Loading...
> >

Live In Store Now! - Ivy Scatters for Ultrascatter 2 (Commercial)

MartinjfrostMartinjfrost Posts: 407
in Daz PA Commercial Products

This bundle of low res Ivy foliage is intended for use in Ultrascatter 2 - there are both plants and ready made ultrascatter scene subsets which can be added to your scene and applied as a scatter on most objects - depending on how the object has been constructed and uv mapped will depend on how well the scatter works. 

Althought not infallable this adds a quick way to  cover many objects or parts of them in ivy - other plants will follow watch my store for them. 

FIND IT HERE

THe included scene subsets are applied to an object by parenting the ultrascatter 2 instance sets they contain to the object you wish to scatter them on ( dont parent the actual plants containnded in the subset). Once this is done they should show up in the ultrascatter 2 window for that object and can be adjusted according to your desires. 

Insturctions below. 

Comments

  • ArtiniArtini Posts: 10,288

    Does it works in UltraScatter2 Pro?

     

  • MartinjfrostMartinjfrost Posts: 407
    edited July 29

    Artini said:

    Does it works in UltraScatter2

     

     Pro? the link to the version of ultrascatter  it works with is in the product page. It will NOT work with ultrascatter  or ultrascatter pro. 

     

    Post edited by Martinjfrost on
  • felisfelis Posts: 5,727

    @Martinjfrost have you seen in the Ultrascatter Pro thread that Ultrascatter Pro under certain conditions crashes Daz Studio?

  • MartinjfrostMartinjfrost Posts: 407

    felis said:

    @Martinjfrost have you seen in the Ultrascatter Pro thread that Ultrascatter Pro under certain conditions crashes Daz Studio?

    I am aware that there are crashes sometimes,. but these have been quite well tested and should be ok, as with everything to do with scattered objects, its always best to use the fewest possible instancees that helps avoid freeze ups and crashes.  

  • Richard HaseltineRichard Haseltine Posts: 107,883

    Martinjfrost said:

    felis said:

    @Martinjfrost have you seen in the Ultrascatter Pro thread that Ultrascatter Pro under certain conditions crashes Daz Studio?

    I am aware that there are crashes sometimes,. but these have been quite well tested and should be ok, as with everything to do with scattered objects, its always best to use the fewest possible instancees that helps avoid freeze ups and crashes.  

    The issue is that importing Victoria 4.2, and possibly other ExP figues, crashes DS if Ultra Scatter 2 is installed. This has been posted to the US 2 thread.

  • MartinjfrostMartinjfrost Posts: 407

    Richard Haseltine said:

    Martinjfrost said:

    felis said:

    @Martinjfrost have you seen in the Ultrascatter Pro thread that Ultrascatter Pro under certain conditions crashes Daz Studio?

    I am aware that there are crashes sometimes,. but these have been quite well tested and should be ok, as with everything to do with scattered objects, its always best to use the fewest possible instancees that helps avoid freeze ups and crashes.  

    The issue is that importing Victoria 4.2, and possibly other ExP figues, crashes DS if Ultra Scatter 2 is installed. This has been posted to the US 2 thread.

    Good to know as general info, this product wont be affected by that (unless you do import v2 ) as it has no relation ship to those things.    

  • Richard HaseltineRichard Haseltine Posts: 107,883

    Martinjfrost said:

    Richard Haseltine said:

    Martinjfrost said:

    felis said:

    @Martinjfrost have you seen in the Ultrascatter Pro thread that Ultrascatter Pro under certain conditions crashes Daz Studio?

    I am aware that there are crashes sometimes,. but these have been quite well tested and should be ok, as with everything to do with scattered objects, its always best to use the fewest possible instancees that helps avoid freeze ups and crashes.  

    The issue is that importing Victoria 4.2, and possibly other ExP figues, crashes DS if Ultra Scatter 2 is installed. This has been posted to the US 2 thread.

    Good to know as general info, this product wont be affected by that (unless you do import v2 ) as it has no relation ship to those things.    

    I guess the hope was that you would make sure Howie was aware of the issue, since it is with the plug-in not content like yours.

  • ArtiniArtini Posts: 10,288

    Martinjfrost said:

    Artini said:

    Does it works in UltraScatter2

     

     Pro? the link to the version of ultrascatter  it works with is in the product page. It will NOT work with ultrascatter  or ultrascatter pro. 

     

    Thanks. My bad, I was thinking about UltraScatter2.

     

  • HowieFarkesHowieFarkes Posts: 624
    edited August 22

    Richard Haseltine said:

    Martinjfrost said:

    felis said:

    @Martinjfrost have you seen in the Ultrascatter Pro thread that Ultrascatter Pro under certain conditions crashes Daz Studio?

    I am aware that there are crashes sometimes,. but these have been quite well tested and should be ok, as with everything to do with scattered objects, its always best to use the fewest possible instancees that helps avoid freeze ups and crashes.  

    The issue is that importing Victoria 4.2, and possibly other ExP figues, crashes DS if Ultra Scatter 2 is installed. This has been posted to the US 2 thread.

    An update for UltraScatter2 (v2.0.0.19) that fixes this problem should be available for download now.

    Post edited by HowieFarkes on
  • WendyLuvsCatzWendyLuvsCatz Posts: 40,010

    HowieFarkes said:

    Richard Haseltine said:

    Martinjfrost said:

    felis said:

    @Martinjfrost have you seen in the Ultrascatter Pro thread that Ultrascatter Pro under certain conditions crashes Daz Studio?

    I am aware that there are crashes sometimes,. but these have been quite well tested and should be ok, as with everything to do with scattered objects, its always best to use the fewest possible instancees that helps avoid freeze ups and crashes.  

    The issue is that importing Victoria 4.2, and possibly other ExP figues, crashes DS if Ultra Scatter 2 is installed. This has been posted to the US 2 thread.

    An update for UltraScatter2 (v2.0.0.19) that fixes this problem should be available for download now.

    I might eventually buy it now yes 

    I do use Ultrascatter 1 quite a lot but also use V4 quite a lot and when I saw this issue mentioned I held off wink

  • felisfelis Posts: 5,727

    HowieFarkes said:

    Richard Haseltine said:

    Martinjfrost said:

    felis said:

    @Martinjfrost have you seen in the Ultrascatter Pro thread that Ultrascatter Pro under certain conditions crashes Daz Studio?

    I am aware that there are crashes sometimes,. but these have been quite well tested and should be ok, as with everything to do with scattered objects, its always best to use the fewest possible instancees that helps avoid freeze ups and crashes.  

    The issue is that importing Victoria 4.2, and possibly other ExP figues, crashes DS if Ultra Scatter 2 is installed. This has been posted to the US 2 thread.

    An update for UltraScatter2 (v2.0.0.19) that fixes this problem should be available for download now.

    Installed update, and confirmed not crashing Daz Studio when loading Victoria 4.2 smiley 

  • Richard HaseltineRichard Haseltine Posts: 107,883

    felis said:

    HowieFarkes said:

    Richard Haseltine said:

    Martinjfrost said:

    felis said:

    @Martinjfrost have you seen in the Ultrascatter Pro thread that Ultrascatter Pro under certain conditions crashes Daz Studio?

    I am aware that there are crashes sometimes,. but these have been quite well tested and should be ok, as with everything to do with scattered objects, its always best to use the fewest possible instancees that helps avoid freeze ups and crashes.  

    The issue is that importing Victoria 4.2, and possibly other ExP figues, crashes DS if Ultra Scatter 2 is installed. This has been posted to the US 2 thread.

    An update for UltraScatter2 (v2.0.0.19) that fixes this problem should be available for download now.

    Installed update, and confirmed not crashing Daz Studio when loading Victoria 4.2 smiley 

    Thank you for the update, and for the confirmation that it works.

Sign In or Register to comment.