[Released] Content Wizard [Commercial]

13468924

Comments

  • RiverSoftArtRiverSoftArt Posts: 4,167
    veen said:
    veen said:
    veen said:

    I tryed a whole evening installing Renderosity products to my smart content pane without any luck, i only see a product icon. When i click on it i only see a square image with a yellow triangle. The log show only 1 item is installed. Any help would be appreciate it. I am pretty sure i configured everything correctly.

    For you information i am on a Dutch computer (remember the issue with the Text tattoo? it wont execute the script due to my language) just saying)

    You only see a product icon for Content Wizard or for an item when you try to Install Smart Content?  Can you post the log?

    My log:

    11:29:07 GMT+0100 (West-Europa (standaardtijd)): Clearing Working Directory...

     

    11:29:07 GMT+0100 (West-Europa (standaardtijd)): ...Success

    11:29:07 GMT+0100 (West-Europa (standaardtijd)): Extracting files from C:\DAZ Content Wizard Temp orginal zip\dForce Kitchen Lingerie.zip...

    11:29:08 GMT+0100 (West-Europa (standaardtijd)): ...Success

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): Analyzing Product...

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): Scanning "People" directory...

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): wearable File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Kitchen Lingerie All.duf

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Kitchen Lingerie All.duf.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Kitchen Lingerie All.tip.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): wearable File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Kitchen Lingerie Panty.duf

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Kitchen Lingerie Panty.duf.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Kitchen Lingerie Panty.tip.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): wearable File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Kitchen Lingerie Wristband.duf

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Kitchen Lingerie Wristband.duf.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Kitchen Lingerie Wristband.tip.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): wearable File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Kitchen Lingerie.duf

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Kitchen Lingerie.duf.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Kitchen Lingerie.tip.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Lingerie/Kitchen Lingerie.duf.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Lingerie/Kitchen Lingerie.tip.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): preset_material File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Lingerie/Lingerie Style 01.duf

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Lingerie/Lingerie Style 01.duf.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Lingerie/Lingerie Style 01.tip.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): preset_material File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Lingerie/Lingerie Style 02.duf

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Lingerie/Lingerie Style 02.duf.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Lingerie/Lingerie Style 02.tip.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): preset_material File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Lingerie/Lingerie Style 03.duf

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Lingerie/Lingerie Style 03.duf.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Lingerie/Lingerie Style 03.tip.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): preset_material File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Lingerie/Lingerie Style 04.duf

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Lingerie/Lingerie Style 04.duf.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Lingerie/Lingerie Style 04.tip.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): preset_material File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Panty/Panty Style 01.duf

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Panty/Panty Style 01.duf.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Panty/Panty Style 01.tip.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): preset_material File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Panty/Panty Style 02.duf

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Panty/Panty Style 02.duf.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Panty/Panty Style 02.tip.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): preset_material File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Panty/Panty Style 03.duf

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Panty/Panty Style 03.duf.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Panty/Panty Style 03.tip.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): preset_material File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Panty/Panty Style 04.duf

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Panty/Panty Style 04.duf.png

    11:29:13 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Panty/Panty Style 04.tip.png

    11:29:14 GMT+0100 (West-Europa (standaardtijd)): preset_material File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Wristband/Wristband Style 01.duf

    11:29:14 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Wristband/Wristband Style 01.duf.png

    11:29:14 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Wristband/Wristband Style 01.tip.png

    11:29:14 GMT+0100 (West-Europa (standaardtijd)): preset_material File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Wristband/Wristband Style 02.duf

    11:29:14 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Wristband/Wristband Style 02.duf.png

    11:29:14 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Wristband/Wristband Style 02.tip.png

    11:29:14 GMT+0100 (West-Europa (standaardtijd)): preset_material File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Wristband/Wristband Style 03.duf

    11:29:14 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Wristband/Wristband Style 03.duf.png

    11:29:14 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Wristband/Wristband Style 03.tip.png

    11:29:14 GMT+0100 (West-Europa (standaardtijd)): preset_material File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Wristband/Wristband Style 04.duf

    11:29:14 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Wristband/Wristband Style 04.duf.png

    11:29:14 GMT+0100 (West-Europa (standaardtijd)): .png File: C:/DAZ Content Wizard Temp/People/Genesis 8 Female/Clothing/OneSix/Kitchen Lingerie/Wristband/Wristband Style 04.tip.png

    11:29:14 GMT+0100 (West-Europa (standaardtijd)): Analysis Complete.

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): Installing Product to Daz Studio...

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): Verifying existence of Renderosity store: true

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): Verifying "d Force Kitchen Lingerie" product does not exist already

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): Found existing product in Daz Studio: d Force Kitchen Lingerie

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): Product: d Force Kitchen Lingerie

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): Description:

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): URL: 139798

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): Artists: OneSix

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): Store: LOCAL USER

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): Vendor: false

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): GUID: dde7ead2-93ea-48d7-a25d-fb6fb241f2bb

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): Date Installed: Fri Feb 28 2020 22:12:35 GMT+0100 (West-Europa (standaardtijd)) (Currently Installed: true)

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): Date Released: Fri Feb 28 2020 22:24:49 GMT+0100 (West-Europa (standaardtijd))

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): Copy: false, Delete: true, Insert: false, Modify: true, Rename: true

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): Number of Assets: 1

    11:29:50 GMT+0100 (West-Europa (standaardtijd)): Number of Child Containers: 0

    11:29:54 GMT+0100 (West-Europa (standaardtijd)): Building product metadata...

    11:29:54 GMT+0100 (West-Europa (standaardtijd)): Creating Product Icon from C:/Users/****/Desktop/Nieuwe map/kitchen lingerie.jpg...

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Creating support file...

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Importing Product into Daz Studio...

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Product Created: dde7ead2-93ea-48d7-a25d-fb6fb241f2bb

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Updating Assets Compatibility Bases...

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Product: d Force Kitchen Lingerie

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Description:

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): URL: 139798

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Artists: OneSix

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Store: LOCAL USER

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Vendor: false

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): GUID: dde7ead2-93ea-48d7-a25d-fb6fb241f2bb

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Date Installed: Fri Feb 28 2020 22:12:35 GMT+0100 (West-Europa (standaardtijd)) (Currently Installed: true)

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Date Released: Sat Feb 29 2020 11:29:55 GMT+0100 (West-Europa (standaardtijd))

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Copy: false, Delete: true, Insert: false, Modify: true, Rename: true

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Number of Assets: 1

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Number of Child Containers: 0

    11:29:55 GMT+0100 (West-Europa (standaardtijd)): Installation Completed Successfully

     

    log saying 11:29:55 GMT+0100 (West-Europa (standaardtijd)): Store: LOCAL USER while i have Renderosity selected

     

    Ok.  That looks good.  Can you save the configuration for this product and post that?  I want to see what you classified everything as.  

    i am not understand **Ok.  That looks good.  Can you save the configuration for this product and post that?  I want to see what you classified everything as.**  can you explain a bit more what you need?

    thanks

     

    I mean

    1. Start Content Wizard (CW)
    2. Now hopefully you haven't tried to install anything else and CW is still set up for the problem product.  Otherwise, you need to make sure everything is exactly set up for this product
    3. Click the "Save Configuration File" in Content Wizard and save that configuration to a text file.
    4. Copy and paste the contents of the text file to this forum thread as a post.

    As a general rule, use "Save Configuration File" for EVERY product you want to install.  This saves everything you have told CW about this product, and you can reload it at any point to update things (or help me debug it with you)

  • James_HJames_H Posts: 670
    James_H said:

    OK, I have installed some products and they appear in smart content.

    However I have a significant problem. One product was a Rendo Maddelirium character (MDD Theory) (G8). Now when I use Daz, Genesis 8 Female isn't linking to any items such as Wardrobe, so I can't Filter by Context to find anything. Genesis 8 Male is working as per usual. Genesis 3 female loads slowly, but is working with smart content. Genesis 8 Basic Female and characters appear in the smart content pane. However if I look in materials, I can see MDD Theory (+ one other which I've been meaning to uninstall as it appears with everything).

    Any suggestions? I'm guessing that the cock-up occurred with the smart content install for MDD Theory, but I don't know that. There are a range of faults reported in the log, but there have been quite a few of those before.

     

    Nothing comes immediately to mind.  I am guessing G8F WAS linking to items such as wardrobe before using this product?  Or you hadn't tried in awhile?  I wouldn't think that installing MDD Theory could mess it up.  Can you post your CW configuration for MDD theory?

    OK, I will try to find that. Just to confirm G8F was working fine yesterday, then I installed CW, and added some items. When I load G8F base and select it, I can see MDD Theory materials and nothing else in Materials.

  • RiverSoftArtRiverSoftArt Posts: 4,167
    edited February 29
    James_H said:
    James_H said:

    OK, I have installed some products and they appear in smart content.

    However I have a significant problem. One product was a Rendo Maddelirium character (MDD Theory) (G8). Now when I use Daz, Genesis 8 Female isn't linking to any items such as Wardrobe, so I can't Filter by Context to find anything. Genesis 8 Male is working as per usual. Genesis 3 female loads slowly, but is working with smart content. Genesis 8 Basic Female and characters appear in the smart content pane. However if I look in materials, I can see MDD Theory (+ one other which I've been meaning to uninstall as it appears with everything).

    Any suggestions? I'm guessing that the cock-up occurred with the smart content install for MDD Theory, but I don't know that. There are a range of faults reported in the log, but there have been quite a few of those before.

     

    Nothing comes immediately to mind.  I am guessing G8F WAS linking to items such as wardrobe before using this product?  Or you hadn't tried in awhile?  I wouldn't think that installing MDD Theory could mess it up.  Can you post your CW configuration for MDD theory?

    OK, I will try to find that. Just to confirm G8F was working fine yesterday, then I installed CW, and added some items. When I load G8F base and select it, I can see MDD Theory materials and nothing else in Materials.

    That is really strange.  CW neither changes the G8F compatibility base nor any other item's compatibilities, only for the product it is working on.  Unfortunately, I have nothing from Maddelirium to test with.

    Post edited by RiverSoftArt on
  • veenveen Posts: 52
    edited February 29

    i think i got it, first install the content. After that adding smart content to have it in the smart content pane. right?

    i confirm i got it working now, just creaed a "smart content" product from 4 Renderosity zip files.

    This is an awesome product!!

    thank you

    Post edited by veen on
  • RiverSoftArtRiverSoftArt Posts: 4,167
    edited February 29
    veen said:

    i think i got it, first install the content. After that adding smart content to have it in the smart content pane. right?

    Actually, the order for things is to:

    1. Add zip files
    2. Set the Product Name, Vendor Name, Store (using the drop down), ID, and Product Icon
    3. [Anything else]

    I usually do things in this order:

    1. Add zip files
    2. Set the Product Name, Vendor Name, Store (using the drop down), and ID
    3. Analyze...
    4. Verify and edit analysis
    5. Save Configuration File
    6. Install Content
    7. Install Smart Content
    8. Save Configuration File AGAIN (the smart content install changes some things based on talking with the DB)
    9. Save and close CW
    10. Verify the product is working in DS... if it is:
    11. Restart Content Wizard
    12. Clear the product and do the next product
    Post edited by RiverSoftArt on
  • Thank you @DoctorJellybean!  I look forward to hearing what you think.

    So far (just a very quick look), even after installing the Smart Content, the Export Zip button doesn't become active. If I click Refresh Analysis, it becomes active.

    I would have liked an Export option for the Runtime\Support files so that one doesn't have to install it first.

    I forget why right now, but I needed to have the files installed in order to create the runtime support files.

    So when a zip is added, and the analyze process is started, the zip gets installed? Or does it gets extracted to the working folder?

    For analysis, the product is unzipped to the working folder only.  Only when you click Install Content do any files get copied over.

    Ok, so maybe the scanning of a temp folder isn't neccessary. If it gets unzipped to the working folder and analyzed, then an Export option instead if Install should be good enough.

    Maybe, instead of loading a zip, it can analyze a temp folder and create smart content for the files in the temp folder.

    I could possibly do this, but then nothing better be put in that folder that shouldn't be there.  At least with the zip files, I can verify things.

    That would be up to the user to make sure the folder is empty.

    Understood.

    You could add a disclaimer that anything exported is not covered by your support :)

  • Ok, I will look at this tomorrow.  It is almost midnight my time.  I am sorry for the problem.

    Only midnight? Slacker laugh

  • RiverSoftArtRiverSoftArt Posts: 4,167
    Thank you @DoctorJellybean!  I look forward to hearing what you think.

    So far (just a very quick look), even after installing the Smart Content, the Export Zip button doesn't become active. If I click Refresh Analysis, it becomes active.

    I would have liked an Export option for the Runtime\Support files so that one doesn't have to install it first.

    I forget why right now, but I needed to have the files installed in order to create the runtime support files.

    So when a zip is added, and the analyze process is started, the zip gets installed? Or does it gets extracted to the working folder?

    For analysis, the product is unzipped to the working folder only.  Only when you click Install Content do any files get copied over.

    Ok, so maybe the scanning of a temp folder isn't neccessary. If it gets unzipped to the working folder and analyzed, then an Export option instead if Install should be good enough.

    Ok, I will look into it.

    Maybe, instead of loading a zip, it can analyze a temp folder and create smart content for the files in the temp folder.

    I could possibly do this, but then nothing better be put in that folder that shouldn't be there.  At least with the zip files, I can verify things.

    That would be up to the user to make sure the folder is empty.

    Understood.

    You could add a disclaimer that anything exported is not covered by your support :)

    That never seems to work cheeky

  • RiverSoftArtRiverSoftArt Posts: 4,167
    Ok, I will look at this tomorrow.  It is almost midnight my time.  I am sorry for the problem.

    Only midnight? Slacker laugh

    I am living the good life! laugh

  • James_HJames_H Posts: 670

    And all is well: uninstalling and reinstalling Genesis 8 Female Essentials has solved the problem for Genesis 8 Female and other figures linked to her.

  • RiverSoftArtRiverSoftArt Posts: 4,167
    James_H said:

    And all is well: uninstalling and reinstalling Genesis 8 Female Essentials has solved the problem for Genesis 8 Female and other figures linked to her.

    Oh, awesome!  I am glad to hear that.  Does MDD Theory still work?

  • James_HJames_H Posts: 670

    I have had failures with:

    Palamo's The Machine (Rendo)

    Nirvy's dForce Peppery sweater'n' dress (Rendo)

  • RiverSoftArtRiverSoftArt Posts: 4,167
    James_H said:

    I have had failures with:

    Palamo's The Machine (Rendo)

    Nirvy's dForce Peppery sweater'n' dress (Rendo)

    Hmmm.  Unfortunately, I don't have those.  There is one, Barn One, that @Surreal is having trouble with (and that I do have).  If I can figure that one out, hopefully it will help you.

  • SimonJMSimonJM Posts: 5,743

    Just run a simple tes of Smart Content/metadata for a 'rosity prodiuct. Works nicely - even if I did foget to make sure a product icon was selected ...!

    What seems missing, for me, is the ability to select (as opposed to typing by hand) individual content libraries wholesale for an actual install (I tend to direct installs to different libraries for each vendor).

  • AnEye4ArtAnEye4Art Posts: 162
    edited February 29
    SimonJM said:

    Just run a simple tes of Smart Content/metadata for a 'rosity prodiuct. Works nicely - even if I did foget to make sure a product icon was selected ...!

    What seems missing, for me, is the ability to select (as opposed to typing by hand) individual content libraries wholesale for an actual install (I tend to direct installs to different libraries for each vendor).

    So can you select the product from within smart content? I am not having any luck getting Renderosity product Berry, or MDD Monet rar file to install into smart content. Everything works well up to the point when I hit "install smart content" and I get "there were errors during installation".

    Post edited by AnEye4Art on
  • RiverSoftArtRiverSoftArt Posts: 4,167
    SimonJM said:

    Just run a simple tes of Smart Content/metadata for a 'rosity prodiuct. Works nicely - even if I did foget to make sure a product icon was selected ...!

    What seems missing, for me, is the ability to select (as opposed to typing by hand) individual content libraries wholesale for an actual install (I tend to direct installs to different libraries for each vendor).

    I am not sure I understand what you want to do?

  • RiverSoftArtRiverSoftArt Posts: 4,167
    SimonJM said:

    Just run a simple tes of Smart Content/metadata for a 'rosity prodiuct. Works nicely - even if I did foget to make sure a product icon was selected ...!

    What seems missing, for me, is the ability to select (as opposed to typing by hand) individual content libraries wholesale for an actual install (I tend to direct installs to different libraries for each vendor).

    So can you select the product from within smart content? I am not having any luck getting Renderosity product Berry, or MDD Monet rar file to install into smart content. Everything works well up to the point when I hit "install smart content" and I get "there were errors during installation".

    I am investigating an issue with Barn One from Dreamlands.  If I can figure that one out, hopefully that will help with your issue.

  • SimonJMSimonJM Posts: 5,743
    SimonJM said:

    Just run a simple tes of Smart Content/metadata for a 'rosity prodiuct. Works nicely - even if I did foget to make sure a product icon was selected ...!

    What seems missing, for me, is the ability to select (as opposed to typing by hand) individual content libraries wholesale for an actual install (I tend to direct installs to different libraries for each vendor).

    I am not sure I understand what you want to do?

    From what I can see there is but one place tospecify an install location, and that is a text field which comes pre-populated with a folder (not sure where picked up from) that is teh default install location for DAZ content.  I I know there is the while 'redirect' thing, but I am not sure I want to use that.  What I'd want is to be able to pick a product's zip file(s) and pont the entirety of THIS install to a different base content library, preferably without having to manually type in the hole directory name. I have 6 DS content libraries defined (as well as 6 poser runtimes, which of course I do not need for this!).  If I get a product from 'rosity I instal it into my 'rosity content library'. If I get a freebie I put it into my 'other' content library, DIM will put my DAZ stuff into my Daz content libray, and so on.

  • SimonJMSimonJM Posts: 5,743
    SimonJM said:

    Just run a simple tes of Smart Content/metadata for a 'rosity prodiuct. Works nicely - even if I did foget to make sure a product icon was selected ...!

    What seems missing, for me, is the ability to select (as opposed to typing by hand) individual content libraries wholesale for an actual install (I tend to direct installs to different libraries for each vendor).

    So can you select the product from within smart content? I am not having any luck getting Renderosity product Berry, or MDD Monet rar file to install into smart content. Everything works well up to the point when I hit "install smart content" and I get "there were errors during installation".

    You'll ne un un-rar and recompres as a zip file for Content Wizard to find/cope with the product.

    What I did was find the zip files for a [prduct I had already installed and just got Content Wizard to generate metadata/Smart Content for me.

  • RiverSoftArtRiverSoftArt Posts: 4,167
    SimonJM said:
    SimonJM said:

    Just run a simple tes of Smart Content/metadata for a 'rosity prodiuct. Works nicely - even if I did foget to make sure a product icon was selected ...!

    What seems missing, for me, is the ability to select (as opposed to typing by hand) individual content libraries wholesale for an actual install (I tend to direct installs to different libraries for each vendor).

    I am not sure I understand what you want to do?

    From what I can see there is but one place tospecify an install location, and that is a text field which comes pre-populated with a folder (not sure where picked up from) that is teh default install location for DAZ content.  I I know there is the while 'redirect' thing, but I am not sure I want to use that.  What I'd want is to be able to pick a product's zip file(s) and pont the entirety of THIS install to a different base content library, preferably without having to manually type in the hole directory name. I have 6 DS content libraries defined (as well as 6 poser runtimes, which of course I do not need for this!).  If I get a product from 'rosity I instal it into my 'rosity content library'. If I get a freebie I put it into my 'other' content library, DIM will put my DAZ stuff into my Daz content libray, and so on.

    Ah.  I think I understand now.  While you cannot set it per product, you can easily click that Daz Content button and select a new location.

  • SimonJMSimonJM Posts: 5,743
    SimonJM said:
    SimonJM said:

    Just run a simple tes of Smart Content/metadata for a 'rosity prodiuct. Works nicely - even if I did foget to make sure a product icon was selected ...!

    What seems missing, for me, is the ability to select (as opposed to typing by hand) individual content libraries wholesale for an actual install (I tend to direct installs to different libraries for each vendor).

    I am not sure I understand what you want to do?

    From what I can see there is but one place tospecify an install location, and that is a text field which comes pre-populated with a folder (not sure where picked up from) that is teh default install location for DAZ content.  I I know there is the while 'redirect' thing, but I am not sure I want to use that.  What I'd want is to be able to pick a product's zip file(s) and pont the entirety of THIS install to a different base content library, preferably without having to manually type in the hole directory name. I have 6 DS content libraries defined (as well as 6 poser runtimes, which of course I do not need for this!).  If I get a product from 'rosity I instal it into my 'rosity content library'. If I get a freebie I put it into my 'other' content library, DIM will put my DAZ stuff into my Daz content libray, and so on.

    Ah.  I think I understand now.  While you cannot set it per product, you can easily click that Daz Content button and select a new location.

    True, and sorry, I am not sure why Ithought it was a manual entry ... I think I was thinking of something else and it just stuck!  Still be nice to have a drop down list of the defined libraries (and a Briwse ... option)

    I'll continue dabbling - even for auto-create metadat for currrently installed products makes this a worthwhile purchase, thank you!

    Also, why do I have to uncheck 'Filter by Content' to find it - this has got to be one of THE most content agnostic products out there! cheeky

  • RiverSoftArtRiverSoftArt Posts: 4,167
    SimonJM said:
    SimonJM said:
    SimonJM said:

    Just run a simple tes of Smart Content/metadata for a 'rosity prodiuct. Works nicely - even if I did foget to make sure a product icon was selected ...!

    What seems missing, for me, is the ability to select (as opposed to typing by hand) individual content libraries wholesale for an actual install (I tend to direct installs to different libraries for each vendor).

    I am not sure I understand what you want to do?

    From what I can see there is but one place tospecify an install location, and that is a text field which comes pre-populated with a folder (not sure where picked up from) that is teh default install location for DAZ content.  I I know there is the while 'redirect' thing, but I am not sure I want to use that.  What I'd want is to be able to pick a product's zip file(s) and pont the entirety of THIS install to a different base content library, preferably without having to manually type in the hole directory name. I have 6 DS content libraries defined (as well as 6 poser runtimes, which of course I do not need for this!).  If I get a product from 'rosity I instal it into my 'rosity content library'. If I get a freebie I put it into my 'other' content library, DIM will put my DAZ stuff into my Daz content libray, and so on.

    Ah.  I think I understand now.  While you cannot set it per product, you can easily click that Daz Content button and select a new location.

    True, and sorry, I am not sure why Ithought it was a manual entry ... I think I was thinking of something else and it just stuck!  Still be nice to have a drop down list of the defined libraries (and a Briwse ... option)

    I'll continue dabbling - even for auto-create metadat for currrently installed products makes this a worthwhile purchase, thank you!

    Also, why do I have to uncheck 'Filter by Content' to find it - this has got to be one of THE most content agnostic products out there! cheeky

    The metadata for CW is defined by Daz smiley  I will have to think about what to do about switching.  I am sure there is something; just what is the right solution is the question.

  • AnEye4ArtAnEye4Art Posts: 162

    Some good news!! I was able to successfully install Berry for G8 Female from renderosity by unzipping the rar and redoing it as a zip. Then I saw "uncheck 'Filter by Content' to find it" and I was able to see Berry in Smart content. However, the rezipping did not work for the other Renderosity models. I still got the install error. But some progress is happening.

  • SimonJMSimonJM Posts: 5,743

    Two steps forward, one back for me ... What I am doing is just 'Install Smart Data' for existing installed products. So, witht aht in mind:

    If I forget to fill in Vendor name and Store name (any chance of more store names?) the install of Smart Data wil fail saying that Daz Studio returned 'product X' when 'product trying to install smart data for' product was requested to be created, and that 'Product X' seems to always be the same one (from 'another store'  Remembered I had entered those data when the 1st product I did worked, so went back and tried abnother, and it worked wher it had not before - joy, rapture! Then did another and this time it is complaining about a that 1st product I did smart data install for:

    19:31:03 GMT+0000 (GMT Standard Time): Analysis Complete.

    19:31:28 GMT+0000 (GMT Standard Time): Installing Product to Daz Studio...

    19:31:28 GMT+0000 (GMT Standard Time): Verifying existence of Renderosity store: true

    19:31:28 GMT+0000 (GMT Standard Time): Verifying "Bennie Hair G3 G8daz 1 227384" product does not exist already

    19:31:28 GMT+0000 (GMT Standard Time): Creating "Bennie Hair G3 G8daz 1 227384" product in Daz Studio...

    19:31:28 GMT+0000 (GMT Standard Time): Daz Studio returned "Alion Suit G8 F 01 215248" product when "Bennie Hair G3 G8daz 1 227384" product was requested to be created

    19:31:28 GMT+0000 (GMT Standard Time): Product: Alion Suit G8 F 01 215248

    19:31:28 GMT+0000 (GMT Standard Time): Description:

    19:31:28 GMT+0000 (GMT Standard Time): URL: @

    19:31:28 GMT+0000 (GMT Standard Time): Artists:

    19:31:28 GMT+0000 (GMT Standard Time): Store: Renderosity

    19:31:28 GMT+0000 (GMT Standard Time): Vendor: false

    19:31:28 GMT+0000 (GMT Standard Time): GUID: 23323611-a8f9-4f14-800b-78c44c0b3150

    19:31:28 GMT+0000 (GMT Standard Time): Date Installed: Sat Feb 29 2020 15:40:39 GMT+0000 (GMT Standard Time) (Currently Installed: true)

    19:31:28 GMT+0000 (GMT Standard Time): Date Released: Sat Feb 29 2020 18:50:53 GMT+0000 (GMT Standard Time)

    19:31:28 GMT+0000 (GMT Standard Time): Copy: false, Delete: true, Insert: false, Modify: true, Rename: true

    19:31:28 GMT+0000 (GMT Standard Time): Number of Assets: 65

    19:31:28 GMT+0000 (GMT Standard Time): Number of Child Containers: 0

    19:31:28 GMT+0000 (GMT Standard Time): There were errors during installation.

    I know I have a LOT of stuff, but ... (as an ex-programmer) I have to wonder, what search terms are being used, where? 

  • GalameshGalamesh Posts: 6
    edited March 1

    Amazing Product! I was looking for something like this from a long time ago. Really easy to use and very poweful. Thanks River.

    Post edited by Galamesh on
  • stacywallacestacywallace Posts: 11
    edited February 29

     

    @stacywallace, it looks like your error is slightly earlier though.  Have you set the artist/vendor?  Could you save your configuration for this product and post it here?

    @riversoftart it was attached to my original post : https://www.daz3d.com/forums/uploads/FileUpload/ce/f81fd6bbf219ee272461219cee2d80.txt

    And yes to setting both the artist and vendor.

    Post edited by stacywallace on
  • DaventakiDaventaki Posts: 841

    So can you select the product from within smart content? I am not having any luck getting Renderosity product Berry, or MDD Monet rar file to install into smart content. Everything works well up to the point when I hit "install smart content" and I get "there were errors during installation".

    Ive tried installing Peppery Sweater and Angelically Naughty by nirvy and a pose from Most Digital Creations, the installs do fine and they show in Content Library but I get an error every time I try to install the Smart Content. 

    txt
    txt
    PepperySweater.txt
    71K
  • I was having problems as well installing the smart content. Seems like if I put something in product ID it will work. If it is empty it dosen't.

  • I was having problems as well installing the smart content. Seems like if I put something in product ID it will work. If it is empty it dosen't.

    If I'm not mistaken, it needs a product ID.

  • SimonJMSimonJM Posts: 5,743

    If it's a 3ed party (i.e., non-=DAZ) what is teh correct 'thing' to use for Product ID. especially if, as it seems, it is a pretty much required field.

Sign In or Register to comment.