Loading...
> >

So.... March Madness?

1…1213151718…24

Comments

  • AllenArtAllenArt Posts: 7,175

    Are the sales discounts also not working for anyone else?

  • Cris PalominoCris Palomino Posts: 12,440
    AllenArt said:

    Are the sales discounts also not working for anyone else?

    Please be specific in a statement like this so we have a better idea of what you mean. You also posted 12 minutes into the new sale day and it takes a while for the store to settle down, especially during big sales. ATM, I'm seeing discounts working.

  • lana_lasslana_lass Posts: 520
    edited March 2020

    Sigh, just when I get comfortable with my decision not to buy Josephene 8 they release some of the most gorgeous figures ever using her morph! Damn you Daz!! 
     

    But shout out to 3D Sublime, Eva1 and PS3Designs: Jessie and Zaida are stunning creations, and the Gorgrous Morphs set is one of the most varied and interesting yet in my opinion, humble as my opinion may be :)

    Post edited by lana_lass on
  • alex86firealex86fire Posts: 1,130
    lana_lass said:

    Sigh, just when I get comfortable with my decision not to buy Josephene 8 they release some of the most gorgeous figures ever using her morph! Damn you Daz!! 
     

    But shout out to 3D Sublime, Eva1 and PS3Designs: Jessie and Zaida are stunning creations, and the Gorgrous Morphs set is one of the most varied and interesting yet in my opinion, humble as my opinion may be :)

    I also love the fact that they released a spy-themed bundle to go together with the Josephine theme bundle.

    I hope this trend continues: male with a theme, female with same theme, additional bundles with same theme to go along with them.

  • miladyderyni_173d399f47miladyderyni_173d399f47 Posts: 2,396
    Cybersox said:
    Grin Without a Cat said:

    Is anyone besides me suprised that there isn't a St. Patricks's Day special of some sort up yet?

    Well, actually, I wondered about that, but DAZ is located in Utah where St. Patrick's Day probably isn't celebrated with the same enthusiam as in some other places given that UTAH has the lowest number of residents with Irish Ancestry of any state in the union at 5.9% (less than half of New York state and only a quarter of Massachusetts), and 62% of the population of Utah are Mormons who aren't allowed to consume any alcohol, including beer. 

     

    Last year there were St.Patrick's Day items. Not drinking oriented, IIRC. 

     

    kyoto kid said:
    Ruphuss said:

    so how many unwanted stuff you had to buy for your lower priced wanted ones ?

    ...actually none as I am on a tight budget and every purchase needs to count. that said yesterdays coupons helped a lot as a number of items on my wishlist qualified.  I'm pretty much only doing the flash sales (particularly the stacking ones) and coupon deals.  Still haven't used my PC+ PA coupon yet.

    Same here on the tight budget. The "Buy X New Releases to get This Stuff" or Pro Bundle sales are promos I rarely go for. And that isn't going to change now that I'm one of those people not working due to COVID-19 & without paid time off.

  • evacynevacyn Posts: 989
    Count me in on taking a spending break due to the flattened Canadian dollar. Might be a good time for me to use all of the stuff I bought during the past few sales lol
  • memcneil70memcneil70 Posts: 5,265

    Just want to say, have no idea who, when, or where it was reported or if Daz noticed it on their own, but 'Thank You!' for the white letters on the bluish/greenish background for today's page. I tried to read it before and my eyestrain was intense. So thanks.

  • IvyIvy Posts: 7,165
    edited March 2020

    Thanks DAZ Guys for offering Mika8 in the fast grabs today I've had her wishlisted and really wanted her for anime so greatful for you putting in the fast grabs . Thanks

    Post edited by Ivy on
  • MistaraMistara Posts: 38,675

    mebbe the new dragon is waiting for the big march madness finale?

  • CybersoxCybersox Posts: 9,264
    miladyderyni_173d399f47 said:
    Cybersox said:
    Grin Without a Cat said:

    Is anyone besides me suprised that there isn't a St. Patricks's Day special of some sort up yet?

    Well, actually, I wondered about that, but DAZ is located in Utah where St. Patrick's Day probably isn't celebrated with the same enthusiam as in some other places given that UTAH has the lowest number of residents with Irish Ancestry of any state in the union at 5.9% (less than half of New York state and only a quarter of Massachusetts), and 62% of the population of Utah are Mormons who aren't allowed to consume any alcohol, including beer. 

     

    Last year there were St.Patrick's Day items. Not drinking oriented, IIRC. 

    I thought the same thing, but when I checked, the only SPD item I saw from last year was this - https://www.daz3d.com/saint-patricks-day-set and it does include a mug of beer.  I went back and checked all the daily ads and the last time DAZ seems to have run any kind of specific St. Patrick's promotion was way back in 2011.  Seems strange as it would be a great excuse for a new leprechaun to replace the old K4 based one, but then again, it could break the flow of March Madness and how long has it been since there was a male fairy released?  A bunch of the other companies have run SPD promotions though, and Renderosity had a rather nice one this year. 

     

  • lana_lasslana_lass Posts: 520

    Just to flag up about the 50% don't stop shopping because of conoravirus code "stack up" code to those interested, the Genesis 8 Core Character Pro bundles that are in today's main banner as Related Madness can be used with the "stock up" code, e.g if you're a PC member and select three of the pro bundles to use the code on it will be down to a total cart price $66.13...

     

    https://www.daz3d.com/2019-genesis-8-pros#index=0&order=popular^1&filtered=1

     

  • MistaraMistara Posts: 38,675

    used the stackem on furries for micah and melody

  • kyoto kidkyoto kid Posts: 41,843
    Mystiarra said:

    mebbe the new dragon is waiting for the big march madness finale?

    ...we need a new cat before yet another dragon. There's been like five so far including the Crystal Dragon and that "Sub Dragon" thingie while we still are stuck with the 15 year old Mil Cat, with dForce fur as the only difference,

  • CybersoxCybersox Posts: 9,264
    lana_lass said:

    Just to flag up about the 50% don't stop shopping because of conoravirus code "stack up" code to those interested, the Genesis 8 Core Character Pro bundles that are in today's main banner as Related Madness can be used with the "stock up" code, e.g if you're a PC member and select three of the pro bundles to use the code on it will be down to a total cart price $66.13...

     

    https://www.daz3d.com/2019-genesis-8-pros#index=0&order=popular^1&filtered=1

     

    On the flip side, the one thing that you can be sure of with DAZ is all of those bundles will eventually be offered for free or extremely cheap fairly often, so I prefer to use store-wide coupons like this on PA products that are already on sale.  So, in this case, that meant Fluidos 2 for just $26.99 plus two DZ Fire products I'd been wanting for a while. :)

  • WendyLuvsCatzWendyLuvsCatz Posts: 40,024

    is just March Sadness for me crying

    Australian dollar and my retirement moneys dwindling I just sit at home with my 7 rolls of dunny paper and slowly render what I already have, stopped buying the 70% off things even

  • barbultbarbult Posts: 26,175
    WendyLuvsCatz said:

    is just March Sadness for me crying

    Australian dollar and my retirement moneys dwindling I just sit at home with my 7 rolls of dunny paper and slowly render what I already have, stopped buying the 70% off things even

    I think the truth is that we all already have enough content to keep us busy creating scenes and animations for the rest of our lifetime. blushIt's hard to resist the temptation of shiny new things every day, though, isn't it?

  • WendyLuvsCatzWendyLuvsCatz Posts: 40,024
    barbult said:
    WendyLuvsCatz said:

    is just March Sadness for me crying

    Australian dollar and my retirement moneys dwindling I just sit at home with my 7 rolls of dunny paper and slowly render what I already have, stopped buying the 70% off things even

    I think the truth is that we all already have enough content to keep us busy creating scenes and animations for the rest of our lifetime. blushIt's hard to resist the temptation of shiny new things every day, though, isn't it?

    yeah my content overfloweth like the trolleys at the shops some push

    takes up less room yes

  • kyoto kidkyoto kid Posts: 41,843

    ...two points (sort of related) that I have found rather frustrating.  The first first is when you click on a banner sale even though it says it's sorted by "New Arrivals" but several pages of older products begin to appear mixed in with the newer ones (like Gen3/Gen4 as well as RDNA items).. When you click on "sort by "New Arrivals"  again to get a proper top done sort, it resets back to page one and you have to go slogging through all the pages all over again.  This leads me to my second point:  why isn't there a box to enter a page number in and immediately go to it (this used to exist) . It would save time having to page through stuff you've already seen after having to go back to page one (as mentioned in the previous instance) of being able to pass over items you are not interested in (such as for example pages and pages of dForce clothing and G8 items)..

  • alex86firealex86fire Posts: 1,130
    edited March 2020
    kyoto kid said:

    ...two points (sort of related) that I have found rather frustrating.  The first first is when you click on a banner sale even though it says it's sorted by "New Arrivals" but several pages of older products begin to appear mixed in with the newer ones (like Gen3/Gen4 as well as RDNA items).. When you click on "sort by "New Arrivals"  again to get a proper top done sort, it resets back to page one and you have to go slogging through all the pages all over again.  This leads me to my second point:  why isn't there a box to enter a page number in and immediately go to it (this used to exist) . It would save time having to page through stuff you've already seen after having to go back to page one (as mentioned in the previous instance) of being able to pass over items you are not interested in (such as for example pages and pages of dForce clothing and G8 items)..

    I have kind of lost hope for any kind of optimization for the shop or filters to occur.

    I of course cannot say if Daz will do something about it or not but my hope for it is not there anymore.

     

    Regarding the page skip, the answer to that is easy.

    You can modify the link directly. Let's say you have this: https://www.daz3d.com/shop#p=10&filter_new=0&order=popular^1&filtered=1 . Just modify the number after p= and you skip to the desired page.

    Post edited by alex86fire on
  • kyoto kidkyoto kid Posts: 41,843

    ..thanks just wanted to get past all the G8/dForce stuff

  • LucielLuciel Posts: 475
    edited March 2020

    The current rather terrible exhange rate has limited me too. It's basically like having a plus 50% charge on every order, which does make deals much less tempting..  

    alex86fire said:
    kyoto kid said:

    ...two points (sort of related) that I have found rather frustrating.  The first first is when you click on a banner sale even though it says it's sorted by "New Arrivals" but several pages of older products begin to appear mixed in with the newer ones (like Gen3/Gen4 as well as RDNA items).. When you click on "sort by "New Arrivals"  again to get a proper top done sort, it resets back to page one and you have to go slogging through all the pages all over again.  This leads me to my second point:  why isn't there a box to enter a page number in and immediately go to it (this used to exist) . It would save time having to page through stuff you've already seen after having to go back to page one (as mentioned in the previous instance) of being able to pass over items you are not interested in (such as for example pages and pages of dForce clothing and G8 items)..

    I have kind of lost hope for any kind of optimization for the shop or filters to occur.

    I keep wanting there to be really basic things like go to a sale page and be able to filter by "hair" or "clothing" or "texture packs". Or even by a price range, or several other things it seems every other store on the planet has but here.

    What makes it even weirder is that there are category pages, but no way of filtering by those categories.   laugh

    Post edited by Luciel on
  • kyoto kidkyoto kid Posts: 41,843
    edited March 2020

    ....really becoming  a bit frustrated with the Stick up Sale. I have three items in the cart, all from the selected list, but keep getting the "not valid" error when I put in the code. (and I took my time hand entering it)

    The items I have are:

    Circulus Pacis: (4.99$)

    Evil Queen Set for G2F (7,54$), but for some reason is shows up as 6.28$ when I add the third item which is:

    Gothy Punk for Teen Raven 8  (9.22$) but also shows with a lower price of 7.69$

    So some kind of unknown pricing adjustment is making one of these tow (or both) trigger the invalid error 

    The frustration comes for about 20 min of dealing with this and only about 30 min to go before Daz changes prices at 00:00. as entering a support ticket would be moot.

    ETA:

    OK apparently PC+ items are invalid, however not only does it not specify in the "fine print" on the banner.  There are also numerous PC+ products on the Selected Items page for the coupon.

    All the banner "fine print" said was: 

    Does not apply to New Releases, Gift Cards, or Fast Grab.

    I'm not the only one to run afoul of this as on the 2020: There's Always Another Sale thread, others mentioned they ran into the same issue, and it was finally mentioned that PC+ items were not valid..

    https://www.daz3d.com/forums/discussion/comment/5448051/#Comment_5448051

    Really misleading as like I mentioned, PC+ items appear on the pages relating to the coupon deal  (including Circulus Pacis and the Mini Dumper Truck that I replaced it former with).

    I did manage to swap the offending PC+ item out and pick something else near in price (which surprisingly I actually can use) just in the nick of time (3 min to spare).

    Sad that I wasted a fair part of my evening with this that I could have used working on character design. 

    Post edited by kyoto kid on
  • alex86firealex86fire Posts: 1,130
    Luciel said:

    The current rather terrible exhange rate has limited me too. It's basically like having a plus 50% charge on every order, which does make deals much less tempting..  

    alex86fire said:
    kyoto kid said:

    ...two points (sort of related) that I have found rather frustrating.  The first first is when you click on a banner sale even though it says it's sorted by "New Arrivals" but several pages of older products begin to appear mixed in with the newer ones (like Gen3/Gen4 as well as RDNA items).. When you click on "sort by "New Arrivals"  again to get a proper top done sort, it resets back to page one and you have to go slogging through all the pages all over again.  This leads me to my second point:  why isn't there a box to enter a page number in and immediately go to it (this used to exist) . It would save time having to page through stuff you've already seen after having to go back to page one (as mentioned in the previous instance) of being able to pass over items you are not interested in (such as for example pages and pages of dForce clothing and G8 items)..

    I have kind of lost hope for any kind of optimization for the shop or filters to occur.

    I keep wanting there to be really basic things like go to a sale page and be able to filter by "hair" or "clothing" or "texture packs". Or even by a price range, or several other things it seems every other store on the planet has but here.

    What makes it even weirder is that there are category pages, but no way of filtering by those categories.   laugh

    I totally agreed! I submitted a ticket about just that: filtering by category. I encourage you to do the same. Maybe if enough people say something about it they will start implementing. Especially since it shouldn't be that hard.

  • MistaraMistara Posts: 38,675

    Dragon 8 

  • Noah LGPNoah LGP Posts: 2,617

    I'm still waiting for a Quarantine Madness offer...

  • davesodaveso Posts: 7,759
    Noah LGP said:

    I'm still waiting for a Quarantine Madness offer...

    yeah ... how many DAZ customers out of work?

     

  • alex86firealex86fire Posts: 1,130
    While some customers are probably out of work I imagine that a lot of other types of expenses (like going out) will start to be redirected towards stuff you can do in your house, like rendering. So I think in the end it will be a balance and the customer base will remain pretty constant.
  • Payat ParinPayat Parin Posts: 1,170
    Noah LGP said:

    I'm still waiting for a Quarantine Madness offer...

    No money to buy expensive stuff like 3D

  • DripDrip Posts: 1,237
    alex86fire said:
    While some customers are probably out of work I imagine that a lot of other types of expenses (like going out) will start to be redirected towards stuff you can do in your house, like rendering. So I think in the end it will be a balance and the customer base will remain pretty constant.

    Well, there are those with temp jobs, who are increasingly becoming people with no-jobs. And depending on the country you live in, even a contract might not mean much when your employer is going out of business due to some lockdown.

  • Noah LGPNoah LGP Posts: 2,617
    edited March 2020
    Habulin Dati said:
    Noah LGP said:

    I'm still waiting for a Quarantine Madness offer...

    No money to buy expensive stuff like 3D

     

    A discount on the entire store would be welcome.

    Post edited by Noah LGP on
Sign In or Register to comment.