GENERAL FREEBIE REQUESTS Part 2

19192949697100

Comments

  • kyoto kidkyoto kid Posts: 31,609
    kyoto kid said:

    ...thank you. I'll post the rendered scene.

    Glad to help - looking forward to it :)

    ...OK here's the scene (still a WIP as I'm messing with skin shaders) but with the cart (which looks great) could add character behind the girls in.

     

    Bus stop with shopper lady.jpg
    1500 x 1125 - 1M
  • I'd like to request, is there a Cosplay version of April O'Neil from the TMNT franchise available for free download?

  • kyoto kid said:
    kyoto kid said:

    ...thank you. I'll post the rendered scene.

    Glad to help - looking forward to it :)

    ...OK here's the scene (still a WIP as I'm messing with skin shaders) but with the cart (which looks great) could add character behind the girls in.

     

    Looking good :)

  • Hi,

    I'm looking for a freebie ultrasound machine. The kind that would typically be in a OBGYN office or used for other medical imaging.

    Thanks!

     

  • Beat578Beat578 Posts: 169
    JonSea31 said:

    I'd like to request, is there a Cosplay version of April O'Neil from the TMNT franchise available for free download?

    You mean the yellow Jumpsuit? Maby you could try and alter a Texture for the Supersuit. I work on a Jumpsuit of that kind for the G2F, but it's not that far yet. I could insert a yellow Texture for it, but it will at least be Mai until I can release it, as I have several other things to finish still...

  • Is the Supersuit free?

    Also, what hairstyle comes close to April O'Neil?

  • kyoto kidkyoto kid Posts: 31,609
    kyoto kid said:
    kyoto kid said:

    ...thank you. I'll post the rendered scene.

    Glad to help - looking forward to it :)

    ...OK here's the scene (still a WIP as I'm messing with skin shaders) but with the cart (which looks great) could add character behind the girls in.

     

    Looking good :)

    ..thank you. 

  • The SuperSuit is not free, but there are plenty of free bodysuits availiable for various figures.

    Might I suggest using the following jumpsuit (Genesis 1) instead, as it's already sculpted accordingly?

    https://www.sharecg.com/v/72044/gallery/21/DAZ-Studio/Ghastlys-Science-Jumpsuit-genesis-1

  • Thanks for the link.  This jumpsuit is pretty good.

    Now if only I could find out which hairstyle is pretty close to April O'Neil, even if I have to purchase it later on down the road.

  • I think I found a close-enough match to April O'Neil's hair.  It's Marja, which is for sale.

    Now, I'd like to ask if there are any freebies for The Girl (the original, not subsequent versions)?  I tried searching the Poser Daz Freebies Wiki, and found nothing for The Girl, except for The Girl 3.

  • Mythic3DMythic3D Posts: 1,488
    kimh said:
    MDO2010 said:

    ...I should have these both for you next weekend; I only get a few hours on the weekend to play with my 3D hobby and since we missed the holiday for this year, I figure there's no rush. wink...

    You are right...there is no rush. But the Brigid's cross looks wonderful. I actually got to make my very first Brigid's cross Friday night so I know exactly what you mean by forgetting on which side you started...lol

    @kimh - this is done and available on Sharecg (I created a separate thread for it here https://www.daz3d.com/forums/discussion/comment/3352351/#Comment_3352351).

  • Any pre-Genesis Uncle Sam top hats for free or cheap? The only thing I found was a texture for a hat for a Victoria 3 item that no longer seems to be available.

  • JonSea31 said:

    I think I found a close-enough match to April O'Neil's hair.  It's Marja, which is for sale.

    Now, I'd like to ask if there are any freebies for The Girl (the original, not subsequent versions)?  I tried searching the Poser Daz Freebies Wiki, and found nothing for The Girl, except for The Girl 3.

    The Girl 3 was the original Daz version.  It came with 'The Girl' and 'The Girl V3-UV' (for using V3 skins).  Freebies for 'The Girl' (no number) or "The Girl 3' should work with that version.  Try one - if it doesn't work, let me know so I can stop talking rubbish LOL.

  • DollyGirlDollyGirl Posts: 2,261

    Any pre-Genesis Uncle Sam top hats for free or cheap? The only thing I found was a texture for a hat for a Victoria 3 item that no longer seems to be available.

    http://www.most-digital-creations.com/free_poser_poses_textures_morphs_props_33.htm

    http://www.sharecg.com/v/31584/gallery/11/Poser/Steampunk-Gallon-Hat-Smart-Prop-V4

    http://www.renderosity.com/mod/freestuff/details.php?item_id=60933

  • Any pre-Genesis Uncle Sam top hats for free or cheap? The only thing I found was a texture for a hat for a Victoria 3 item that no longer seems to be available.

    There are some various ones for sale at Turbo: https://www.turbosquid.com/Search/Index.cfm?keyword=Uncle+Sam+Hat

  • Any pre-Genesis Uncle Sam top hats for free or cheap? The only thing I found was a texture for a hat for a Victoria 3 item that no longer seems to be available.

    There are some various ones for sale at Turbo: https://www.turbosquid.com/Search/Index.cfm?keyword=Uncle+Sam+Hat

    Thanks! I always forget about Turbo because the range of their prices is insane. But they do have one on sale for $3.50, so I may grab it if something else doesn't show up soon.

  • I just found a basic free Uncle Sam hat here: https://www.most-digital-creations.com/free_poser_poses_textures_morphs_props_33.htm

    I'm not crazy about its stars, but they would be easy to change.

  • I am having trouble tracking down a free script I came across I think last year.  The script converts Daz poses into Poser format and had a batch converter with it.  I can't seem to find it, does  anyone know where I can get it.

  • Does anyone know of an eye prop? Not an eyeball, but an actual eye. It doesn't need to be able to close, or have eyelases or a tear duct.
    I just need something that can be positioned on the forhead of a couple characters.

  • chris-2599934chris-2599934 Posts: 961
    edited February 2018

    I'm looking for a makeup bag, Vicky's about to set to with the https://www.daz3d.com/scandalous-makeup-set , but she needs a bag to keep it in when she's done. A small handbag or clutch purse would do.

    [Added: I've just found a clutch purse at https://www.wilmapsdigitalcreations.co.uk/view_product.php?id=180 which works with a bit of Z scaling, but I'm open to other suggestions]

    Post edited by chris-2599934 on
  • DollyGirlDollyGirl Posts: 2,261

    Does anyone know of an eye prop? Not an eyeball, but an actual eye. It doesn't need to be able to close, or have eyelases or a tear duct.
    I just need something that can be positioned on the forhead of a couple characters.

    http://freezone.thefantasiesattic.net/index.php?main_page=product_info&cPath=138_141&products_id=494

  • DollyGirl said:

    Does anyone know of an eye prop? Not an eyeball, but an actual eye. It doesn't need to be able to close, or have eyelases or a tear duct.
    I just need something that can be positioned on the forhead of a couple characters.

    http://freezone.thefantasiesattic.net/index.php?main_page=product_info&cPath=138_141&products_id=494

    Thanks, but that doesn't quite work for what I'm trying to do.
    In the case of the characters I'm working on, the eye is an actual part of them. It looks like a normal human eye, just set into the forehead - resulting in three eyes.

  • DollyGirl said:

    Does anyone know of an eye prop? Not an eyeball, but an actual eye. It doesn't need to be able to close, or have eyelases or a tear duct.
    I just need something that can be positioned on the forhead of a couple characters.

    http://freezone.thefantasiesattic.net/index.php?main_page=product_info&cPath=138_141&products_id=494

    Thanks, but that doesn't quite work for what I'm trying to do.
    In the case of the characters I'm working on, the eye is an actual part of them. It looks like a normal human eye, just set into the forehead - resulting in three eyes.

    The closesest one I know of is over at Rendo and is not free and round:

    https://www.renderosity.com/mod/bcs/third-eye/86997/

  • This one for Genesis is nice, and the vendor periodically has sales: https://www.daz3d.com/triclops

  • DollyGirl said:

    Does anyone know of an eye prop? Not an eyeball, but an actual eye. It doesn't need to be able to close, or have eyelases or a tear duct.
    I just need something that can be positioned on the forhead of a couple characters.

    http://freezone.thefantasiesattic.net/index.php?main_page=product_info&cPath=138_141&products_id=494

    Thanks, but that doesn't quite work for what I'm trying to do.
    In the case of the characters I'm working on, the eye is an actual part of them. It looks like a normal human eye, just set into the forehead - resulting in three eyes.

    The closesest one I know of is over at Rendo and is not free and round:

    https://www.renderosity.com/mod/bcs/third-eye/86997/

    Yeah, being round makes it unsuitable, thank you though.

    This one for Genesis is nice, and the vendor periodically has sales: https://www.daz3d.com/triclops

    Now this looks much more like what I need if the eye can be turned sideways that is. 
    For a different character of mine it's perfect though. Thank you.

  • tkdroberttkdrobert Posts: 2,476

    I would love a robotech light suit for A3/H3, M4/H4/V4/A4 or G1.

    Related image

     

    Also would love this captial ship.  I'm going to try and make it myself, but that may take awhile, because I have to learn Hexagon

    Image result for Robotech IKAZUCHI-CLASS CRUISER 3d models, obj, lwo?

    Image by Chiletrek - DeviantArt,

  • Mythic3DMythic3D Posts: 1,488
    tkdrobert said:

    ...Also would love this captial ship.  I'm going to try and make it myself, but that may take awhile, because I have to learn Hexagon

    ...

    That Robotech ship doesn't look too hard to make but for maximum ease you'd need some more orthographic views of it. You have a side view there; if you could find a straight on top view and a back or front view (or both in a perfect world) it would be pretty quick to make I'd bet. It's mostly pretty basic shapes so you wouldn't have to dive too deeply into Hexagon to figure it out.

  • tkdroberttkdrobert Posts: 2,476
    edited February 2018
    MDO2010 said:
    tkdrobert said:

    ...Also would love this captial ship.  I'm going to try and make it myself, but that may take awhile, because I have to learn Hexagon

    ...

    That Robotech ship doesn't look too hard to make but for maximum ease you'd need some more orthographic views of it. You have a side view there; if you could find a straight on top view and a back or front view (or both in a perfect world) it would be pretty quick to make I'd bet. It's mostly pretty basic shapes so you wouldn't have to dive too deeply into Hexagon to figure it out.

    I'm sure I can find those views somewhere.  We'll see if I have the time and patience to do it.  I think I can. 

    I'm a little worried about texturing.

    Post edited by tkdrobert on
  • Mythic3DMythic3D Posts: 1,488

    Yeah - depending on its real world size texturing might be a bit of a pain if you want a close-up view of it. If you're going to be seeing it mostly from a distance though you can probably get away with flat colors for different parts or simple tiling textures without a lot of detail. Honestly I wouldn't even worry about it from the start though.

    When modeling something like this the key is to break it into pieces and start by just getting the basic shapes/silhouette first, then go back in passes and slowly add detail as needed. Keep the added detail as separate pieces while modeling as much as you can because it will make unwrapping it easier when you get to that stage and if you make a mistake you don't have to totally start over - just fix that one piece (save often and save different versions as you go too). Think about how you're going to be using it too - you don't need as much detail for a ship that won't ever be close to the camera.

    I'd recommend starting a thread on it in the Hexagon forum once you get going - I'm sure people will be happy to help you out with anything you get stuck on.  laugh

  • tkdroberttkdrobert Posts: 2,476
    MDO2010 said:

    Yeah - depending on its real world size texturing might be a bit of a pain if you want a close-up view of it. If you're going to be seeing it mostly from a distance though you can probably get away with flat colors for different parts or simple tiling textures without a lot of detail. Honestly I wouldn't even worry about it from the start though.

    When modeling something like this the key is to break it into pieces and start by just getting the basic shapes/silhouette first, then go back in passes and slowly add detail as needed. Keep the added detail as separate pieces while modeling as much as you can because it will make unwrapping it easier when you get to that stage and if you make a mistake you don't have to totally start over - just fix that one piece (save often and save different versions as you go too). Think about how you're going to be using it too - you don't need as much detail for a ship that won't ever be close to the camera.

    I'd recommend starting a thread on it in the Hexagon forum once you get going - I'm sure people will be happy to help you out with anything you get stuck on.  laugh

    Good advise thanks.

This discussion has been closed.