Loading...
> >

Looking for 'fish man' morphs

michellecelebriellemichellecelebrielle Posts: 264
edited December 1969 in The Commons

I'd like to try and make my own Abe Sapien from Hellboy, but am having trouble finding any morphs or add-ons I can use to create him.What I reall need are the gills and webbed hands and feet. The morphs I've seen on Deep Aquatic for genesis and Gill Man aren't really what I'm looking for.
I found a morph for M3 on sharecg (http://www.sharecg.com/v/45046/View/11/Poser/Fish-Man-for-M3-Morphs) which would do for the head, but I am using Genesis, and I don't have M3. Is there any way I can convert him to Genesis if I buy the M3 body shape for genesis? Would I need M3 himself to be able to do so? I have GenX but it says it only works for generation 4 morphs.

abe.jpg
440 x 272 - 16K

Comments

  • JasmineSkunkJasmineSkunk Posts: 1,872
    edited November 2012

    I don't know much about Gen X, but I do know that with M3, you will need the GenX AddOn for M3, to transfer morphs. It's here:

    http://www.daz3d.com/shop/genx-addon-gen3-for-v3-and-m3

    but if you want to use Genesis, maybe this product would work? http://www.daz3d.com/shop/beasts-and-brutes

    Anyway....Good Luck! :)

    Post edited by JasmineSkunk on
  • michellecelebriellemichellecelebrielle Posts: 264
    edited December 1969

    JasmineSkunk said:
    I don't know much about Gen X, but I do know that with M3, you will need the GenX AddOn for M3, to transfer morphs. It's here:

    http://www.daz3d.com/shop/genx-addon-gen3-for-v3-and-m3

    but if you want to use Genesis, maybe this product would work? http://www.daz3d.com/shop/beasts-and-brutes

    Anyway....Good Luck! :)

    Ah, thank you! I didn't know they had a gen 3 add-on for genesis generation X, so that will be a big help. However, I'll still need to buy the M3 model so I can create and save the fish man morph and transfer via GenX... so much work for one morph *sigh*

  • JUJUJUJU Posts: 1,120
    edited December 1969

    Here is one for M4
    http://www.daz3d.com/shop/gillman
    I mean to remember one for genesis but I am not sure...
    I will search a little bit further

  • JUJUJUJU Posts: 1,120
    edited December 1969

    may be it was this was I have in mind
    http://www.daz3d.com/shop/from-the-deep-aquatic-genesis

  • JUJUJUJU Posts: 1,120
    edited December 1969

    Oh no, it was this
    http://www.daz3d.com/shop/creatures/sea-creatures/kuril

  • pwiecekpwiecek Posts: 1,538
    edited November 2012

    Juju said:
    may be it was this was I have in mind
    http://www.daz3d.com/shop/from-the-deep-aquatic-genesis
    Here is one for M4
    http://www.daz3d.com/shop/gillman
    I mean to remember one for genesis but I am not sure...
    I will search a little bit further

    I have been around the poser community for a long time and these are the ONLY webbed hands I have ever seen.

    Post edited by pwiecek on
  • JasmineSkunkJasmineSkunk Posts: 1,872
    edited December 1969

    mishwish said:
    JasmineSkunk said:
    I don't know much about Gen X, but I do know that with M3, you will need the GenX AddOn for M3, to transfer morphs. It's here:

    http://www.daz3d.com/shop/genx-addon-gen3-for-v3-and-m3

    but if you want to use Genesis, maybe this product would work? http://www.daz3d.com/shop/beasts-and-brutes

    Anyway....Good Luck! :)

    Ah, thank you! I didn't know they had a gen 3 add-on for genesis generation X, so that will be a big help. However, I'll still need to buy the M3 model so I can create and save the fish man morph and transfer via GenX... so much work for one morph *sigh*

    lol...well, good luck! Glad to help :)

  • Eustace ScrubbEustace Scrubb Posts: 2,687
    edited December 1969

    pwiecek said:
    Juju said:
    may be it was this was I have in mind
    http://www.daz3d.com/shop/from-the-deep-aquatic-genesis
    Here is one for M4
    http://www.daz3d.com/shop/gillman
    I mean to remember one for genesis but I am not sure...
    I will search a little bit further

    I have been around the poser community for a long time and these are the ONLY webbed hands I have ever seen.

    3DMenagerie has a lo-res one, but only as a rigging novelty. The thing is, though, that it WORKS. I hope someone can use its rig on a Genesis hand, or---¿dare I hope?---a dragon wing.

  • zawarkalzawarkal Posts: 1,018
    edited December 1969

    mishwish said:
    I'd like to try and make my own Abe Sapien from Hellboy, but am having trouble finding any morphs or add-ons I can use to create him.What I reall need are the gills and webbed hands and feet. The morphs I've seen on Deep Aquatic for genesis and Gill Man aren't really what I'm looking for.
    I found a morph for M3 on sharecg (http://www.sharecg.com/v/45046/View/11/Poser/Fish-Man-for-M3-Morphs) which would do for the head, but I am using Genesis, and I don't have M3. Is there any way I can convert him to Genesis if I buy the M3 body shape for genesis? Would I need M3 himself to be able to do so? I have GenX but it says it only works for generation 4 morphs.

    Just went looking for this morph, but is has been removed. Does anyone know where I might be able to find it or another similar free item such as this?

  • wancowwancow Posts: 2,708
    edited December 1969

    It may have been a copyright issue, which means it'll no longer be available.

  • zawarkalzawarkal Posts: 1,018
    edited December 1969

    wancow said:
    It may have been a copyright issue, which means it'll no longer be available.

    Yeah, I can understand that. But still interested if anyone knows of any similar free models.

  • JoeQuickJoeQuick Posts: 1,698
    edited December 1969

    wancow said:
    It may have been a copyright issue, which means it'll no longer be available.

    It was a "I made it nearly a decade ago and it's time to clean house" issue.

  • zawarkalzawarkal Posts: 1,018
    edited December 1969

    Joequick said:
    wancow said:
    It may have been a copyright issue, which means it'll no longer be available.

    It was a "I made it nearly a decade ago and it's time to clean house" issue.

    What a shame. There is still interest.

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    Zawarkal said:
    wancow said:
    It may have been a copyright issue, which means it'll no longer be available.

    Yeah, I can understand that. But still interested if anyone knows of any similar free models.

    This is a WIP.,.no idea of when I'll have it ready...

    abe.jpg
    800 x 1000 - 152K
  • zawarkalzawarkal Posts: 1,018
    edited December 1969

    mjc1016 said:
    Zawarkal said:
    wancow said:
    It may have been a copyright issue, which means it'll no longer be available.

    Yeah, I can understand that. But still interested if anyone knows of any similar free models.

    This is a WIP.,.no idea of when I'll have it ready...

    That's a very nice start!

  • mjc1016mjc1016 Posts: 15,001
    edited January 2013

    Here's a partial displacement map...

    I'm not going for a straight Abe clone...but I am working this one in parts, so things like the head can be used by itself. (It's for Genesis.)

    abe2.jpg
    800 x 1000 - 193K
    Post edited by mjc1016 on
  • JoeQuickJoeQuick Posts: 1,698
    edited December 1969

    mjc1016 said:
    Here's a partial displacement map...

    I'm not going for a straight Abe clone...but I am working this one in parts, so things like the head can be used by itself. (It's for Genesis.)

    Given that you pulled off a horse, I don't think that you'll have any problem with this.

  • michellecelebriellemichellecelebrielle Posts: 264
    edited December 1969

    mjc1016 said:
    Here's a partial displacement map...

    I'm not going for a straight Abe clone...but I am working this one in parts, so things like the head can be used by itself. (It's for Genesis.)

    Looks good. Sorry about not replying to this thread... I don't seem to get notifications from the forum

  • FirstBastionFirstBastion Posts: 7,325
    edited December 1969

    If you were using genesis you could use one of these creature head morphs: http://www.daz3d.com/genesis-creature-creator-heads

Sign In or Register to comment.