Loading...
> >

Star Trek Builders Unite 7: The Continuing Mission

1…7576788081…101

Comments

  • GRFK DSGN UnlimitedGRFK DSGN Unlimited Posts: 1,118
    sasuraibito said:

    It's been a while since I have posted anything, but like any writer you still go through revisions before you prepare your final draft. Right now I finally have an idea  where I am going with it. 

    Is it just me or do the characters seem to be floating in the first image? There doesnt seem to be any shadows under their feet.

  • Will DeckerWill Decker Posts: 188
    GRFK DSGN Unlimited said:
    sasuraibito said:

    It's been a while since I have posted anything, but like any writer you still go through revisions before you prepare your final draft. Right now I finally have an idea  where I am going with it. 

    Is it just me or do the characters seem to be floating in the first image? There doesnt seem to be any shadows under their feet.

    I was looking at that. Whenever I pose them in the seats, their feet don't reach the ground for some reason. 

  • twistkilltwistkill Posts: 44
    sasuraibito said:
    GRFK DSGN Unlimited said:

    Is it just me or do the characters seem to be floating in the first image? There doesnt seem to be any shadows under their feet.

    I was looking at that. Whenever I pose them in the seats, their feet don't reach the ground for some reason. 

    Maybe the feet are not reaching the floor, but I think lack of any shadow there makes it seem more floating...

  • Will DeckerWill Decker Posts: 188

    Did some work on a poster of the Prime versions of the Forrestal's Crew.

    Sledgehammer Trista and 0790 Prime Timeline .jpg
    1280 x 2108 - 1M
  • GeorgehazeGeorgehaze Posts: 187
    rschulte said:

    STO "LMFlyer Jacket for V4 and M4"

    This texture set will allow you to convert the "LM Flyer Jackets" on DAZ3d.com to a Star Trek style battle jacket...  this can be purchased at: http://www.daz3d.com/flyer-jacket-for-m4-and-v4

    There are three different styles and uses the TNG Division Color scheme.  A nice feature is the jacket can be worn over the bodysuit.  This can be worn with any of my Star Trek texture sets...This texture set has options to hide the front pockets, name patch, and zippers.

     

    http://www.sharecg.com/v/86933/browse/11/Poser/STO-LMFlyer-Jacket-for-V4-and-M4

    I'm curious to see how the jacket would look with no collar at all.

  • rschulterschulte Posts: 489
    edited January 2017
    Georgehaze said:
    rschulte said:

    STO "LMFlyer Jacket for V4 and M4"

    This texture set will allow you to convert the "LM Flyer Jackets" on DAZ3d.com to a Star Trek style battle jacket...  this can be purchased at: http://www.daz3d.com/flyer-jacket-for-m4-and-v4

    There are three different styles and uses the TNG Division Color scheme.  A nice feature is the jacket can be worn over the bodysuit.  This can be worn with any of my Star Trek texture sets...This texture set has options to hide the front pockets, name patch, and zippers.

     

    http://www.sharecg.com/v/86933/browse/11/Poser/STO-LMFlyer-Jacket-for-V4-and-M4

    I'm curious to see how the jacket would look with no collar at all.

    The coller does not have its own material zone, so you will have to create a trans map to hide it...

    LMFlyer01.png
    983 x 898 - 546K
    Post edited by rschulte on
  • rschulterschulte Posts: 489
    edited January 2017

    Star Trek Online Combadges Beyond

    Included here are 13 sets of Lo-poly ComBadge props which I had created with primatives to support any of the Star Trek M4/V4 Bodysuits or Uzilite The New Adventures textures sets I have created.  These are inspired by the "Renegade Trek" and other non-canon Future Trek stories (ie 25 Century and later).

    Material mats are provided to change the badges colors to gold, silver, black and white, or use your own... For M4 and V4, but can be re-parented to anyone.  Objs are provided.

    https://www.sharecg.com/v/87026/browse/11/Poser/Star-Trek-Online-Combadges-Beyond

     

    STOBeyond Badges.jpg
    824 x 898 - 70K
    STOBeyond BadgesA.jpg
    824 x 898 - 50K
    STOBeyond BadgesB.jpg
    824 x 898 - 52K
    Post edited by rschulte on
  • rschulterschulte Posts: 489
    edited January 2017

    Had to fix something,  here is the updated NX-01 Enterprise flight jacket for the LM Flyer jacket..

    At this point, I'm debating doing one for the other NX cruisers from "ST:Enterprise": Intrepid (NX-07), Discovery (NX-04), Columbia (NX-02), Challenger (NX-03)

    NET Jacket 01.png
    824 x 898 - 476K
    NET Jacket 02.png
    824 x 898 - 531K
    Post edited by rschulte on
  • rschulterschulte Posts: 489

    Star Trek Online Combadges Defiant

    Included here are 7 sets of Lo-poly ComBadge props which I had created with primatives to support any of the Star Trek M4/V4 Bodysuits or Uzilite The New Adventures textures sets I have created.  These are inspired by the USS Defiant insignia which would have been used for Star Fleet should she finished the "Historic 5 year Journey to seek out and explore new worlds" before the Enterprise.

    Material mats are provided to change the badges colors to gold, silver, black and white, or use your own... For M4 and V4, but can be re-parented to anyone.  Objs are provided.

    https://www.sharecg.com/v/87030/browse/11/Poser/Star-Trek-Online-Combadges-Defiant

     

    sTOCombadgesDefiant.png
    824 x 898 - 524K
  • twistkilltwistkill Posts: 44

    I finally finished going through a ton of pages and found that lurok91 had created DS9 bridge in 2013. Does anyone still have a working link or file? Any help would be much appreciated...

  • rschulterschulte Posts: 489
    edited January 2017
    twistkill said:

    Twistkill,  The files you're looking for are from Bridge Commander, that site was closed down recently so I'm not certain how you can find them..  Looks like those sites  that are still working do not have these files on them...

    STO15B M4V4BS REBOOT again......I wanted to clean up my ST:TOS bodysuits for M4 and V4 (STO15) for some time, and here are the promo images for them .  I included new settings for both the specular and bumps...   I believe they came out much better than the original and I intend to post soon...  I'm planning to just delete the old STO15s and just use these instead....

    They support both the TOS and TNG divisional colors...

    I'm using the latest combadges I posted...

    STO15B M4 Gold01.png
    824 x 898 - 359K
    STO15B M4 Red.png
    824 x 898 - 344K
    STO15B M4 Medical.png
    824 x 898 - 279K
    STO15B V4 CaptV.png
    983 x 898 - 408K
    STO15B M4BS01.png
    983 x 898 - 397K
    STO15B V4 Gold.png
    824 x 898 - 366K
    Post edited by rschulte on
  • rschulterschulte Posts: 489

    Star Trek Online #15B for M4V4 Bodysuits:

    https://www.sharecg.com/v/87051/browse/11/Poser/Star-Trek-Online-15B-for-M4V4-Bodysuits

  • rschulterschulte Posts: 489

    STO LMFlyer Jacket M4V4 for ST:Enterprise

    https://www.sharecg.com/v/87054/browse/11/Poser/STO-LMFlyer-Jacket-M4V4-for-STEnterprise

  • rschulterschulte Posts: 489

    Star Trek Online #15C for V4 Couragous:

    this is a companion set to the STO15B TOS reboot for M4V4 BS, thse are the dresses from TOS using V4 Courageous.

    https://www.sharecg.com/v/87055/browse/11/Poser/Star-Trek-Online-15C-for-V4-Couragous

     

  • rschulterschulte Posts: 489

    FYI....  Files updated...

    Wanted to tone down or change the material settings on the following texture sets.... hope you like the difference...

    Star Trek Online #19a M4V4BS - Cadets
    http://www.sharecg.com/v/77697/gallery/11/Poser/Star-Trek-Online-19a-for-M4V4-UPG

    Star Trek Online #19b for M4V4BS - Kelvin
    http://www.sharecg.com/v/77696/gallery/11/Poser/Star-Trek-Online-19b-for-M4V4

    Star Trek #14a for Uzilite's New Adventure - Captains wrap-around
    http://www.sharecg.com/v/77586/gallery/11/Poser/Star-Trek-14a-for-Uzilites-New-Adventures-UPG

     

    Inprogress:

    Star Trek #14 for Uzilite's New Adventures TOS

    Star Trek #19c for M4B4BS Flightsuit

     

  • rschulterschulte Posts: 489

    the following were upgraded to fix the material settings....

    Star Trek Online #19c for M4V4 - JJAbrams flightsuit
    https://www.sharecg.com/v/77935/gallery/11/Poser/Star-Trek-Online-19c-for-M4V4-UPG

    Star Trek #14 for Uzilite's New Adventures UPG - TOS
    https://www.sharecg.com/v/77435/gallery/11/Poser/Star-Trek-14-for-Uzilites-New-Adventures-UPG

    Star Trek TNGEra Troi for V4 Bodysuit UPG
    https://www.sharecg.com/v/77225/gallery/11/Poser/Star-Trek-TNGEra-Troi-for-V4-Bodysuit-UPG

  • twistkilltwistkill Posts: 44

    Guys,

    I had created a morph for V4 long time back and saved it as an .obj file. I can load it on the V4 still. Is there any way to load it onto a G3? I got the genX plugin thinking it will be easy, but I just cannot figure out how to save it so genx can convert it. Help me!

  • SpottedKittySpottedKitty Posts: 7,232

    There isn't a GenX plugin yet that handles transfers to G3 — I haven't heard anything about this for a while.

  • grinch2901grinch2901 Posts: 1,247
    SpottedKitty said:

    There isn't a GenX plugin yet that handles transfers to G3 — I haven't heard anything about this for a while.

    Sure there is:  http://www.daz3d.com/genx2-addon-for-genesis-3

  • grinch2901grinch2901 Posts: 1,247
    edited January 2017
    twistkill said:

    Guys,

    I had created a morph for V4 long time back and saved it as an .obj file. I can load it on the V4 still. Is there any way to load it onto a G3? I got the genX plugin thinking it will be easy, but I just cannot figure out how to save it so genx can convert it. Help me!

    To get stuff out of V4 that I liked I did the following: I applied all the morphs I wanted to V4, I also used morph loader to load morphs from external OBJs.  Then I exported (not save, export) as a CR2 in a location that's easy to find (like in the same directory V4 base is saved). Now in GenX 2 you can Load Figure and pick that CR2 that you saved, it will load in V4 with all the morphs you need.  You can now transfer whichever you want to any figures you have the proper plugins for.  You'll need the GenX2 add on for Genesis 3 to get it onto G3F or G3M and maybe the add on for Genesis 2 too.  The "required products" says you need both, I have both but I can't be sure if you really need the genesis 2 add-on to transfer morphs to G3F from V4 as opposed to from G2F (or male equivalents).  

    Hope that helps.

    Post edited by grinch2901 on
  • SpottedKittySpottedKitty Posts: 7,232
    grinch2901 said:
    SpottedKitty said:

    There isn't a GenX plugin yet that handles transfers to G3 — I haven't heard anything about this for a while.

    Sure there is:  http://www.daz3d.com/genx2-addon-for-genesis-3

    <headdesk> How did I miss that? OK, adding it to my wishlist.

  • AshleyTingerAshleyTinger Posts: 498
    rschulte said:

    Star Trek Online Combadges Defiant

    Included here are 7 sets of Lo-poly ComBadge props which I had created with primatives to support any of the Star Trek M4/V4 Bodysuits or Uzilite The New Adventures textures sets I have created.  These are inspired by the USS Defiant insignia which would have been used for Star Fleet should she finished the "Historic 5 year Journey to seek out and explore new worlds" before the Enterprise.

    Material mats are provided to change the badges colors to gold, silver, black and white, or use your own... For M4 and V4, but can be re-parented to anyone.  Objs are provided.

    https://www.sharecg.com/v/87030/browse/11/Poser/Star-Trek-Online-Combadges-Defiant

     

    That gives me a few ideas right there. Nice job!   I really like the Beyond combadges you have as well. Good stuff. 

    sasuraibito said:

    Did some work on a poster of the Prime versions of the Forrestal's Crew.

    Really love that you've kept working on these. This one and the others from the previous page have me intrigued. 

  • twistkilltwistkill Posts: 44
    grinch2901 said:

    To get stuff out of V4 that I liked I did the following: I applied all the morphs I wanted to V4, I also used morph loader to load morphs from external OBJs.  Then I exported (not save, export) as a CR2 in a location that's easy to find (like in the same directory V4 base is saved). Now in GenX 2 you can Load Figure and pick that CR2 that you saved, it will load in V4 with all the morphs you need.  You can now transfer whichever you want to any figures you have the proper plugins for.  You'll need the GenX2 add on for Genesis 3 to get it onto G3F or G3M and maybe the add on for Genesis 2 too.  The "required products" says you need both, I have both but I can't be sure if you really need the genesis 2 add-on to transfer morphs to G3F from V4 as opposed to from G2F (or male equivalents).  Hope that helps.

     

    Thank you Grinch! I am gonna try that tonight :)

  • blutobluto Posts: 912

    hey guys , yea i know ive been kind of quioet for a while . i need yall to help me decide on which version to use i had a friend of mine make a hybred figure of the new voyages duty uniform and dress

     

    Render 2.png
    863 x 832 - 290K
    Render 3.png
    863 x 832 - 284K
  • CricketCricket Posts: 476

    I like the second one (black skirt) best, but maybe try it without the "pants". Maybe try stockings?

  • rschulterschulte Posts: 489
    bluto said:

    hey guys , yea i know ive been kind of quioet for a while . i need yall to help me decide on which version to use i had a friend of mine make a hybred figure of the new voyages duty uniform and dress

     

    The red skirt seems to more "canon" than the second..   You can still offer a optional black pair of pants if you want.

  • rschulterschulte Posts: 489
    edited February 2017

    STO17 Aeneas Tactical and Service uniform for M4V4 Bodysuits

    I wanted to create a uniform to replace the "Oddyssey" as official uniform for STO (circa 26-27th century),  I like how this turned out.... 3 tactical and 3 service options.  I might do a dress uniform if I get enough interest...These can be combined with my Ares and Mars uniforms...

    http://www.sharecg.com/v/87158/gallery/11/Poser/Star-Trek-Online-17-Aeneas-for-M4V4-Bodysuits

     

     

    STO17 Aeneas_Copy.jpg
    980 x 898 - 55K
    STO17 Aeneas2.jpg
    980 x 898 - 57K
    STO17 Aeneas3.jpg
    980 x 898 - 58K
    STO17 Aeneas4.jpg
    980 x 898 - 54K
    STO17 Aeneas5.jpg
    980 x 898 - 56K
    Post edited by rschulte on
  • rschulterschulte Posts: 489
    edited February 2017

    Plus one more.  As I was updated some of my older uniforms, the "TNGSkant set" made me want to this...

    STO TOS Kilt for M4 Valiant....

    http://www.sharecg.com/v/87183/gallery/11/Poser/Star-Trek-TOS-Kilt-for-M4-Valiant

    Please let me know if you like the changes and if there are any older uniforms you'd like to to take another look at..

    STO15D Kilt M4Valiant.jpg
    980 x 898 - 63K
    Post edited by rschulte on
  • JamesJABJamesJAB Posts: 1,766

    After a very long absence I will leave this little teaser here.  

    It's built from scratch as dynamic clothing using the pattern from "Starfleet TM:379260"

    (did I mention long absence, like 6 years... lol)  Some of you may remember me from my Original Series textures for M4 Valiant, V4 Courageous, Queen of Ages.

    TOS wip 01.jpg
    1539 x 877 - 134K
  • shadowhawk1shadowhawk1 Posts: 2,203

    Welcome back to the Starbase. The outfit looks awesome, can you tell me what figure this is for? 

This discussion has been closed.