An Attempt of a "Limited Time Freebie" Message Only Email Alert Thread

Comments

• Kerya Posts: 10,943

  June 2014 edited December 1969

  Well - these are limited time freebies. If I were you I would grab them anyway, you will not always be quite new ... :)
• MilosGulan Posts: 1,950

  June 2014 edited December 1969

  Yes, get those plants and read up the thread, i asked same question and got answer. Look at the page 11 of this thread from the middle of the page, i hope it will help.
• cecilia.robinson Posts: 2,208

  June 2014 edited December 1969

  dave.evert said:

  Kerya said:

  dave.evert said:

  none01ohone said:

  Xfrog have some freebies marked as 'NEW'. Well they are new to me!

  http://xfrog.com/category/samples.html

  Will those plants that are for free download work in Daz Studio as well? Or is it just for their software?

  Download the obj files - those are working in DS.
  There is just the one funny aspect: XFrog is reading transmaps the opposite way to Dazstudio/Poser - you will have to load the transmaps in an image editing software and invert black and white.

  Thanks very much for reply! I am really quite new so I don´t know what transmaps exactly are and how to invert them so I might as well leave those plants alone if there is this issue. Unless you could give me a quick "How to" guide : ) : D

  You can use any graphics software like GIMP and there should be an option to revert the colours. What is black in any product from XFrog needs to be turned into white and the other way around. Leave the format as is. Just keep an eye on the measurements - you must leave the size untouched.
• MilosGulan Posts: 1,950

  June 2014 edited December 1969

  If you need more help just ask, i am new too but i probably will be able to help.
  http://www.daz3d.com/daily-freebie/slime-beast
• MilosGulan Posts: 1,950

  June 2014 edited December 1969

  http://www.daz3d.com/daily-freebie/classic-shields
• Kerya Posts: 10,943

  June 2014 edited December 1969

  http://www.daz3d.com/daily-freebie/waste-container

  and (needs your email) a restaurant by Dreamlight:
  http://www.dream-lounge.com/freerestaurant/?&AID=408
• MilosGulan Posts: 1,950

  June 2014 edited December 1969

  Oh my, that restaurant looks like a place i used to visit when i was younger. Thanks so much for it.
• Faeryl Womyn Posts: 3,278

  June 2014 edited December 1969

  It won't download, the restaurant from dreamlight. I go to the page, enter the email and on the next page click the DS/Poser HERE, which takes me to another page that only has the word Ok in the top left corner, but no download. Even got an email which does the same thing.
• launok Posts: 778

  June 2014 edited December 1969

  FaerylWomyn said:

  It won't download, the restaurant from dreamlight. I go to the page, enter the email and on the next page click the DS/Poser HERE, which takes me to another page that only has the word Ok in the top left corner, but no download. Even got an email which does the same thing.

  I am having the exact problem ... leading to a page with only OK! on it. If I right click the blue download button as suggested the .rar is only like 2 bytes and damaged.
• fairyfantastic Posts: 116

  June 2014 edited December 1969

  im having the same problem to just getting ok wen click here
• launok Posts: 778

  June 2014 edited June 2014

  I have just sent Val Cameron (Dreamlight) a reply on the email I got to the restaurant freebie that the downloads doesn't work. Hopefully he will get the email if it's not an automated email.

  EDIT WITH UPDATE:

  I got an answer back from Val Cameron that the downloads to the restaurant is fixed. It is so, I am currently downloading! :cheese:

  Laura

  Post edited by launok on June 2014
• MilosGulan Posts: 1,950

  June 2014 edited June 2014

  It worked for me, i just entered email then clicked Download Now option below and got another screen with link to DS/Poser version. I just tested it in my DS 4.6.3 and made a render, all works nicely for me.

  Post edited by MilosGulan on June 2014
• Faeryl Womyn Posts: 3,278

  June 2014 edited December 1969

  And is working now for me.
• MilosGulan Posts: 1,950

  June 2014 edited December 1969

  Glad to hear that :)
  http://www.daz3d.com/daily-freebie/automotive-supplies
• MilosGulan Posts: 1,950

  June 2014 edited December 1969

  http://www.daz3d.com/daily-freebie/action-kicker-boots
• MilosGulan Posts: 1,950

  June 2014 edited December 1969

  http://www.daz3d.com/daily-freebie/the-construction-site
  http://www.daz3d.com/daily-freebie/crossbows
• Tramp Graphics Posts: 2,404

  June 2014 edited December 1969

  Diner Food 5
• MilosGulan Posts: 1,950

  June 2014 edited December 1969

  http://www.daz3d.com/daily-freebie/fountain-of-health
• MilosGulan Posts: 1,950

  June 2014 edited December 1969

  http://www.daz3d.com/daily-freebie/bucket-list
• MilosGulan Posts: 1,950

  June 2014 edited December 1969

  Steampunk Texture Add on for Steam Truck Armor
  http://www.contentparadise.com/productDetails.aspx?id=24844
• MilosGulan Posts: 1,950

  June 2014 edited December 1969

  http://www.daz3d.com/grenade-bundle
• Drachengeifer Posts: 1

  June 2014 edited December 1969

  So what happened to the DAILY Freebies promotion?
• Faeryl Womyn Posts: 3,278

  June 2014 edited December 1969

  The daily freebies were for one month, middle of May to middle of June and the time is up. I have no idea if they will doing something else with regards to freebies.
• MilosGulan Posts: 1,950

  June 2014 edited December 1969

  It was magical while it lasted, i hope i will make some nice renders with them, soon.
• cecilia.robinson Posts: 2,208

  June 2014 edited December 1969

  gulan7 said:

  It was magical while it lasted, i hope i will make some nice renders with them, soon.

  BACK TO SCHOOL, GUYS!

  But it's free :coolgrin:...

  http://www.daz3d.com/using-auto-fit-michael-4-to-genesis-2-male
  http://www.daz3d.com/using-auto-fit-victoria-4-to-genesis-2-female
  http://www.daz3d.com/basicwear-for-m4
  http://www.daz3d.com/basicwear-for-v4-unimesh
• ModernWizard Posts: 850

  June 2014 edited December 1969

  Hivewire3D has a Canada Goose figure by Ken Gilliland of Songbird ReMix for a time-limited freebie right now. Watch out -- it might bite other characters in your runtime. :p

  --MW
• teriperkins_bfd4324187 Posts: 206

  June 2014 edited December 1969

  The Canada Goose link does not work. Is it an old link?
• Daniel Barnett Posts: 389

  June 2014 edited December 1969

  Just go to www.hivewire3d.com and look at Store 1st page and scroll until you find it!!
• zawarkal Posts: 1,018

  June 2014 edited December 1969

  dbbdaniel said:

  Just go to www.hivewire3d.com and look at Store 1st page and scroll until you find it!!

  I could not find it. Is it over?

  I also searched on Canada goose
• Daniel Barnett Posts: 389

  June 2014 edited December 1969

  Zawarkal said:

  dbbdaniel said:

  Just go to www.hivewire3d.com and look at Store 1st page and scroll until you find it!!

  I could not find it. Is it over?

  I also searched on Canada goose

  I got it but it must be over!!