GENERAL FREEBIE REQUESTS part 3

Comments

• tkdrobert Posts: 3,639

  June 2020

  tkdrobert said:

  Anyone found a model of thr Razorcrest from the Mandalorian Disney+ series?

  Never mind.  Someone is working on it. YAHHH!!!
• DoctorJellybean Posts: 10,150

  June 2020

  I'm after the exterior of an old apartment building. and a door which can open\close would be a bonus. When I say old, I mean one that would match Stonemason's Urban Sprawl 3.
• Hylas Posts: 5,339

  June 2020

  DoctorJellybean said:

  I'm after the exterior of an old apartment building. and a door which can open\close would be a bonus. When I say old, I mean one that would match Stonemason's Urban Sprawl 3.

  https://www.sharecg.com/v/26105/poser/Mega-City---Block-1

  no opening doors though...
• lana_lass Posts: 520

  July 2020 edited July 2020

  So my request has been partially aided by that of @doctorjellybean and the response by @hylas (thank you both!), but can anyone point me in the direction of some sci-fi street props? Bonus points for dystopian Blader-runneresque things but anything would be much appreciated :)

   

  Somehow, despite spending in the Daz store like I am independently wealthy since November... consulted my bank account and it turns out I'm very much not??! So weird, right? So, I see myself becoming a freebie-section lurker for the foresable future   

  Post edited by lana_lass on July 2020
• Charlie Judge Posts: 13,638

  July 2020 edited July 2020

  So my request has been partially aided by that of @doctorjellybean and the response by @hylas (thank you both!), but can anyone point me in the direction of some sci-fi street props? Bonus points for dystopian Blader-runneresque things but anything would be much appreciated :)

   

  Somehow, despite spending in the Daz store like I am independently wealthy since November... consulted my bank account and it turns out I'm very much not??! So weird, right? So, I see myself becoming a freebie-section lurker for the foresable future   

  https://www.deviantart.com/sfman/art/Free-for-DAZ-Urban-Streets-Of-Tomorrow-by-sfman-723531345 (Note when you download be careful to get the correct download button and not the one for the ad)

  Not an actual 3d model but maybe you could use this free HDR: https://www.sharecg.com/v/74668/related/6/Texture/HDR-street-view-of-Dystopia

  Post edited by Charlie Judge on July 2020
• kyoto kid Posts: 42,440

  July 2020

  ..I've got that. relly nice set.
• DollyGirl Posts: 2,718

  July 2020

  lana_lass said:

  So my request has been partially aided by that of @doctorjellybean and the response by @hylas (thank you both!), but can anyone point me in the direction of some sci-fi street props? Bonus points for dystopian Blader-runneresque things but anything would be much appreciated :)

   

  Somehow, despite spending in the Daz store like I am independently wealthy since November... consulted my bank account and it turns out I'm very much not??! So weird, right? So, I see myself becoming a freebie-section lurker for the foresable future   

  Stonemason has a couple of items for the dystopian look: https://poserdazfreebies.miraheze.org/wiki/Freebies_previously_hosted_at_stefan-morrell.com

  Moebius87 created the Dystopian Console Station that used to be here https://poserdazfreebies.miraheze.org/wiki/Dystopian_Console_Station

  More: https://www.renderosity.com/mod/freestuff/dystopia-props/76976 and https://www.renderosity.com/mod/freestuff/dystopia-props-2/76983 and https://www.renderosity.com/mod/freestuff/bannerframe-and-posterframe/52896

  and lastly Herminio has some https://www.sharecg.com/herminio
• lana_lass Posts: 520

  July 2020

  WOW what an awesome response to my little request! Thank you so much @DollyGirl and @CharlieJudge! I appreciate it so much 

   

  So is SFMan who made Urban Streets of Tomorrow actually a cannonised saint?! Because if not I'm gonna write a letter to the Pope because they should be! Imagine putting YEARS of work into creating a huge, detailed sci-fi environment like that and then giving it away FOR FREE! What an excellent human being  

   

   
• DollyGirl Posts: 2,718

  July 2020

  Your welcome lana_lass. Glad to help.
• manekiNeko Posts: 1,456

  July 2020

  so, not sure if this has been requested here already because the search function isn't exactly brilliant, and this thread is 14 pages long... but i would love someone to bits for creating

  an adam's apple morph for G3M

  just that, 1 single little morph, nothing else.

  i know there are a few morph packs in the shop and probably somewhere else containing this, but i really don't need all the other morphs and things in those products, i already have enough morphs for G3M, i'm satisfied with what i own, and besides i have absolutely no cash for those items...

  pulleeeez?
• fixmypcmike Posts: 19,728

  July 2020

  Two things I've been looking for, free or modest cost:

  1) A medieval wheelchair.  The only pictures I can find before the 18th century are the three in this image:

  http://abilitytools.org/blog/wp-content/uploads/2013/10/earliest-wheelchairs.jpg

  I don't need historical authenticity, just something that won't look out of place next to the usual medieval carts and wagons.

  2) A gash down the left cheek, both as a fresh dripping gash and a healed scar.  My attempts to make them have been embarrassingly bad, and with all the sets of scars and such I've collected I haven't managed to find a matched set.
• Charlie Judge Posts: 13,638

  July 2020

  Fixmypcmike said:

  Two things I've been looking for, free or modest cost:

  1) A medieval wheelchair.  The only pictures I can find before the 18th century are the three in this image:

  http://abilitytools.org/blog/wp-content/uploads/2013/10/earliest-wheelchairs.jpg

  I don't need historical authenticity, just something that won't look out of place next to the usual medieval carts and wagons.

  Could you adapt this by maybe hiding the front pole: https://www.cgtrader.com/3d-models/vehicle/other/chariot-70960c95-d69b-4a2c-883b-26c4eab54e04
• Hylas Posts: 5,339

  July 2020

  manekiNeko said:

  an adam's apple morph for G3M

  SickleYield's free morphs include an Adam's Apple, but it's for G8... I don't know how much you mess with transferring morphs across generations

  https://sharecg.com/v/91888/gallery/21/DAZ-Studio/SY-200-Morphs-for-Genesis-8-Head-and-Body
• fixmypcmike Posts: 19,728

  July 2020

  Charlie Judge said:

  Fixmypcmike said:

  Two things I've been looking for, free or modest cost:

  1) A medieval wheelchair.  The only pictures I can find before the 18th century are the three in this image:

  http://abilitytools.org/blog/wp-content/uploads/2013/10/earliest-wheelchairs.jpg

  I don't need historical authenticity, just something that won't look out of place next to the usual medieval carts and wagons.

  Could you adapt this by maybe hiding the front pole: https://www.cgtrader.com/3d-models/vehicle/other/chariot-70960c95-d69b-4a2c-883b-26c4eab54e04

  Not quite what I'm looking for, but I might be able to make it work.  I was thinking of wood construction and small enough that the occupant could push himself for short distances.
• manekiNeko Posts: 1,456

  July 2020

  Hylas said:

  manekiNeko said:

  an adam's apple morph for G3M

  SickleYield's free morphs include an Adam's Apple, but it's for G8... I don't know how much you mess with transferring morphs across generations

  https://sharecg.com/v/91888/gallery/21/DAZ-Studio/SY-200-Morphs-for-Genesis-8-Head-and-Body

  thank you @Hylas , but actually i already got those SY morphs a while ago, as well as the "official" daz G8M morphs..

  and i have absolutely no idea/experience with transferring morphs - i bought genX years ago, was totally not able to use it, i get confuzzled very easily - and besides, my modeling experience is from school (cinema4d) and very poor/forgotten. short, i'm stupid-ish sometimes, or scared to even try because i have no clue what i'm doing. sometimes it works,like  i made a M4 with V4 UV or sth years ago, and if i open a duf/cr2 etc file in notepad++ i might even be able to correct stuff.. it depends, my skills are pretty random XD
• Kerya Posts: 10,943

  July 2020

  Fixmypcmike said:

  Two things I've been looking for, free or modest cost:

  1) A medieval wheelchair.  The only pictures I can find before the 18th century are the three in this image:

  http://abilitytools.org/blog/wp-content/uploads/2013/10/earliest-wheelchairs.jpg

  I don't need historical authenticity, just something that won't look out of place next to the usual medieval carts and wagons.

  2) A gash down the left cheek, both as a fresh dripping gash and a healed scar.  My attempts to make them have been embarrassingly bad, and with all the sets of scars and such I've collected I haven't managed to find a matched set.

   

  https://www.sharecg.com/v/23677/

  https://www.sharecg.com/v/78219/

  Maybe use wooden textures?
• fixmypcmike Posts: 19,728

  July 2020

  Kerya said:

  Fixmypcmike said:

  Two things I've been looking for, free or modest cost:

  1) A medieval wheelchair.  The only pictures I can find before the 18th century are the three in this image:

  http://abilitytools.org/blog/wp-content/uploads/2013/10/earliest-wheelchairs.jpg

  I don't need historical authenticity, just something that won't look out of place next to the usual medieval carts and wagons.

  2) A gash down the left cheek, both as a fresh dripping gash and a healed scar.  My attempts to make them have been embarrassingly bad, and with all the sets of scars and such I've collected I haven't managed to find a matched set.

   

  https://www.sharecg.com/v/23677/

  https://www.sharecg.com/v/78219/

  Maybe use wooden textures?

  That looks doable, thanks!
• manekiNeko Posts: 1,456

  July 2020 edited July 2020

  manekiNeko said:

  so, not sure if this has been requested here already because the search function isn't exactly brilliant, and this thread is 14 pages long... but i would love someone to bits for creating

  an adam's apple morph for G3M

  just that, 1 single little morph, nothing else.

  i know there are a few morph packs in the shop and probably somewhere else containing this, but i really don't need all the other morphs and things in those products, i already have enough morphs for G3M, i'm satisfied with what i own, and besides i have absolutely no cash for those items...

  pulleeeez?

  so, quoting myself hahaha..

  thought of something watching today's sales. i have meshgrabber on my wishlist anyways. waiting for "the right moment" to buy it *cough*... 
  let's say i manage to imitate an adam's apple by pulling out the neck's skin/vertices of a base G3M - IF i manage, cuz as i said, my modeling days... - can i actually "bake" that as a morph that will have a nice dial for G3M, ANY G3M, since i don't wanna play grabs every single time i use a G3M?

  EDIT: solved - this has been answered elsewhere (and it's NO)

  Post edited by manekiNeko on July 2020
• Cenobite Posts: 206

  July 2020 edited July 2020

  Weapon's of any kind are always a nice present for me, also anything Sci Fi or Futuristic i'm working on a space game and i'd like some usefull content, anything from Star Vessels, to parts i can kitebash onto new models, unless the textures are something special i would also prefer Iray shaders because they are more useful then one or two sets of textures.

  I find once you have a pro pack of the generations male and female you don't need extra people, i don't really need more body types as i can reshape everything with all the add on's i bought, if i can make a suggestion if you are going to add new models can you replicate famous people if thats possible otherwise i can just randomly make a new model from scratch with all the content i already own.

  i'll also add New Hair styles are always handy for freebies.

  Post edited by Cenobite on July 2020
• nicolethornmuggins Posts: 0

  July 2020

  Hi there,

  does anybody know where I can get an oil wrestling ring and maybe a mud wrestling pit?

   

   
• fixmypcmike Posts: 19,728

  July 2020

  ISTR a script at some point to batch-convert transforms on the root of a figure to the hip -- does anyone know where it might be?

  I'm also looking for a way to batch-convert hierarchical poses to regular poses.
• Catherine3678ab Posts: 8,556

  July 2020 edited August 2020

  andolaurina said:

  I'm looking for a morph for Genesis 3/8 Male and Female to remove the nostril holes so I can get a manga/anime look for a character. Anyone know where I can find this? If it's only available in a paid package, I'm fine with that. I do have Sakura 8 and that has an option remove nostrils but it doesn't work on plain Genesis 8, so that's out. Ideas?

  Thought I had one out for G8F but it may be one I pulled for lack of interest.

  https://www.daz3d.com/forums/discussion/360941/close-nostrils-little-morph-for-g8f

  edited to update.

  Post edited by Catherine3678ab on August 2020
• Hylas Posts: 5,339

  July 2020

  nicolethornmuggins said:

  Hi there,

  does anybody know where I can get an oil wrestling ring and maybe a mud wrestling pit?

   

   

  Not specific to mud or oil, but perhaps this helps:

  http://www.sharecg.com/v/30946/browse/11/Poser/Wrestling-Ring

  https://www.sharecg.com/v/58236/browse/21/DAZ-Studio/MMA-Cage
• andolaurina Posts: 676

  July 2020

  Any idea where there's a free sewing machine? Thank you.
• Charlie Judge Posts: 13,638

  July 2020

  andolaurina said:

  Any idea where there's a free sewing machine? Thank you.

  https://www.renderosity.com/mod/freestuff/?item_id=7093

  https://www.renderosity.com/mod/freestuff/sewing-machine-sewing-machine/78151

  https://www.renderosity.com/mod/freestuff/?item_id=36783

  https://www.renderosity.com/mod/freestuff/?item_id=9632

  https://www.renderosity.com/mod/freestuff/?item_id=10310

  https://www.renderosity.com/mod/freestuff/?item_id=73027

   
• lana_lass Posts: 520

  July 2020

  Other than the cybernetic implant over at Rendo which requires Victoria 4.2 Boydsuit Expansion, are there any sci-fi/android/Borg occular/cybernetic implant freebies? 

   

  I might buy Jennica next Lyoness sale because her one looks great, but in case there's an alternative that can save me some pennies (I love pennies)
• Charlie Judge Posts: 13,638

  July 2020 edited July 2020

  lana_lass said:

  Other than the cybernetic implant over at Rendo which requires Victoria 4.2 Boydsuit Expansion, are there any sci-fi/android/Borg occular/cybernetic implant freebies? 

   

  I might buy Jennica next Lyoness sale because her one looks great, but in case there's an alternative that can save me some pennies (I love pennies)

  https://www.renderosity.com/mod/freestuff/borg-implant/77544

  https://www.sharecg.com/v/37915/browse/11/Poser/M4-Eyepiece

  Edit To Add: This is currently on sale  in Fast Grab: https://www.daz3d.com/borg-for-genesis-8-female-s

  Post edited by Charlie Judge on July 2020
• lana_lass Posts: 520

  July 2020

  Charlie Judge said:

  lana_lass said:

  Other than the cybernetic implant over at Rendo which requires Victoria 4.2 Boydsuit Expansion, are there any sci-fi/android/Borg occular/cybernetic implant freebies? 

   

  I might buy Jennica next Lyoness sale because her one looks great, but in case there's an alternative that can save me some pennies (I love pennies)

  https://www.renderosity.com/mod/freestuff/borg-implant/77544

  https://www.sharecg.com/v/37915/browse/11/Poser/M4-Eyepiece

  Edit To Add: This is currently on sale  in Fast Grab: https://www.daz3d.com/borg-for-genesis-8-female-s

   

  

   

  Thanks, Charlie!!
• newjroe Posts: 13

  July 2020

  Looking for a Daphne Blake (Scooby-Doo) outfit for g8f. 
• Richard Haseltine Posts: 111,650

  July 2020

  newjroe said:

  Looking for a Daphne Blake (Scooby-Doo) outfit for g8f. 

  You might want to look here, though I don't think there were many - if any - freebies mentioned https://www.daz3d.com/forums/discussion/425336/scooby-daphne-outfit#latest