Loading...
> >

GENERAL FREEBIE REQUESTS Part 2

1…1112141617…100

Comments

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    Chronopunk said:
    There are a couple over on Rendo, but as I actually know and hang out with a few ladies who are very in to the whole EGL scene, I can attest that they are not (in fact) actually EGL-based. They're similar, but not "it" really.

    ??

    There's really an 'it' for them to be?

    What are differences?

    With all the ways to change textures/morph the item, does it have to match 100%, especially for a free item?

  • ChronopunkChronopunk Posts: 292
    edited December 1969

    mjc1016 said:

    ??

    There's really an 'it' for them to be?

    What are differences?

    With all the ways to change textures/morph the item, does it have to match 100%, especially for a free item?

    I admit, I may have come off a bit particular for a freebie request. Wasn't intending to cause a frooferah, but what I'm getting at is that something like this dress is actually too "cupcake" for the style.

    For comparison, the usual EGL style has full coverage sleeves, higher necklines, more refined hemlines, etc. Rather like these.

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    To me, it looks mostly to be difference in textures/material than really one of 'style'.

    Most of the stuff coming up on the first Google image page seems to be that EGL stuff is 'dark'...black, shades of grey, deep reds, etc. All that can be done with texturing...which would be a bit easier to find freebies for. Cupcake to me implies light/bright colors..

    There's some V4 stuff would probably work...but not all that much for Genesis.

    As to the cheongsam/qiapo there is one for the MFD...and since it looks to be textures/transparency maps, it should work on the Genesis version of the MFD...

    http://www.sharecg.com/v/19200/browse/11/Poser/Qipao-Pow-for-MFD

  • ChronopunkChronopunk Posts: 292
    edited December 1969

    mjc1016 said:
    To me, it looks mostly to be difference in textures/material than really one of 'style'.

    Most of the stuff coming up on the first Google image page seems to be that EGL stuff is 'dark'...black, shades of grey, deep reds, etc. All that can be done with texturing...which would be a bit easier to find freebies for. Cupcake to me implies light/bright colors..

    There's some V4 stuff would probably work...but not all that much for Genesis.

    As to the cheongsam/qiapo there is one for the MFD...and since it looks to be textures/transparency maps, it should work on the Genesis version of the MFD...

    http://www.sharecg.com/v/19200/browse/11/Poser/Qipao-Pow-for-MFD

    Right on, thank you.

  • robkelkrobkelk Posts: 3,259
    edited December 1969

    Chronopunk said:
    mjc1016 said:
    To me, it looks mostly to be difference in textures/material than really one of 'style'.

    Most of the stuff coming up on the first Google image page seems to be that EGL stuff is 'dark'...black, shades of grey, deep reds, etc. All that can be done with texturing...which would be a bit easier to find freebies for. Cupcake to me implies light/bright colors..

    There's some V4 stuff would probably work...but not all that much for Genesis.

    As to the cheongsam/qiapo there is one for the MFD...and since it looks to be textures/transparency maps, it should work on the Genesis version of the MFD...

    http://www.sharecg.com/v/19200/browse/11/Poser/Qipao-Pow-for-MFD

    Right on, thank you.
    Ah - since you have the MFD, here are a few more for you:
    http://sharecg.com/v/15532
    http://sharecg.com/v/15533
    http://sharecg.com/v/15534

  • ChronopunkChronopunk Posts: 292
    edited December 1969

    I do have the Genesis MFD. About the only thing these don't do for what I need is the leg slit. I may or may not be trying to recreate a scene from the opening of Temple Of Doom...

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    You know, I got the Genesis MFD when it was on sale on time for next to nothing...and I hardly ever use it...but before I got it, there was a ton of stuff I wanted it for.

    Plus, most of the V4 MFD textures work on it...and there's like a bazillion free ones for the MFD.

  • AbeternalAbeternal Posts: 18
    edited December 1969

    Ok, I'm not sure where to direct this request...
    I am willing to pay for quality work, and any serious designer may contact me regarding this. The item I need is for book illustration purposes and is a rather urgent request.

    I have a primitive clothing prop already created to give you an idea. I lack the skill and time to make this into what I require. Here is a short list of needed features:
    1. Genesis
    2. UV maps for placing custom insignia on the chest
    3. Morphable lower section for sitting/action poses
    4. Ties/straps/fasteners under arms
    5. Proper bumps for a slightly thicker cloth appearance

    I can send you the partial item if needed. Any help on this, even directions to a tutorial, would be appreciated. If there is a similar object in existence somewhere, please let me know.

    Surcote_back.jpg
    1604 x 1230 - 48K
    Surcote_front.jpg
    1604 x 1230 - 50K
  • archangel1802archangel1802 Posts: 0
    edited December 1969

    I am in need of a good office chair. the type you might find in a bank or school office.
    i have searched for days with nothing interesting.
    free is always good, but i might pay if the price is right and the piece is good.
    i would also LOVE to find a walk through of how to build such an item, or someone to teach me.
    thanks in advance, and i love the stuff i have found here so far

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    archangel432 said:
    I am in need of a good office chair. the type you might find in a bank or school office.
    i have searched for days with nothing interesting.
    free is always good, but i might pay if the price is right and the piece is good.
    i would also LOVE to find a walk through of how to build such an item, or someone to teach me.
    thanks in advance, and i love the stuff i have found here so far

    I've used these two before...they are both pretty 'normal' modern office chairs...

    http://www.renderosity.com/mod/freestuff/details.php?item_id=22613
    http://www.renderosity.com/mod/freestuff/details.php?item_id=55342 (this on is a bit 'fancier'...full back and has arms)

    There's an 'executive' office chair and some other office furniture here...

    http://www.renderosity.com/mod/freestuff/index.php?user_id=17906

    Elele has a nice executive chair and desk, too...

    http://www.renderosity.com/mod/freestuff/index.php?user_id=679722

  • archangel1802archangel1802 Posts: 0
    edited December 1969

    thank you very much sir, unfortunately these are all in .pp2, is there anyway to use poser files in daz 4.5?

  • Tramp GraphicsTramp Graphics Posts: 2,407
    edited December 1969

    archangel432 said:
    thank you very much sir, unfortunately these are all in .pp2, is there anyway to use poser files in daz 4.5?
    You can use Poser prop files in Daz as is. They don't need converting to DAZ format.
  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    They won't be in the Smart Content, but rather Content Library under Poser Formats in the Props folder.

  • archangel1802archangel1802 Posts: 0
    edited December 1969

    excellent, one final question then (at least for now).
    is there a good tutorial out there on how to create these objects?
    i have played around with the primatives and done pretty well i think, but i can not figure out how to do certain shapes or bendable morphs. (for instance the curved bars on the bottom of an office chair.)

  • patience55patience55 Posts: 7,006
    edited December 1969

    abepienaar said:
    Ok, I'm not sure where to direct this request...
    I am willing to pay for quality work, and any serious designer may contact me regarding this. The item I need is for book illustration purposes and is a rather urgent request.

    I have a primitive clothing prop already created to give you an idea. I lack the skill and time to make this into what I require. Here is a short list of needed features:
    1. Genesis
    2. UV maps for placing custom insignia on the chest
    3. Morphable lower section for sitting/action poses
    4. Ties/straps/fasteners under arms
    5. Proper bumps for a slightly thicker cloth appearance

    I can send you the partial item if needed. Any help on this, even directions to a tutorial, would be appreciated. If there is a similar object in existence somewhere, please let me know.

    Well I did have a rather popular thread going over here: http://www.daz3d.com/forums/discussion/2174/

    It's buried in Nuts 'n Bolts which is found under General which is seen [up top] as the link before "Commons" when one is in the Commons.
    When the forum was started, this is where they suggested one put tutorials.

    A few of the basic steps:
    Model and uvmap the clothing item [one piece geometry] so that upon import into D/S it "lands" exactly where you want it on Genesis.
    Then select the Transfer utility to make the clothing [unless they've changed that, I'm not using the most recent edition]
    Fix up the textures as you want them and "save" the clothing item ... suggested path would be:
    My Library > People > Genesis > clothing > your handle > name of clothing

    Any required morphs would be made after the clothing is made. I highly recommend Hexagon for morphing the triax stuff.

  • archangel1802archangel1802 Posts: 0
    edited December 1969

    so the basic point is that you have to have an external program to create clothing and pose-able figures. there is no way to do this within the daz program itself??

  • Tramp GraphicsTramp Graphics Posts: 2,407
    edited December 1969

    archangel432 said:
    so the basic point is that you have to have an external program to create clothing and pose-able figures. there is no way to do this within the daz program itself??
    Clothes and such? Nope. You need modelling program like Hexagon or Blender to make things like clothes and other complex models. DS4 does have Primitives to make basic shapes, but nothing too complex. It's not a modelling program.
  • BeaBea Posts: 745
    edited December 1969

    Does anyone know is there any news on when a new version of Inject PMD's will be available.?

  • robkelkrobkelk Posts: 3,259
    edited February 2014

    A friend of mine wants me to do a Roman-Legion render - is there an Aquila prop out there anywhere for the legion to carry?

    (Before anyone asks: No, I don't have the DAZ Eagle, so I can't just re-texture that.)

    Post edited by robkelk on
  • patience55patience55 Posts: 7,006
    edited February 2014

    robkelk said:
    A friend of mine wants me to do a Roman-Legion render - is there an Aquila prop out there anywhere for the legion to carry?

    (Before anyone asks: No, I don't have the DAZ Eagle, so I can't just re-texture that.)

    :-( Forum software refuses to make that page a workable link so ...

    yes folks there is a page showing the Aquila ....

    And the gold one is a large public domain image :-)

    en.wikipedia.org/wiki/Aquila_(Roman)

    larger_image_available.JPG
    450 x 599 - 119K
    Post edited by patience55 on
  • archangel1802archangel1802 Posts: 0
    edited December 1969

    does anyone know if the easypose tube from Ajax at renderosity can be used in daz studio, and if so how?

    http://www.renderosity.com/mod/freestuff/details.php?item_id=6590

    also, is there a different forum to ask all these random questions, i feel like im asking too much that last few days, but im REALLY starting to get into this.

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    Short answer...yes.

    The pose dials will be under the Parameters...

  • KeryaKerya Posts: 10,943
    edited December 1969

    robkelk said:
    A friend of mine wants me to do a Roman-Legion render - is there an Aquila prop out there anywhere for the legion to carry?

    (Before anyone asks: No, I don't have the DAZ Eagle, so I can't just re-texture that.)

    Does it have to look like that?
    http://www.3dcadbrowser.com/download.aspx?3dmodel=51534

  • robkelkrobkelk Posts: 3,259
    edited December 1969

    Kerya said:
    robkelk said:
    A friend of mine wants me to do a Roman-Legion render - is there an Aquila prop out there anywhere for the legion to carry?

    (Before anyone asks: No, I don't have the DAZ Eagle, so I can't just re-texture that.)

    Does it have to look like that?
    http://www.3dcadbrowser.com/download.aspx?3dmodel=51534
    Thanks! Now to register at that site...

  • moxleyjamesp_6d7b3281c1moxleyjamesp_6d7b3281c1 Posts: 9
    edited December 1969

    For the person looking for rockets I wanted to let them know he could go right to nasa
    http://www.nasa.gov/multimedia/3d_resources/models.html here

  • AbeternalAbeternal Posts: 18
    edited December 1969

    Thanks for the advice... I managed to make a workable model with Marvelous Designer Trial and the amazing transfer utility. Just thought I'd let you know :)

    It's just conformed and a little problematic in posing, but works for me!

    RG.png
    1483 x 1233 - 305K
  • zawarkalzawarkal Posts: 1,018
    edited December 1969

    Funny. I've never looked at this thread. I wasn't even subscribed to it. Yet, I got an email notification for it???

  • patience55patience55 Posts: 7,006
    edited December 1969

    abepienaar said:
    Thanks for the advice... I managed to make a workable model with Marvelous Designer Trial and the amazing transfer utility. Just thought I'd let you know :)

    It's just conformed and a little problematic in posing, but works for me!

    Looks good.

  • patience55patience55 Posts: 7,006
    edited December 1969

    Zawarkal said:
    Funny. I've never looked at this thread. I wasn't even subscribed to it. Yet, I got an email notification for it???

    Funny things happening from several sites ... I got a cloud subscription members' update notice to a website I'm not subscribing for cloud service on!

  • Tramp GraphicsTramp Graphics Posts: 2,407
    edited December 1969

    abepienaar said:
    Thanks for the advice... I managed to make a workable model with Marvelous Designer Trial and the amazing transfer utility. Just thought I'd let you know :)

    It's just conformed and a little problematic in posing, but works for me!

    Definitely looks good; much better than my first attempt.
This discussion has been closed.