Loading...
> >

Superheroes Rebooted - Ready to Rrrrrender?

1…6667697172…100

Comments

  • JoeQuickJoeQuick Posts: 1,729

     With zbrush, you can get decent uvs just by using it's unwrapping feature and making sure you've got smart polygroups.  Like with clothes, group it like you cut it if it were real fabric.  With hard surface stuff, you might be able to get by by just grouping it so that each different material is its own group.

    RKane_1 said:
    JoeQuick said:

    It's looking good. I'm enjoying the new series quite a bit,  one of the best things I've read in a long time. I'd thought about doing Scott and Barda for a while (and because I love the bwahaha era league). 

    One of my first freebies was a barda helmet (I just mashed a bunch of primitives together and shaped them in zbrush).   But yeah, time.  There just isn't time anymore.

    If you want help texturing, and you don't have substance painter, I can bang something out once you've got the modeling and uv mapping done.

    RKane_1 said:

     

    Well, since there are no modellers out there wanting to invest time (I understand as I barely have any myself) I have decided to give it a shot. Here is Barda So far in ZBrush.... this could take a WHILE.

     

    Wow. I am truly honored, Joe. :)  I will be honest and let know I have never UV mapped anything before. I was just going to have it done with shaders but like HELL am I going to turn down and opportunity to collaborate with you! :) I will LEARN how to UV map it. I still am figuring out crease placement on the helmet  and then will tackle her chestplate and the body suit.

    My favorite scene of all time? "One punch! ONE PUNCH!!! BWAAHAHAHAHAHAHAHAHAHA!!!" :)

    Thanks again and I am MORE than overjoyed to see this through with ya! :)

     

  • RawArtRawArt Posts: 6,063
    edited September 2017

    A new Harley pic from me

    HarleyPortrait.jpg
    1000 x 1300 - 479K
    Post edited by RawArt on
  • tkdroberttkdrobert Posts: 3,606
    JoeQuick said:

     With zbrush, you can get decent uvs just by using it's unwrapping feature and making sure you've got smart polygroups.  Like with clothes, group it like you cut it if it were real fabric.  With hard surface stuff, you might be able to get by by just grouping it so that each different material is its own group.

    RKane_1 said:
    JoeQuick said:

    It's looking good. I'm enjoying the new series quite a bit,  one of the best things I've read in a long time. I'd thought about doing Scott and Barda for a while (and because I love the bwahaha era league). 

    One of my first freebies was a barda helmet (I just mashed a bunch of primitives together and shaped them in zbrush).   But yeah, time.  There just isn't time anymore.

    If you want help texturing, and you don't have substance painter, I can bang something out once you've got the modeling and uv mapping done.

    RKane_1 said:

     

    Well, since there are no modellers out there wanting to invest time (I understand as I barely have any myself) I have decided to give it a shot. Here is Barda So far in ZBrush.... this could take a WHILE.

     

    Wow. I am truly honored, Joe. :)  I will be honest and let know I have never UV mapped anything before. I was just going to have it done with shaders but like HELL am I going to turn down and opportunity to collaborate with you! :) I will LEARN how to UV map it. I still am figuring out crease placement on the helmet  and then will tackle her chestplate and the body suit.

    My favorite scene of all time? "One punch! ONE PUNCH!!! BWAAHAHAHAHAHAHAHAHAHA!!!" :)

    Thanks again and I am MORE than overjoyed to see this through with ya! :)

     

    Joe, how long is your sale?  I want buy one of your items, but I'm waiting for my $5 store credit I have several of your items on my wish list).  I've spend too much money this month already. :-(

  • tkdroberttkdrobert Posts: 3,606
    RawArt said:

    A new Harley pic from me

    Very cool, you just need the make up.

  • RawArtRawArt Posts: 6,063
    tkdrobert said:
    RawArt said:

    A new Harley pic from me

     

    Very cool, you just need the make up.

    She has the makeup

  • tkdroberttkdrobert Posts: 3,606

     

    RawArt said:
    tkdrobert said:
    RawArt said:

    A new Harley pic from me

     

    Very cool, you just need the make up.

    She has the makeup

    I meant clown makeup.

  • RawArtRawArt Posts: 6,063
    tkdrobert said:

     

    RawArt said:
    tkdrobert said:
    RawArt said:

    A new Harley pic from me

     

    Very cool, you just need the make up.

    She has the makeup

    I meant clown makeup.

    Not sure what you are looking for, but it is there....there are just strong shadows

  • RedfernRedfern Posts: 1,647

    I think he means the "pancake", thick, white makeup with goth-black lispstick which is usually associated with her initial design by Bruce Timm.

    Sincerely,

    Bill

  • tkdroberttkdrobert Posts: 3,606
    RawArt said:
    tkdrobert said:

     

    RawArt said:
    tkdrobert said:
    RawArt said:

    A new Harley pic from me

     

    Very cool, you just need the make up.

    She has the makeup

    I meant clown makeup.

    Not sure what you are looking for, but it is there....there are just strong shadows

    Might be my computer screen, it's very old.  I'll look at it again when I'm on a better system.  Nothing wrong with it either way.

  • tkdroberttkdrobert Posts: 3,606
    Redfern said:

    I think he means the "pancake", thick, white makeup with goth-black lispstick which is usually associated with her initial design by Bruce Timm.

    Sincerely,

    Bill

    Like:

    Image result for harley quinn

  • RawArtRawArt Posts: 6,063
    edited September 2017

    meh...to each their own

    Post edited by RawArt on
  • tkdroberttkdrobert Posts: 3,606
    RawArt said:

    meh...to each their own

    lol.  It's cool bro, it's cool.  It's a great render.

  • RawArtRawArt Posts: 6,063

    thnx

  • BrianP21361BrianP21361 Posts: 815
    edited September 2017
    RAMWolff said:

    Be really cool to see the original Defenders line up from back in the 70's.  Not sure if Nighthawk could be done. 

    A couple of pages back i posted my WIP of the original Defenders. It inspired me to keep working on them. Here's Namor. Nighthawk is next. 

    Here's how I made it:

    G2M

    Superbelt

    AllBack Hair

    Shell - Animated Heaven - Designs of eternity

    Feathered Wings for All

    Custom Head Morph

    Custom Face Texture

    Kitbashers - Bracers v01

    Briefs - Genesis 2 Starter Essentials

    Namor Final.png
    1000 x 1000 - 216K
    Post edited by BrianP21361 on
  • ServantServant Posts: 765
    edited September 2017

    Wolverine. Planned to do a piece several months back during the Logan hype, but RL, you know. Managed to finish it after hearing about his co-creator, Len Wein passed away. 

    Figure is Genesis 1 (with various Evolution and Zev0 morphs). Kitbashed the Mach 1.5 suit from ShareCG, Journeyman Scout outfit (from Genesis Starter essentials), Mutant Claws for Genesis (also at ShareCG). Rendered in DS. Postwork in PS and Clip Studio Paint.

    Post edited by Servant on
  • Perilous7Perilous7 Posts: 40

    Can any kind soul help me? Im wanting to do a render of the princess from Battle of the Planets and i wanted to find some boots for her,virtually every thing i have seen that comes close has something wrong with them (zips, daft creases or MASSIVE heels ) i just need some un textured high boots with a very small heel. help meeeeeeeeee.....

  • ServantServant Posts: 765
    Perilous7 said:

    Can any kind soul help me? Im wanting to do a render of the princess from Battle of the Planets and i wanted to find some boots for her,virtually every thing i have seen that comes close has something wrong with them (zips, daft creases or MASSIVE heels ) i just need some un textured high boots with a very small heel. help meeeeeeeeee.....

    What base figure is it for? (ex. V4, Genesis 1, G2 Female, etc.) That  would help narrow down your choices. Also consider that Autofitting to Genesis figures (1 to 8) can have some warping issues here and there.

  • tkdroberttkdrobert Posts: 3,606
    Servant said:
    Perilous7 said:

    Can any kind soul help me? Im wanting to do a render of the princess from Battle of the Planets and i wanted to find some boots for her,virtually every thing i have seen that comes close has something wrong with them (zips, daft creases or MASSIVE heels ) i just need some un textured high boots with a very small heel. help meeeeeeeeee.....

    What base figure is it for? (ex. V4, Genesis 1, G2 Female, etc.) That  would help narrow down your choices. Also consider that Autofitting to Genesis figures (1 to 8) can have some warping issues here and there.

    For V4/G1 there are some Wonder Woman boots you can use from CGShare.  I use them all the time, just re-texture them.

  • Perilous7Perilous7 Posts: 40

    doh, sorry about that, well ideally gen2 or gen3 female as they seem to be autofitting ok. wonderwoman boots wont cut it as they need to be higher up and ideally pointed at the top.i know i can always trans map the shape at top if i need to. its just really the heels that are the problem

  • BrianP21361BrianP21361 Posts: 815
    Perilous7 said:

    doh, sorry about that, well ideally gen2 or gen3 female as they seem to be autofitting ok. wonderwoman boots wont cut it as they need to be higher up and ideally pointed at the top.i know i can always trans map the shape at top if i need to. its just really the heels that are the problem

    TerryMcG ( http://www.sharecg.com/pf/full_uploads.php?pf_user_name=TerryMcG) has a couple of high ones for V4 for free. He also has some not free ones on his Deviant Art page (https://terrymcg.deviantart.com/art/Jun-The-Swan-costume-for-V4-and-A4-454701319) that might work for you. I've have a pair that I used on X-men's Phoenix that are closer to what I think you are looking for, but I can't rememebr where I got them. Let me check when I get home tonight. 

  • Perilous7Perilous7 Posts: 40

    i just found this!       

    https://www.daz3d.com/slinky-suit-for-genesis-3-female-s

    :-) at last!!

  • BrianP21361BrianP21361 Posts: 815

    I forgot about that one. I have that too. 

  • mmitchell_houstonmmitchell_houston Posts: 2,510
    BrianP21361 said:
    RAMWolff said:

    Be really cool to see the original Defenders line up from back in the 70's.  Not sure if Nighthawk could be done. 

    A couple of pages back i posted my WIP of the original Defenders. It inspired me to keep working on them. Here's Namor. Nighthawk is next. 

    Here's how I made it:

    G2M, Superbelt, AllBack Hair, Shell - Animated Heaven - Designs of eternity, Feathered Wings for All, Custom Head Morph, Custom Face Texture, Kitbashers - Bracers v01, Briefs - Genesis 2 Starter Essentials

    That's a very good likeness of how he appeared during the silver age of comics (1970s). Nice job on the custom face work.

  • BrianP21361BrianP21361 Posts: 815
    mmitchell_houston said:
    BrianP21361 said:
    RAMWolff said:
    That's a very good likeness of how he appeared during the silver age of comics (1970s). Nice job on the custom face work.

    Thanks for the compliment.

  • BrianP21361BrianP21361 Posts: 815

    I picked up a copy of Generations Captain Marvel and Captain Mar-vell last week and I was inspired by the cover. Here's my interpretation. As usual, everything rendered in Carrara. Credits for the costumes are below.

    Captain Marvel  (female):V4, Lana Elite, V4 Bodysuit, V4 Bodysuit Gloves, Textures by Blodget, Courageous Boots, Courageous Belt, Gloria Short Hair

    Captain Mar-vell (male): G3M, Michael 7, Kitbashers Supersuit v03 by MightyMite, Ricardi Hair

     

     

    Captain Marvel Generations Cover Clouds.png
    1040 x 1600 - 900K
  • mmitchell_houstonmmitchell_houston Posts: 2,510
    dynagirlsdaddy_c70e7535d2 said:
    mmitchell_houston said:
    dynagirlsdaddy_c70e7535d2 said:

    Here are my original characters, Crimson Angel and her primary enemies (and siblings) Beta and Omega.

    I do like the premise of these characters. However, speaking strictly from an editorial point of view, you should consider changing Omega's contrast color from red to blue (or green). I suggest this because, in a crowded panel or a long shot, it might be possible to confuse Crimson Angel and Omega because they both have costumes that are black and red. 

     

     

    These are cool designs, as I said, but side-by-side they seem a bit similar. At least to my tired old eyes! Cool concepts -- looking forward to seeing more. 

    That is deliberate. They are identical twins, and Omega's outfit(which she would really only wear occasionally) is meant to mock Crimson Angel's. I can't say much more, because I have most of the story worked out, and don't wanna give anything away... Just in case I ever do make the comic.

    Okay -- that's a good reason. Thanks for filling us in.

  • StezzaStezza Posts: 8,734

    something a bit different smiley

    Done in Carrara

  • RedfernRedfern Posts: 1,647

    Sweet merciful Mogg!  The Herculoids!  Specifically, Tara (the human), Tundro the Tremendous (the rhino like beast) and Gloop and Gleep, the formless, fearless wonders!

    Arguably, that was my favorite action-adventure, science fantasy cartoon of the 1960s.  In recent years, I've wondered if Bill Hanna and Joe Barbera grew up reading the Barsoom novels (A Princess of Mars and others) by Edgar Rice Burroughs and was their opportunity to create something in that vein which would be totally their own property.

    Sincerely,

    Bill

  • BrianP21361BrianP21361 Posts: 815

    I used to liove that show when I was a kid. 

  • RedfernRedfern Posts: 1,647

    I still enjoy it, at least for the music.  Several of the "cues" came from Jonny Quest and Space Ghost, but it still had a fair amount of its own distinctive pieces, which, ironically were reused for later productions.

    Sincerely,

    Bill

This discussion has been closed.