NEW! Novica & Invited Guest Contributors Tips & Product Reviews Pt 6

11314161819100

Comments

  • FirstBastionFirstBastion Posts: 7,220
    edited December 1969

    Klank is cute! and you can never have too many robots.

  • SasjeSasje Posts: 835
    edited December 1969

    Invited Guest Contributor

    - Shinjuku Outfit for Genesis 2 Female(s) http://www.daz3d.com/shinjuku-outfit-for-genesis-2-female-s
    - Mei Lin 6 http://www.daz3d.com/mei-lin-6
    - Pookie Hair http://www.daz3d.com/pookie-hair
    - Capsces Poses Mei Lin 6 http://www.daz3d.com/capsces-poses-mei-lin-6

    kunfu_bewerkt-1.jpg
    800 x 1035 - 182K
  • Serene NightSerene Night Posts: 17,553
    edited December 1969

    Great image Sasje! You lighting and the character are spectacular!

    The transparent cuffs on the outfit and those sleeves are great!

    Those shoulder cuffs make me scratch my head though. Not sure about that. =-)

  • NovicaNovica Posts: 23,859
    edited April 2015

    Sasje said:
    Invited Guest Contributor[/colr]
    - Shinjuku Outfit for Genesis 2 Female(s) http://www.daz3d.com/shinjuku-outfit-for-genesis-2-female-s
    - Mei Lin 6 http://www.daz3d.com/mei-lin-6
    - Pookie Hair http://www.daz3d.com/pookie-hair
    - Capsces Poses Mei Lin 6 http://www.daz3d.com/capsces-poses-mei-lin-6

    I like the way the back piece hangs down. Pookie Hair looks so good with that outfit! I have to laugh at the shoes- that requires a lot of balance, doesn't it?! The slight lift off the ground of the (Edit) front foot is very realistic. Looks like she can handle it. Great action pose, I do really like that one.

    Post edited by Novica on
  • NovicaNovica Posts: 23,859
    edited December 1969

    I'm testing Tiami, decided to go for Callie due to Cory, and it also dropped Ron's brush set down below $9. The pricing is apparently really acting up for people (not in a good way) as the texture sets weren't giving discounts. I made a LOT of changes to Taimi, the bust, waist, hips, thighs, calves, etc, and for a cartoon gal she's rather cute. This will be a very long render time and I'm headed off to get some sleep (going on 5am)

    In case you didnt see the banner, when you buy Callie you get a 30%discount on Cory.

    Here's the one I'm rendering (with a lot of body changes.)
    http://www.daz3d.com/fwsa-tiami-for-callie-6

  • Serene NightSerene Night Posts: 17,553
    edited December 1969

    That offer is tempting. And I really like Tiami. In fact, I think she has a beautiful skin. My reservations about the character have to do with the derivative qualities which I just can't overcome.

  • NovicaNovica Posts: 23,859
    edited April 2015

    Yep, I figured there'd be things related to Callie to reward purchasers. I really like the Aiko 6 Pro Bundle (already have it) Janna Hair, Lotus, FW Lin, Miwa Anime Hair, 2 sets of poses, etc- so I'm happy to see that offered to others for a good discount. The poses that aren't in that bundle are only 1.67 and 1.99 so scoop 'em up if you bought Callie. They have a lot of "good starting point" positions for you to tweak, if you don't like the originals.

    http://www.daz3d.com/capsces-flirtatious-poses-for-aiko-6
    http://www.daz3d.com/bwc-cute-aiko-poses-for-aiko-6

    http://www.daz3d.com/oot-styles-for-cyria is a texture set for the Cyria outfit (edit) which is in the Aiko 6 Pro Bundle. Keep an eye on that if you have/get the Pro bundle. (not currently on sale)

    Both these drop to $5.18 if you own Callie.
    http://www.daz3d.com/i13-100-essential-expressions-for-v6
    http://www.daz3d.com/i13-100-essential-expressions-for-michael-6

    All of this in the cart is $14.03 if you own Callie. :) Thanks Daz!

    Post edited by Novica on
  • NovicaNovica Posts: 23,859
    edited April 2015

    FWSA Tiami for Callie 6 ( DAZ Originals Fisty Fred Winkler Art Sabby)
    Fantasia For Genesis 2 Female(s) (DAZ Originals / Mada / Sarsa)
    Gothic Hair For Genesis and Genesis 2 Female(s) (DAZ Originals / goldtassel) (

    http://www.daz3d.com/fwsa-tiami-for-callie-6
    http://www.daz3d.com/fantasia-for-genesis-2-female-s
    http://www.daz3d.com/gothic-hair-for-genesis-and-genesis-2-females

    EDIT: There are a LOT of body adjustments- chest, hip, thighs, waist- her waist was increased, the thighs increased, calves reduced, breast greatly reduced, etc.

    I used Fantasia so you could see the skin, and wanted to point out the excellent staff and shoes- quite different. I got it to kit bash as obviously this won't go in a kid's book. Background is Ron's Spider Webs. This is showing 50% off, is there a sale on Ron's right now? (I don't have time to go through all the sales pages to look at things I don't already own and find it.)
    http://www.daz3d.com/rons-spider-webs

    Texture sets (one is new! 81% off.)
    http://www.daz3d.com/koneko-tatsu
    http://www.daz3d.com/fancy-fantasia

    Click to enlarge, click again. Large Render.

    TiamiFantasiaFemaleGothHair2.jpg
    1496 x 2000 - 2M
    Post edited by Novica on
  • Serene NightSerene Night Posts: 17,553
    edited December 1969

    Novica, that render is very nice and I love that skin Tiami looks nice. I like what you did making a surreal pattern out of the webs.

    You are right, it is a great value to pick up Aiko 6 content right now.

  • NovicaNovica Posts: 23,859
    edited December 1969

    Clicked on the banner for the 60% off Animal Bundles, and some are more than that.
    This is 80%
    http://www.daz3d.com/singers-of-chzor-bundle

    Have Sadie? Here's a funky one! (I don't remember seeing this before. And I do have Sadie!) Look at the thumbnails.
    http://www.daz3d.com/space-sadie-pack

    Remember- check Fast Grab. It has changed. I snagged Beach Babe Action, I didn't have that one. :)

    And Happy Anniversary to Dumor3D!

  • NovicaNovica Posts: 23,859
    edited December 1969

    Well, Cory is out. Hmmm, not what I expected. (Nuff said.) And the mermaid looks like she just swam out of the Red Light District with that skimpwear top- if you can even call those tops. So disappointing for what I need. Will see how the final price shakes out, I might be able to morph the top or zbrush something when I get back to doing that.

    I do like some of the Cory characters and will see what they do about the pricing. Ridiculous for 5 items.

  • NovicaNovica Posts: 23,859
    edited December 1969

    And I noticed in the thumbnail promos, they put two of the same product (the Aviator stuff) so it looks like there's more than 5 products. It seems like there are six but when you look at the bottom at what's included, it's a measly five. Seriously- 130+ dollars for 5 things?

  • SassyWenchSassyWench Posts: 602
    edited December 1969

    Price has been adjusted now. :)

  • Tramp GraphicsTramp Graphics Posts: 2,401
    edited December 1969

    Novica said:
    Well, Cory is out. Hmmm, not what I expected. (Nuff said.) And the mermaid looks like she just swam out of the Red Light District with that skimpwear top- if you can even call those tops. So disappointing for what I need. Will see how the final price shakes out, I might be able to morph the top or zbrush something when I get back to doing that.

    I do like some of the Cory characters and will see what they do about the pricing. Ridiculous for 5 items.

    Well, considering that traditionally Mermaids were depicted completely topless, the shell and starfish "bras" are pretty tame, and are no smaller than what Ariel wore in the Disney movie.
  • NovicaNovica Posts: 23,859
    edited December 1969

    I have to disagree respectfully. Disney could NEVER release a mermaid like that for kids. They're not even close with the tops.

    mermaidAriel.jpg
    1333 x 949 - 148K
  • NovicaNovica Posts: 23,859
    edited December 1969

    Flash sale SWAM.
    Thanks for the heads up on the bundle price. Now its a good deal.

  • NovicaNovica Posts: 23,859
    edited April 2015

    Don't forget to use your monthly PC/+ codes as it's towards the end of the month. I did go ahead and get the bundle and took another $6 off.

    Post edited by Novica on
  • Tramp GraphicsTramp Graphics Posts: 2,401
    edited December 1969

    Novica said:
    I have to disagree respectfully. Disney could NEVER release a mermaid like that for kids. They're not even close with the tops.
    The only difference between the Disney shell bra and the Calli shell bra is the angle of the shells (and lack of back strap). On Ariel's the shell face bottom to bottom, which allows them to connect, providing cleavage. The Callie shells are oriented vertically and are thus separated. Therefore, the breasts fall loosely. Both cover each of the breasts the same amount, however. Thus the size of the actual shells is comparable.

    It should also be noted that Ariel has smaller breasts in some of those shots (not exactly consistent there).

    Regardless, Neither is "traditionally" accurate. As I said, traditional depictions of mermaids on maps, and other manuscripts from the middle ages and renaissance, Mermaids were depicted without any bra at all. This makes sense since any clothing will add drag under water, and the more clothing, the greater the drag.

  • NovicaNovica Posts: 23,859
    edited December 1969

    I think you spend too much time staring at certain parts of the female anatomy. :)

  • Tramp GraphicsTramp Graphics Posts: 2,401
    edited December 1969

    Novica said:
    I think you spend too much time staring at certain parts of the female anatomy. :)
    I shall neither confirm nor deny that. :coolgrin:
  • NovicaNovica Posts: 23,859
    edited December 1969

    Rick For Cory 6 (gypsyangel)
    Drifter Hair for Genesis 2 Male(s) (DAZ Originals / Goldtassel)
    Cutting Loose for Genesis 2 Male(s) (JoeQuick)

    http://www.daz3d.com/rick-for-cory-6
    http://www.daz3d.com/drifter-hair-for-genesis-2-males
    http://www.daz3d.com/cutting-loose-for-lee-6

    Testing Rick. I put a semi smile on him to see the teeth. I do like that they aren't the long, typically blocky square teeth. He looks better from some angles than others. I'm not particularly in love with Cory et al, but I'm still going to test it before deciding if I am going to keep it.

    Love the Cutting Loose outfit, wow what a variety of materials available! Drifter Hair renders fairly quickly. Not ultra fast, but at a good pace.

    RickCoryDrifterHrCuttingLoose3.jpg
    643 x 900 - 305K
    RickCoryDrifterHrCuttingLoose2.jpg
    643 x 900 - 298K
    RickCoryDrifterHrCuttingLoose.png
    774 x 1414 - 731K
  • NovicaNovica Posts: 23,859
    edited April 2015

    Cory 6 (Daz Originals)
    FW Oliver HD Megapack (Darc Clan /Fisty / Fred Winkler Art)

    http://www.daz3d.com/cory-6
    http://www.daz3d.com/fw-oliver-hd-megapack

    My goodness, when this render came in, I thought "Look at those eyes!" This is Cory clicked directly from Actor under Genesis 2 Male, I didn't pick eye color, etc. I am doing a side view right now. Have to say Oliver Hair goes well with him.

    Will add a side view in a few minutes. (EDIT: DONE)

    CoryOliverHair2.jpg
    786 x 1100 - 284K
    CoryOliverHair.jpg
    785 x 986 - 262K
    Post edited by Novica on
  • NovicaNovica Posts: 23,859
    edited December 1969

    Here's Cory with some morphs to change the nose and give a squared jaw, etc. Mouth not changed much.

    Head:
    Jayce 0.77
    Cory 0.93
    Brodie 0.083
    ga-rick -0.11
    Travis 0.37
    Oliver 0.15
    Jake 0.17

    Head morphs MGA:
    Sloan 0.42
    Reed 0.20
    Omar 0.25

    CoryOliverHair3Morphed.jpg
    786 x 1100 - 329K
  • NovicaNovica Posts: 23,859
    edited April 2015

    FWSA Kresh for Cory 6 (DAZ Originals / Fisty & Darc / Fred Winkler Art / Sabby)
    http://www.daz3d.com/fwsa-kresh-for-cory-6

    Of everything so far, Kresh appeals to me the most.
    (EDIT: One of my main lights was a dull sage green.)

    KreshCory.jpg
    755 x 1046 - 342K
    Post edited by Novica on
  • NovicaNovica Posts: 23,859
    edited April 2015

    Someone asked about Coral vs not loading Coral on Callie, so-
    The one on the left is the Coral mermaid loaded on the G2Female base, the other is the CoralMermaid which I assume is loaded from Callie.

    I am doing plain Coral (not the mermaid) and Coral on G2F (no Callie) with a closeup of the faces. Rendering those now. Here's the mermaid renders.

    EDIT: In the second ones with the faces only, Cory is on the left, the G2F base is the one on the left.

    Coralthen_G2Fbase.jpg
    1350 x 900 - 435K
    Coral_G2FbaseCoral.jpg
    786 x 1100 - 278K
    Post edited by Novica on
  • NovicaNovica Posts: 23,859
    edited April 2015

    FWSA Kirk for Cory 6 (DAZ Originals / Fred Winkler Art / Sabby)
    Jake Hair for Genesis 2 Male(s) (DAZ Originals / Propschick)
    Brodie Casual for Genesis 2 Male(s) (DAZ Originals 4blueyes)

    http://www.daz3d.com/fwsa-kirk-for-cory-6
    http://www.daz3d.com/jake-hair-for-genesis-2-male-s
    http://www.daz3d.com/brodie-casual-for-genesis-2-male-s

    And here's Kirk. I used Brody Casual shirt with Fabricator applied. I thought it was sad that there was only the plain white/gray shirt, no prints at all, with that product. It's a very nice shirt, I like the folds in it.

    kirkCoryBrodyCasualJakeHair2.jpg
    1255 x 1400 - 676K
    kirkCoryBrodyCasualJakeHair.jpg
    1255 x 1400 - 839K
    Post edited by Novica on
  • Serene NightSerene Night Posts: 17,553
    edited December 1969

    I really like the mermaid tail. Not a fan of the rest. Can it be added to a normal Genesis 2 female like the conforming tail made earlier?

    The male hair Jake hair has some potential. The sideburns and hair above the ears is the weak area. Even in the promo art it looks out of place. Are there any adjustments to fix that?

  • NovicaNovica Posts: 23,859
    edited December 1969

    When you go into Scene to the hair>head, you can bend, twist, scale but no XYZ options (I was going to move it back.) In the hair Actor morphs, you can change the hair over the ear (by 223% shown here) to get that lowered. You can NOT get that sideburn pushed more toward the ear with the morphs though. Shown in screenshot: the only two sideburn options (see first two.) I haven't tried unparenting the hair yet to see if I can move it.

    jakeHairScreenshot.jpg
    1980 x 1016 - 206K
  • NovicaNovica Posts: 23,859
    edited December 1969

    I changed the target to none and fiddled with rotating and translating and FORGET IT. The temple looks awful when you try to get the sideburns moved closer to the ear, and it would take an hour or more to get it even halfway decent- then the back doesn't do right even when you scale it to be bigger to fix the front. Not worth the effort.

  • NovicaNovica Posts: 23,859
    edited April 2015

    HEADS UP

    The mermaid tail and bra cups work very nicely with Effie.
    My studio crashed (eliminating all the cuss words here) after half an hour of toying with her.


    Load up the Coral Mermaid. Load up Effie or other G2 figure separately, then move the tail and bra to your new figure. Right click and do a Fit To. There are a lot of morphs and try Teen Josie for the more slender figures

    I'm trying this again real quick but need to get outside and do yard work- it's only in the 70's and temps going up fast.

    Post edited by Novica on
This discussion has been closed.