more....Wacky Modelling ~ In Carrara ~

1…6970717375

Comments

  • wsterdanwsterdan Posts: 3,690

    Great Caesar's Ghost!

    Nope, wrong comic.

    Cool ghosts, even cooler image! I still love Ghostly 2026, awesome character!

  • StezzaStezza Posts: 9,328
    edited October 19

    come across some weird and wacky figures the other week on Rendo and wondered if they would work in Carrara..

    Then the other day I seen 'em again at Vanishing Point ... so I was intrigued by these wacky looking characters and so I bought Harry Chuchupeiker (for Poser) just to see if it worked ok in Carrara.

    and it did!
    I may buy some more!

     

     

    Halloween SpookToon 2026.png
    900 x 675 - 1M
    Post edited by Stezza on
  • wsterdanwsterdan Posts: 3,690
    edited October 19

    An excellent character and your render really pumps it up (especially in conjunction with your other characters), another great asset and piece of art!

    I saw him and didn't know how well he'd import into DAZ Studio, but I may check him out. I'm currently spending too much on Synty characters, though, so maybe next month.

    The artist had some other characters I found interesting, like Sera Vant:

    https://www.vanishingpoint.biz/productdetail.asp?productID=3996

    Thanks for showing him off!

    Post edited by wsterdan on
  • StezzaStezza Posts: 9,328

    wsterdan said:

     

    I saw him and didn't know how well he'd import into DAZ Studio, but I may check him out.

    https://www.vanishingpoint.biz/productdetail.asp?productID=3996

    Thanks for showing him off!

    I loaded him into DS ( 4.6 ) and he worked and posed ok.. then saved him as a Scene Subset in DS to use in Carrara to fix an issue yes

    The mesh of this figure is quads ( so I'm guessing all his models are also ) and I thought when I first seen the models that they may of been created in meshy or something... the uv mapping sux but can be fixed in Gemini I'm guessing.

    I'll experiment cool

  • WendyLuvsCatzWendyLuvsCatz Posts: 41,942
    edited October 20

    Stezza said:

    wsterdan said:

     

    I saw him and didn't know how well he'd import into DAZ Studio, but I may check him out.

    https://www.vanishingpoint.biz/productdetail.asp?productID=3996

    Thanks for showing him off!

    I loaded him into DS ( 4.6 ) and he worked and posed ok.. then saved him as a Scene Subset in DS to use in Carrara to fix an issue yes

    The mesh of this figure is quads ( so I'm guessing all his models are also ) and I thought when I first seen the models that they may of been created in meshy or something... the uv mapping sux but can be fixed in Gemini I'm guessing.

    I'll experiment cool

    I think Meshy was used too, unlike many products people are accusing of being AI in the DAZ store, Meshy produces very good topology, however a fair bit of work was likely done to rig it for Poser as well

    I have no objection to people using AI as long as they disclose it

    which they did when it was on the Renderosity marketplace before they moved it to Vanishing Point

    however there was some discussion on the forum there that likely influenced the move

     

    Post edited by WendyLuvsCatz on
  • wsterdanwsterdan Posts: 3,690

    Stezza said:

    wsterdan said:

     

    I saw him and didn't know how well he'd import into DAZ Studio, but I may check him out.

    https://www.vanishingpoint.biz/productdetail.asp?productID=3996

    Thanks for showing him off!

    I loaded him into DS ( 4.6 ) and he worked and posed ok.. then saved him as a Scene Subset in DS to use in Carrara to fix an issue yes

    The mesh of this figure is quads ( so I'm guessing all his models are also ) and I thought when I first seen the models that they may of been created in meshy or something... the uv mapping sux but can be fixed in Gemini I'm guessing.

    I'll experiment cool

    That's all the info I need, thanks!

    The artist does have some interesting characters and a very interesting style. 

  • wsterdanwsterdan Posts: 3,690

    WendyLuvsCatz said:

    Stezza said:

    wsterdan said:

     

    I saw him and didn't know how well he'd import into DAZ Studio, but I may check him out.

    https://www.vanishingpoint.biz/productdetail.asp?productID=3996

    Thanks for showing him off!

    I loaded him into DS ( 4.6 ) and he worked and posed ok.. then saved him as a Scene Subset in DS to use in Carrara to fix an issue yes

    The mesh of this figure is quads ( so I'm guessing all his models are also ) and I thought when I first seen the models that they may of been created in meshy or something... the uv mapping sux but can be fixed in Gemini I'm guessing.

    I'll experiment cool

    I think Meshy was used too, unlike many products people are accusing of being AI in the DAZ store, Meshy produces very good topology, however a fair bit of work was likely done to rig it for Poser as well

    I have no objection to people using AI as long as they disclose it

    which they did when it was on the Renderosity marketplace before they moved it to Vanishing Point

    however there was some discussion on the forum there that likely influenced the move

    I use Meshy all the time to convert my images to 3D models for printing; I have to paint them in my slicer because the Meshy paint job isn't 100%. That said, getting a 3D mesh is the easy part, if the artist took that mesh (and the Meshy meshes are far from optimized), tidied it up, re-textured it and then rigged it, I certainly wouldn't consider it an "AI" Poser figure, but a Poser figure that used some AI in its creation. The hard part, to me, wasn't "AI". 

  • WendyLuvsCatzWendyLuvsCatz Posts: 41,942

    actually hes still at Rendo https://www.renderosity.com/marketplace/products/172444/harry-chuchupeiker

    they all had vanished at one pointcheeky

  • wsterdanwsterdan Posts: 3,690
    edited October 20

    they all had vanished at one pointcheeky

    Ha!  laugh 

    I see he's still under "Vanishing Point" at Rendo, maybe they took them down while he was being picked up by VP.

    Post edited by wsterdan on
  • StezzaStezza Posts: 9,328
    edited October 20

    Here is Harry on the left in Carrara and with new outfit on   the right in Gemini smiley

    I'll call him Si laugh

     

    Si the one.png
    800 x 600 - 831K
    Post edited by Stezza on
  • wsterdanwsterdan Posts: 3,690

    Awesome image, love it!

    I notice he has a brother, "Greg" availble at Rendo as well!

    Truly fun stuff!

  • StezzaStezza Posts: 9,328
    edited October 23

    Today I cubed a wacky dachshund ... only because my daughter has two of them! smiley

    boned and morphed and named him Dachs

     

    Dachs.png
    800 x 600 - 197K
    Halloween Graveyard Dachs Toon2026.png
    900 x 675 - 905K
    Post edited by Stezza on
  • StezzaStezza Posts: 9,328
    edited October 24

    I noted somewhere amongst the forum boards a mention of a busted or popped balloon

    Well, it didn't escape Dachs's notice and he thought popping balloons at the skatepark on Halloween to scare the kids was fun! devil

    modelled a popped balloon.... why.... I dunno!

    Dachs Balloon Busted.png
    800 x 600 - 741K
    Post edited by Stezza on
  • StezzaStezza Posts: 9,328
    edited October 24

    a popped balloon from a cube with morphs

    easily change colours if you want via the texture room..

    it's in the zip file all busted up for you to add more morphs or whatever smiley

     

    Popped Balloon.png
    800 x 600 - 166K
    zip
    zip
    Balloon Popped.zip
    65K
    Post edited by Stezza on
  • WendyLuvsCatzWendyLuvsCatz Posts: 41,942

    a flaccid limp rubber surprise

    just what I might need one day yes

  • wsterdanwsterdan Posts: 3,690

    Stezza said:

    modelled a popped balloon.... why.... I dunno!

    Why? Because you can!

    Love the character, great renders!

    This thread is my favourite one to visit here, not only for fun but for inspiration. Wacky, and amazing at the same time.

  • therixxtherixx Posts: 267

    Thank you Stezza!
    Hmmmm, I see that I am not regularly receiving the forum updates...
    I have to come back to check often, even without notices

  • StezzaStezza Posts: 9,328
    edited October 26

    no probs... I often wonder if that little star actually works that's sitting ontop of each page... I've never tried it.

    So, yesterday I cubed a blackboard because I came across another one elsewhere in the internets that was about the history of mathematics... though some of the formulas were legit there was also a lot of jibberish..

    So, I went off on a tangent and thought I'd cube up acute one, well that was the theory. It seems that Mathematics has been around so long that even its history has a long division but even the history of mathematics is proof that humans will go to extraordinary lengths just to avoid estimating.

     

    History of Maths.png
    800 x 600 - 763K
    Post edited by Stezza on
  • WendyLuvsCatzWendyLuvsCatz Posts: 41,942
    edited October 26

    I could probably model better if I actually used some maths cheeky

    instead of Google 

    used to have books of trigonometry tables and slide rulers to work stuff out, now I just ask the interwebs

    Post edited by WendyLuvsCatz on
  • wsterdanwsterdan Posts: 3,690

    Stezza said:

     It seems that Mathematics has been around so long that even its history has a long division…

     

    Ha! That's as funny as your excellent image, great stuff there!

    Thanks for a double-chuckle before bedtime, much appreciated! 

  • StezzaStezza Posts: 9,328
    edited October 27

    no cubing today, instaed I went to github and grabbed the micro duck stl file.....

    OMG! how many cubes make up that little duck!

    spent a while to get it to a practice render.... but will take a long while grouping the billion bits of cubes so I can pose it more.

    MicroDuck.png
    800 x 600 - 572K
    Post edited by Stezza on
  • WendyLuvsCatzWendyLuvsCatz Posts: 41,942
    edited October 27

    someone only knew how to duplicate the default cube in Blender?

    Post edited by WendyLuvsCatz on
  • wsterdanwsterdan Posts: 3,690

    Stezza said:

    no cubing today, instaed I went to github and grabbed the micro duck stl file.....

    OMG! how many cubes make up that little duck!

    spent a while to get it to a practice render.... but will take a long while grouping the billion bits of cubes so I can pose it more.

    Yeah, STLs are usually way too high for me to play with on most days of the week. Especially when you compare it to your original characters, that's like… Halloween-level scarey!

  • StezzaStezza Posts: 9,328
    edited October 29

    The chickens aren't safe!

    MicroDuckOff.png
    800 x 600 - 568K
    Post edited by Stezza on
  • wsterdanwsterdan Posts: 3,690

    A duck eating a chicken? You realize if a giant turky eats them both, you've made turducken, right?

    laugh

    Great image!

  • StezzaStezza Posts: 9,328
    edited October 29

    hmmm ... the word fowl comes to mind with that portmanteau laugh

     

    Land of Aus.png
    800 x 600 - 953K
    Post edited by Stezza on
  • wsterdanwsterdan Posts: 3,690

    To quote a great explorer, "I knew I shoulda taken that left turn at Albuquerque!".

    Great image!

  • StezzaStezza Posts: 9,328
    edited October 29

    and to give it a Halloween feel.... laugh

     

     

    Land of AusT.png
    1024 x 768 - 1M
    Post edited by Stezza on
  • wsterdanwsterdan Posts: 3,690

    Ooo, even better!

  • WendyLuvsCatzWendyLuvsCatz Posts: 41,942

    I followed the Yellow Cake road and ended up at Olympic Dam

Sign In or Register to comment.