Loading...
> >

Star Trek Builders Unite 7: The Continuing Mission

1…2728303233…101

Comments

  • mylochkamylochka Posts: 168
    edited August 2015

    If someone's looking for a project, I'd like something like the terrium-like things in these Matt Jefferies drawings -- particularly the tall one.  No plants necessary.  I may want to put something else in them at another time.

    STTOS_Sketch_ITITNB_Herbarium.jpg
    360 x 446 - 32K
    STTOS_Sketch_ITITNB_Planter.jpg
    346 x 428 - 20K
    STTOS_Sketch_ITITNB4.jpg
    360 x 446 - 32K
    Post edited by mylochka on
  • AshleyTingerAshleyTinger Posts: 498
    mdbruffy said:

    You're welcome. Hope the textures work for everyone.I'm not used to doing a set of clothing textures this detailed. Change a basic color or add an item or two, but I think the Chancellor's Outfit was the last time I had to go to this extreme for an outfit. You Daz Studio users let me know if they work, ok?

    Robert Freise said:

    Thanks for the uniforms

     

    Well they work, but I think the transparancey might need a little tweaking as I'm seeing some artifacts on the render around the bottom of the jacket, and I need to toy with the bump maps a bit, but other than that this is pretty much a straight render of the V4 and M4 outfits using iray. They look great. 

    dress whites up.jpg
    2116 x 2116 - 242K
  • AshleyTingerAshleyTinger Posts: 498
    mylochka said:

    If someone's looking for a project, I'd like something like the terrium-like things in these Matt Jefferies drawings -- particularly the tall one.  No plants necessary.  I may want to put something else in them at another time.

    If I wasn't in the middle of assembling the shuttlebay for the galaxy class and planning out a briefing room for the Connie refit I would totally work on these. 

  • mdbruffymdbruffy Posts: 2,345
    edited August 2015

    Well, they look great. In Poser 9, I had the transparency set to 2.0 and both edge and falloff set to 0.0. see if that helps.

    ashe5k said:
    mdbruffy said:

    You're welcome. Hope the textures work for everyone.I'm not used to doing a set of clothing textures this detailed. Change a basic color or add an item or two, but I think the Chancellor's Outfit was the last time I had to go to this extreme for an outfit. You Daz Studio users let me know if they work, ok?

    Robert Freise said:

    Thanks for the uniforms

     

    Well they work, but I think the transparancey might need a little tweaking as I'm seeing some artifacts on the render around the bottom of the jacket, and I need to toy with the bump maps a bit, but other than that this is pretty much a straight render of the V4 and M4 outfits using iray. They look great. 

     

    Post edited by mdbruffy on
  • mylochkamylochka Posts: 168
    ashe5k said:
    mylochka said:

    If someone's looking for a project, I'd like something like the terrium-like things in these Matt Jefferies drawings -- particularly the tall one.  No plants necessary.  I may want to put something else in them at another time.

    If I wasn't in the middle of assembling the shuttlebay for the galaxy class and planning out a briefing room for the Connie refit I would totally work on these. 

    I can wait. Got a ton of other projects going myself.  Take your time!

  • blutobluto Posts: 913

    mylochka , i might have some time to dedicate to this . i like the idea not only for botanicals but also for small lifeform habatats.

  • mdbruffymdbruffy Posts: 2,345
    edited August 2015

    Tam comes across this in her time- travels. Couldn't find one, so I made this one. But I have 2 things I need a second set of eyes for.

    1. Are the globs too big?

    2. Right now there's only one spotlight positioned in the base. Does it need more than that?

    Lava Lamp test 1.jpg
    632 x 787 - 49K
    Post edited by mdbruffy on
  • SpottedKittySpottedKitty Posts: 7,232

    The ones I've seen in the shops over the years vary a lot; sometimes lots of little blobs, sometimes big ones. Usually (I think) the only light is in the base. That looks OK, I'd say.

  • Robert FreiseRobert Freise Posts: 4,598

    Looks OK my mom had one and the at first it had several large blobs then it went to a bunch of little blobs and then it became one big blob

    the only light it had was in the bottom shining up through the green liquid it had

  • mdbruffymdbruffy Posts: 2,345

    Robert, Spotted Kitty, thanks. I'll go with it like it is then.

  • mylochkamylochka Posts: 168
    edited August 2015
    bluto said:

    mylochka , i might have some time to dedicate to this . i like the idea not only for botanicals but also for small lifeform habatats.

    Yeah, I was thinking it would be good for that sort of thing too.  I'm trying to equip a Star Fleet research lab for some illustrations. 

    Post edited by mylochka on
  • mdbruffymdbruffy Posts: 2,345

    Anyone know where I can find a folded flag? A properly folded flag. Textures don't matter, I'll make my own.

  • Robert FreiseRobert Freise Posts: 4,598

    Haven't been able to find one not even at TurboSquid

  • mdbruffymdbruffy Posts: 2,345
    edited August 2015

    I checked all the sites I usually deal with and  couldn't find any folded ones.

    I have the makings of one in a display case, but I need one outside the case- to be presented.

    Post edited by mdbruffy on
  • shadowhawk1shadowhawk1 Posts: 2,206
    mdbruffy said:

    I checked all the sites I usually deal with and  couldn't find any folded ones.

    I have the makings of one in a display case, but I need one outside the case- to be presented.

    It might be easier to go with a triangle prop or flatten a pyramid and texture one that way if it is going to be in a display box. I have wanted to do several images with a folded flag and I gave up because I couldn't find one. 

  • jaguarry3jaguarry3 Posts: 230
    edited August 2015
    mdbruffy said:

    I checked all the sites I usually deal with and  couldn't find any folded ones.

    I have the makings of one in a display case, but I need one outside the case- to be presented.

     Assuming you would,t need it for a close up you can have this one. It is a .obj file I made  which you should be able to import

     

    jpg
    jpg
    Folded Flag.jpg
    136K
    Folded Flag.jpg
    1483 x 942 - 136K
    Post edited by jaguarry3 on
  • jaguarry3jaguarry3 Posts: 230
    jaguarry3 said:
    mdbruffy said:

    I checked all the sites I usually deal with and  couldn't find any folded ones.

    I have the makings of one in a display case, but I need one outside the case- to be presented.

     Assuming you would,t need it for a close up you can have this one. It is a .obj file I made  which you should be able to import

     Assuming you would,t need it for a close up you can have this one. It is a .obj file I made  which you should be able to import   This new forums a  fight PIA to  use.

     

  • mdbruffymdbruffy Posts: 2,345

    Jaguarry3, that would work. I'll PM you with my e-mail.

    jaguarry3 said:
    jaguarry3 said:
    mdbruffy said:

    I checked all the sites I usually deal with and  couldn't find any folded ones.

    I have the makings of one in a display case, but I need one outside the case- to be presented.

     Assuming you would,t need it for a close up you can have this one. It is a .obj file I made  which you should be able to import

     Assuming you would,t need it for a close up you can have this one. It is a .obj file I made  which you should be able to import   This new forums a  fight PIA to  use.

     

     

  • mdbruffymdbruffy Posts: 2,345

    THere are no models of a folded flag on the internet. I have a model for one in a case, but I need one without a case.

    shadowhawk1 said:
    mdbruffy said:

    I checked all the sites I usually deal with and  couldn't find any folded ones.

    I have the makings of one in a display case, but I need one outside the case- to be presented.

    It might be easier to go with a triangle prop or flatten a pyramid and texture one that way if it is going to be in a display box. I have wanted to do several images with a folded flag and I gave up because I couldn't find one. 

     

  • mdbruffymdbruffy Posts: 2,345
    edited August 2015

    This was originally created for Nova Trek Book 8: Special Report. But I had to resurrect the jacket for this last story, You'll need M3 and M3's tunic to use these. There are only the jacket textures in this zip.

    http://mdbruffy.deviantart.com/art/Textures-for-the-Presidential-Jacket-557210411

    The Presidential Jacket.jpg
    517 x 821 - 57K
    Post edited by mdbruffy on
  • jaguarry3jaguarry3 Posts: 230
    mdbruffy said:

    Jaguarry3, that would work. I'll PM you with my e-mail.

    jaguarry3 said:
    jaguarry3 said:
    mdbruffy said:

    I checked all the sites I usually deal with and  couldn't find any folded ones.

    I have the makings of one in a display case, but I need one outside the case- to be presented.

     Assuming you would,t need it for a close up you can have this one. It is a .obj file I made  which you should be able to import

     Assuming you would,t need it for a close up you can have this one. It is a .obj file I made  which you should be able to import   This new forums a  fight PIA to  use.

     

    No Problem  sent this morning  Hope its useful

     

  • mdbruffymdbruffy Posts: 2,345

    Got it and I'm working with right now. Thanks!

    jaguarry3 said:
    mdbruffy said:

    Jaguarry3, that would work. I'll PM you with my e-mail.

    jaguarry3 said:
    jaguarry3 said:
    mdbruffy said:

    I checked all the sites I usually deal with and  couldn't find any folded ones.

    I have the makings of one in a display case, but I need one outside the case- to be presented.

     Assuming you would,t need it for a close up you can have this one. It is a .obj file I made  which you should be able to import

     Assuming you would,t need it for a close up you can have this one. It is a .obj file I made  which you should be able to import   This new forums a  fight PIA to  use.

     

    No Problem  sent this morning  Hope its useful

     

     

  • patience55patience55 Posts: 7,006
    mdbruffy said:

    This was originally created for Nova Trek Book 8: Special Report. But I had to resurrect the jacket for this last story, You'll need M3 and M3's tunic to use these. There are only the jacket textures in this zip.

    http://mdbruffy.deviantart.com/art/Textures-for-the-Presidential-Jacket-557210411


    Link posted. Thank you.

    M3's tunic is a PC item if anybody is interested.

     

  • mdbruffymdbruffy Posts: 2,345

    You're welcome.

    patience55 said:
    mdbruffy said:

    This was originally created for Nova Trek Book 8: Special Report. But I had to resurrect the jacket for this last story, You'll need M3 and M3's tunic to use these. There are only the jacket textures in this zip.

    http://mdbruffy.deviantart.com/art/Textures-for-the-Presidential-Jacket-557210411


    Link posted. Thank you.

    M3's tunic is a PC item if anybody is interested.

     

     

  • TimbalesTimbales Posts: 2,423

    Heads up for my fellow fans, Netflix will has switched over their TNG to HD remasters: http://www.darkhorizons.com/news/38639/netflix-adds-star-trek-tng-remasters

  • mdbruffymdbruffy Posts: 2,345

    Ready for download.  Have fun:

    http://mdbruffy.deviantart.com/art/24th-century-Wheel-Chair-557504339

    24th century wheel chair.jpg
    1392 x 1840 - 308K
  • Robert FreiseRobert Freise Posts: 4,598

    Thank You

  • mdbruffymdbruffy Posts: 2,345

    You're welcome.

    Robert Freise said:

    Thank You

     

  • AshleyTingerAshleyTinger Posts: 498
    mdbruffy said:

    Ready for download.  Have fun:

    http://mdbruffy.deviantart.com/art/24th-century-Wheel-Chair-557504339

    That's a neat design. Thanks for sharing!

  • mdbruffymdbruffy Posts: 2,345
    edited September 2015

    You're welcome. It's inspired by an early Next Gen episode.

    ashe5k said:
    mdbruffy said:

    Ready for download.  Have fun:

    http://mdbruffy.deviantart.com/art/24th-century-Wheel-Chair-557504339

    That's a neat design. Thanks for sharing!

     

    support chair.jpg
    659 x 690 - 363K
    Post edited by mdbruffy on
This discussion has been closed.