need a specific, Japanese club

Does anyone know where I can grab one of these? It has to have the flat sides.

 

Comments

  • CybersoxCybersox Posts: 6,591

    Does anyone know where I can grab one of these? It has to have the flat sides.

     

    Was there supposed to be an image there?  

  • TheKDTheKD Posts: 1,439

    Yeah, image is broked here too

  • WillowRavenWillowRaven Posts: 2,847
    edited December 5

    I'll attach it .rather than copy/paste it. (can also be octagonal)

    shape - 2_pOMTAg.jpg
    1920 x 1080 - 106K
    Post edited by WillowRaven on
  • WendyLuvsCatzWendyLuvsCatz Posts: 22,602

    find it amusing that without the image the next poster assumed a nightclub laugh

    I of course assumed the type Chohole wields as couldn's see how a room could be anything but flat sided surprise

  • https://www.daz3d.com/bludgeon-weapons This is close, it doesn't have spikes, but is similar. I thought for sure I'd seen a spiked club somewhere.... I'll look somemore.

  • CybersoxCybersox Posts: 6,591

    I'll attach it .rather than copy/paste it. (can also be octagonal)

    That's a tetsubo.  There's also a longer version called a kanabo and an older version called an ararebo.  There' are a couple on Turbo Squid, but they're crazy expensive.

  • How's this? An Iray render, but I finessed a 3DL version too.

    https://sharecg.com/v/94882/view/21/DAZ-Studio/Tetsubo

    Tetsubo.png
    773 x 1000 - 291K
  • CybersoxCybersox Posts: 6,591

    How's this? An Iray render, but I finessed a 3DL version too.

    https://sharecg.com/v/94882/view/21/DAZ-Studio/Tetsubo

    Dang.  I didn't even know I needed one of these until now. :)  Awesome work.

  • IvyIvy Posts: 5,599
    edited December 5

    you could always try to make a club of your choice. Age of Armour has a great kit called "stage hand" for just that type of scene. you can custom build OR move walls and props change the colors to anything you like and it 50% off right now

    https://www.daz3d.com/stage-hand-building-set-and-scene-suite-34555

    Post edited by Ivy on
  • zombietaggerungzombietaggerung Posts: 1,877
    edited December 5

    Here's a quicky render to show the scale of my above Tetsubo prop.

    Tetsubo scale render.png
    927 x 1500 - 1M
    Post edited by zombietaggerung on
  • https://www.daz3d.com/oni-demon-for-genesis-8-male-s

    I seem to recall Tetsubo being the traditional weapon of Oni...

  • TheKDTheKD Posts: 1,439

     

    Ivy said:

    you could always try to make a club of your choice.

    Would love to see someone attempts to weild that kind of club :P

  • WillowRavenWillowRaven Posts: 2,847

    I'll attach it .rather than copy/paste it.. 

    How's this? An Iray render, but I finessed a 3DL version too.

    https://sharecg.com/v/94882/view/21/DAZ-Studio/Tetsubo

    That's perfect! Did you make that just for this? I'll try to remember to show ya'll my render when it's finished.

    I seem to recall Tetsubo being the traditional weapon of Oni...

    As a matter of fact, I am creating an Oni character and scene for a book cover, but she looks nothing like that guy, lol. It's for an erotica fantasy novel.

  • sapatsapat Posts: 1,703

    How's this? An Iray render, but I finessed a 3DL version too.

    https://sharecg.com/v/94882/view/21/DAZ-Studio/Tetsubo

    Wow, this is an amazing weapon!! Thank you so much. I def wouldn't want to be the ball on the end of that bat.

  • SpottedKittySpottedKitty Posts: 6,542

    I have one of those as a Poser prop freebie, but I can't remember now where I got it. Might have been renderosity.

    I found the original installer, it's by TheAestheticDemon (not sure if he's an active content creator any more) and... hmm, the tetsubo isn't in his archives on ShareCG or DeviantArt. Maybe I got it somewhere else.

  • I'll attach it .rather than copy/paste it.. 

    How's this? An Iray render, but I finessed a 3DL version too.

    https://sharecg.com/v/94882/view/21/DAZ-Studio/Tetsubo

    That's perfect! Did you make that just for this? I'll try to remember to show ya'll my render when it's finished.

    I seem to recall Tetsubo being the traditional weapon of Oni...

    As a matter of fact, I am creating an Oni character and scene for a book cover, but she looks nothing like that guy, lol. It's for an erotica fantasy novel.

    I sorta did, I got frustrated cause I couldn't find the one I'd thought for sure I'd seen somewhere, so i just made it. I'm glad it works out for you and I hope the book cover turns out great. laugh

  • SixDsSixDs Posts: 2,183

    The generous zombietaggerung has addressed the issue, but there actually is one in the store as part of:

    https://www.daz3d.com/maces-and-cudgels

  • SixDs said:

    The generous zombietaggerung has addressed the issue, but there actually is one in the store as part of:

    https://www.daz3d.com/maces-and-cudgels

    I KNEW i'D SEEN ONE SOMEWHERE!

  • WillowRavenWillowRaven Posts: 2,847
    SixDs said:

    The generous zombietaggerung has addressed the issue, but there actually is one in the store as part of:

    https://www.daz3d.com/maces-and-cudgels

    I bought that, too, lol (I have waaay too much stuff) ... but for this story, the spikes work better, anyway :)

  • CybersoxCybersox Posts: 6,591
    SixDs said:

    The generous zombietaggerung has addressed the issue, but there actually is one in the store as part of:

    https://www.daz3d.com/maces-and-cudgels

    Just another reason why it would be really nice to have an itemized library of everything that's in the ##@@* store... I have that set and totally forgot about it, although the photo shown did have spikes rather than the studs in the DAZ version.

  • DaremoK3DaremoK3 Posts: 607

    Great job, zombietaggerung - It looks fit for Oni, or Samurai alike.

     

    SpottedKitty :

    Maybe the one from Dodger back in the Poser4 days - It was one of the first ones I ever came across in his Asain Polearms set when I was creating my own.

     

    I also have the one listed by SixDs - I did not remember I had that set.  Thanks for adding it and the reminder, SixDs.

  • WillowRavenWillowRaven Posts: 2,847

    I'm doing something wrong but can't figure out what ...

    club error 1.jpg
    1366 x 768 - 89K
    club error 2.jpg
    1366 x 768 - 88K
    club error 3.jpg
    1366 x 768 - 106K
  • hmmmm, I'll check the zip. Hang on.

  • zombietaggerungzombietaggerung Posts: 1,877
    edited December 6

    Sorry about that. Try redownloading it. 

    Clean install by deleting [data -- GMS Props -- Tetsubo], [Props -- GMS Props -- Tetsubo], and [Runtime -- Textures -- GMS Props -- Tetsubo] 

    Then reinstall it.

    Post edited by zombietaggerung on
  • jardinejardine Posts: 762

    that's a really nice tetsubo, zombietaggerung

    thanks.  i reckon you've just made a lot of 3D oni really happy.  me, too.

    :)

    j

  • Glad to help, and sorry again for the error in the zip. It's all good now.

  • memcneil70memcneil70 Posts: 120

    I downloaded today, so, I should have a good file, correct? 

    May I say how much I appreciate this? I do renders for authors with very broad interests.

  • WillowRavenWillowRaven Posts: 2,847

    I downloaded today, so, I should have a good file, correct? 

    May I say how much I appreciate this? I do renders for authors with very broad interests.

    Yes, it's working now. 

  • WillowRavenWillowRaven Posts: 2,847

    I'd like to add some wrapping and a dangly, posable ribbon hanging from the loop (leftover ribbon from the wrapping). What's the fastest way ya'll can think of to do that?

Sign In or Register to comment.