Hi,
    Good ... Here some of my renders.
    Render in PoserPro2012
    rendering each time: 2 minutes each.
    thank

    ...very nice.

    You must have a very good system to render each of those in 2 min.

    Of course I noticed PP2010 rendered much quicker even on my old 32 bit system (even with advanced lighting effects) than DaStudio3A.

    Thank you!
    By the way, my machine is a core i7 2600, with 8 gigs of ram ddr3 memories, and geoforce GTX560

  • kyoto kidkyoto kid Posts: 40,501
    edited December 1969

    ...geez I hate it when I typo something and it ends up quoted.

    We need a real spell checker on which you can add to the dictionary. I add things to the FF one but it never seems to remember them the next time I sign on.

  • ArtiniArtini Posts: 8,500
    edited March 2013

    Hi,
    Good ... Here some of my renders.
    Render in PoserPro2012
    rendering each time: 2 minutes each.
    thank

    Very good renders. And that is the magic of Poser - the ability to render fast, the hair. I am still trying to find the solution
    to rendering the hair fast in Daz Studio. Depending of the type of hair and light setup, adding the hair to the scene
    can increase the rendering time of an hour or so in Daz Studio. There are some exceptions and I try to find them.
    Caribbean Queen Hair is one of them.
    http://www.daz3d.com/caribbean-queen-hair
    Post edited by Artini on
  • kyoto kidkyoto kid Posts: 40,501
    edited March 2013

    ...yeah, the transmaps are a killer when using 3Delight with raytracing. I've used Firefly with both raytracing and AO and the longest render (with April's Osean Hair) was something like 14 minutes. If I used Ray tracing in Daz Studio I'd usually run out of memory (32 Bit) and the render would crash.

    If you have Ubersurface (3Advanced and 4.5 both have it as a built in plugin), you can selectively turn the raytracing off for the hair.

    Post edited by kyoto kid on
  • kyoto kidkyoto kid Posts: 40,501
    edited December 1969

    ...Leela's elfin tomboy friend Tracey all dolled up for a very special day.


    Used my portrait studio light set.

    tracey_goddess.jpg
    600 x 848 - 336K
  • ArtiniArtini Posts: 8,500
    edited December 1969

    Thanks for the tip about Ubersurface for the hair, Kyoto Kid. I will run the tests to see, how it works.

  • ArtiniArtini Posts: 8,500
    edited December 1969

    Kyoto Kid said:
    ...Leela's elfin tomboy friend Tracey all dolled up for a very special day.


    Used my portrait studio light set.


    Looking good, Kyoto Kid.
  • jorge dorlandojorge dorlando Posts: 1,156
    edited December 1969

    ... And more ...

    Render_7.png
    900 x 533 - 292K
    Render_4.png
    900 x 533 - 233K
  • glaseyeglaseye Posts: 1,305
    edited December 1969

    Kyoto Kid said:
    ...Leela's elfin tomboy friend Tracey all dolled up for a very special day.

    Nice... :)

    Still working on some more portrait work
    Custom dialed genesis character with Mada's daydream outfit
    Used InaneGlory's Photo Studios Lights 3 as a base
    Rendered in DS4.5 Pro with DoF enabled

    Aisha+Dougie_PS3_DAZ.jpg
    1000 x 1500 - 403K
  • kyoto kidkyoto kid Posts: 40,501
    edited December 1969

    ..thank you.


    That's so sweet.

  • kyoto kidkyoto kid Posts: 40,501
    edited December 1969

    ... And more ...

    ...meet "Mr Johnson".

    Nicely done

  • jorge dorlandojorge dorlando Posts: 1,156
    edited December 1969

    Kyoto Kid said:
    ... And more ...

    ...meet "Mr Johnson".

    Nicely done

    Thank you.
    these were also rendered in PP2012.
    Also less than 2 minutes each.
    The mayor is the pig of frankie nursoda.
    the security agent is an original model for C4D, but "adapted" = (new rigging) for Poser.
    http://www.the3dstudio.com/product_details.aspx?id_product=42773

  • DireBunnyDireBunny Posts: 556
    edited December 1969

    I was just playing around with the flaming skulls prop in IgnisSerpentus's Azraella set and came up with this.

    lillyth_banner_x_sig_finished_jpg.jpg
    2000 x 600 - 432K
  • DireBunnyDireBunny Posts: 556
    edited December 1969

    I would just add this in as an edit to my previous post but i have really bad luck editing in new pictures into a post for some reason so anyway.....

    Had an idea i wanted to test out using the previous posts picture.

    Lilly_comic_2_jpg.jpg
    1193 x 600 - 330K
  • kyoto kidkyoto kid Posts: 40,501
    edited December 1969

    ...nice. love the flaming skull effects on the guns.


    Another workstation test drop using UE.


    ...guess who's back....?

    kelly_test.jpg
    600 x 848 - 446K
  • DireBunnyDireBunny Posts: 556
    edited December 1969

    I can't really can't much credit for the skull effects, that is what teh skull props look like. i rendered those in the same scene and didn't touch them with any postwork.
    they have a ton of morphs too so really as far as teh skulls go i didn't do much.

  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    Whoops!

    A bit remiss of me not to check my own thread when notifications yet again went AWOL!

    Anyhow, great renders folks. I'm building stuff to use even though I haven't time to use it. I took full advantage of the March Madness and bought all 3 sets of Lantios core lights. With those and the Interjections stuff I should be able to knock out some nice stuff. Not sure when as I still have 1/6 projects to clear and I need to focus and take my time on those, hand painting requires much more concentration than 3D does I can tell you!

    Keep 'em coming...

    CHEERS!

  • DireBunnyDireBunny Posts: 556
    edited December 1969

    I think I'm going to stick with my demon girl Lillyth for a few pictures.

    No hell fire this time. this was just suppose to be a quick render for myself that i was probably gonna scrap but decided to see what i could do with it instead.

    Lilly of the valley

    Lilly_of_the_valley_s_jpg.jpg
    1434 x 600 - 461K
  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    Very nice render!

    CHEERS!

  • DireBunnyDireBunny Posts: 556
    edited December 1969

    thanks.

    It was interesting to work on.

  • BobvanBobvan Posts: 2,652
    edited December 1969
  • BobvanBobvan Posts: 2,652
    edited March 2013
  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    Great stuff Bob,

    Interesting is something I need to work more on in 3D, I'll get there....

    CHEERS!

  • BobvanBobvan Posts: 2,652
    edited March 2013

    Thanks I been "away" cause my latest chapters have not exactly been family materials. I am sending my machine for servicing (HP notebook that I drive hard as you well know from ALL the renders) Then I am going to brave win 8 (with the win 7 style start menu included)
    I think it may run some stuff smoother. As I mentioned above I purchased a 2 T drive and will be keeping all of my content on it (Backed up to my other 1T drive of course) I may stay with this machine past 2 years if I can re extend the warranty since it does what I need good on ya for the monster system Kyyoto no more "My slow system pukes and chokes" LOL!!

    Looking forward to R3 for DS later this summer..

    Post edited by Bobvan on
  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    I trust you took some of the less family friendly stuff off your hard drive before you took it to be serviced!

    I really like Windows 8, I use Classic Shell to bypass the Metro screen and it runs like a dream. The only AV I use is what W8 comes with, it takes hardly any memory up and is bloatware free. DS likes W8 too.

    Personally, I wouldn't extend the warranty as, once it's run out, you can do away with all the manufacturer bloatware. My system is a load faster since I did that.

    Have fun

    CHEERS!

  • BobvanBobvan Posts: 2,652
    edited December 1969

    Thats fantastic news! Alot of stuff runs so laggy including DS I read elsewhere that DS runs much better with it too. I think Lux works about the same. A guy at work is doing the upgrade he will most likely get rid of the bloatware. I need the service plan due to the fact I am not running a monster tower with cross air industrial fans.. I am going to have a recovery of the win 8 install..

  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    I use a cooler platform with mine, it's a Coolermaster Notepal U Stand and it does make a lot of difference. It also has several useful USB ports.

    CHEERS!

  • BobvanBobvan Posts: 2,652
    edited December 1969

    I do too..

  • RogerbeeRogerbee Posts: 4,460
    edited December 1969

    I see,

    Under the power settings, there's a way to change the laptop cooling from active to passive, it doesn't run as hot when you do that. It runs up during any renders I do, but not as much as it used to.

    CHEERS!

This discussion has been closed.