Loading...
> >

Any chance for Treadz for Genesis 2 & 3? (NOW IN THE STORE!)

13

Comments

  • shadowhawk1shadowhawk1 Posts: 2,211
    the3dwizard said:
    shadowhawk1 said:
    the3dwizard said:
    shadowhawk1 said:
    the3dwizard said:
    shadowhawk1 said:

    Are they here yet? 

     

    Are they here yet?? 

     

    ARE THEY HERE YET???? 

     

     

     

    If you don't behave I am going to pull this car over!  LOL

    The G2 set is done just started on G3.  While you waiting have a look at the Iray materials.

    Cheers!

     

     

    LOL .... HHHMMMMMM ... I may have heard that a time or two as a kid while travelling. Have you thought of a boot that is taller with the same heel morphs as the Treadz? Something that goes up to just below the knee? Bad Kitten made these for V4 a ways back but still a favorite of mine. I know its a little late for the Treadz but maybe a future set of boots or maybe a taller morph? I love the Treadz for heroine boots and it seems more reasonable to give them a taller heel when they aren't trying to balance on a point the size of a pencil. 

    There is a KneeHigh morph that goes up to almost to the knee.  You could run it past 100% and use the adjustment morphs for an even higher look.

     

    divamakeup said:
    the3dwizard said:
    shadowhawk1 said:

    Are they here yet? 

     

    Are they here yet?? 

     

    ARE THEY HERE YET???? 

     

     

     

    If you don't behave I am going to pull this car over!  LOL

    The G2 set is done just started on G3.  While you waiting have a look at the Iray materials.

    Cheers!

     

     

    Oh My Goodness! This looks fantastic! I wasn't aware the boots could be lower than the calf! I may never need to buy another pair of shoes ever again. *drool*
     

    Yep, this was a big change I did with the Genesis version.  You can also do a type of shoes, guess I will need to do a better job of marketing. wink

     

    OK I don't remember that being on the V4 version, if it already has it then please disregard, you are a step ahead of me there. I only have one more question for you. Do I just mail my credit card to you or will you take direct paypal deposits? laugh

    It wasn't in the V4 version, just the Genesis one and paypal is fine wink

     

     

    divamakeup said:
    the3dwizard said:
    shadowhawk1 said:
    the3dwizard said:
    shadowhawk1 said:

    Are they here yet? 

     

    Are they here yet?? 

     

    ARE THEY HERE YET???? 

     

     

     

    If you don't behave I am going to pull this car over!  LOL

    The G2 set is done just started on G3.  While you waiting have a look at the Iray materials.

    Cheers!

     

     

    LOL .... HHHMMMMMM ... I may have heard that a time or two as a kid while travelling. Have you thought of a boot that is taller with the same heel morphs as the Treadz? Something that goes up to just below the knee? Bad Kitten made these for V4 a ways back but still a favorite of mine. I know its a little late for the Treadz but maybe a future set of boots or maybe a taller morph? I love the Treadz for heroine boots and it seems more reasonable to give them a taller heel when they aren't trying to balance on a point the size of a pencil. 

    There is a KneeHigh morph that goes up to almost to the knee.  You could run it past 100% and use the adjustment morphs for an even higher look.

     

    divamakeup said:
    the3dwizard said:
    shadowhawk1 said:

    Are they here yet? 

     

    Are they here yet?? 

     

    ARE THEY HERE YET???? 

     

     

     

    If you don't behave I am going to pull this car over!  LOL

    The G2 set is done just started on G3.  While you waiting have a look at the Iray materials.

    Cheers!

     

     

    Oh My Goodness! This looks fantastic! I wasn't aware the boots could be lower than the calf! I may never need to buy another pair of shoes ever again. *drool*
     

    Yep, this was a big change I did with the Genesis version.  You can also do a type of shoes, guess I will need to do a better job of marketing. wink

     

    WHAA!? Oy - these are the most amazing boots I've ever seen here! One would literally never have to buy another pair of boots ..like ever. lol With this one boot it looks like (between mixing and matching the heel styles as well as the boot style/height) there are a crazy amount of possibilities to create wildly different boots. Mix in a few different shader options that take advantage of the MANY mat zones and it sounds like there are an insane amount of variations possible with this boot. I hope you're able to market it so that people can see how massively diverse these boots are! People are literally getting like a TON of different boots in one. 

    I do try to make things versatile.  There are also toe shaping morphs (see attached) and don't forget ForbiddenWhispers textures  smiley

     

    RCDeschene said:
    the3dwizard said:
    RCDeschene said:

    Oh boy! Let's see now...

    1. JeanZ for Genesis 3 (done)

    2. TreadZ for Genesis 3

    3. ShirtZ for Genesis 3

    4. Ultra Catsuit for Genesis 3

    Looks like you'll be busy for a while, 3d! XD

    That's only stuff you know about wink

    Jesus! What else are you doing? O_O

    Oh sure, I tell you, you tell someone else and the next thing you know, we're in the middle of another ice age. laugh

     

    So you want my bank account to scream instead huh? laugh I love the toe cap morph, Now I can't wait to get my hands on them!! I have to agree with Divamakeup, this has to be the single most morphable footwear I have seen! 

    Are they ready yet? 

  • the3dwizardthe3dwizard Posts: 495
    divamakeup said:

    @the3dwizard AND toe-shaping morphs!? *dies*

    You can totally market this as "The most versatile footwear you'll ever own". It sounds like you could mix and match and get 100's of different boots.

    I've never been this excited over the release of a wearable. These sound (and look) amazing! I can't wait!

    LOL that is funny.  That is almost what I wrote for the product page.  Glad you agree!

    "TreadZ have come to Genesis 2 Female and Males!  Perhaps the most versatile boots on the planet. Go from low heel to high heel to knee high with ease. With a few presets easily create work boots and hiking shoes from the same model. Lots of different heel/sole morphs from flats to wedges."

  • 3Diva3Diva Posts: 12,058
    the3dwizard said:
    divamakeup said:

    @the3dwizard AND toe-shaping morphs!? *dies*

    You can totally market this as "The most versatile footwear you'll ever own". It sounds like you could mix and match and get 100's of different boots.

    I've never been this excited over the release of a wearable. These sound (and look) amazing! I can't wait!

    LOL that is funny.  That is almost what I wrote for the product page.  Glad you agree!

    "TreadZ have come to Genesis 2 Female and Males!  Perhaps the most versatile boots on the planet. Go from low heel to high heel to knee high with ease. With a few presets easily create work boots and hiking shoes from the same model. Lots of different heel/sole morphs from flats to wedges."

    Ohhh I like that! :)

    So these are only for G2? Will there be a version for G3? :) (not that I mind, I'm sure autofit will work ok)

  • the3dwizardthe3dwizard Posts: 495

    I am finishing up a G3 version (male and female).  Autofit works okay and probably well enough for some people.  However the morphs (both character and joint control) don't always look right to me and the weight maps need work.  You can get some crunching of the mesh which is really noticable in the laces, buckles and straps where the foot bends.  Plus the toes never look right and smoothing won't take care of it.  When I do the conversion I adjust the model to fit the new figure then hand make the character morphs plus repaint the weight maps.  I think autofit can work well for some clothing but I have never been happy with it when it comes to shoes.

    Cheers!

    G3version.jpg
    1520 x 986 - 146K
  • shadowhawk1shadowhawk1 Posts: 2,211
    the3dwizard said:

    I am finishing up a G3 version (male and female).  Autofit works okay and probably well enough for some people.  However the morphs (both character and joint control) don't always look right to me and the weight maps need work.  You can get some crunching of the mesh which is really noticable in the laces, buckles and straps where the foot bends.  Plus the toes never look right and smoothing won't take care of it.  When I do the conversion I adjust the model to fit the new figure then hand make the character morphs plus repaint the weight maps.  I think autofit can work well for some clothing but I have never been happy with it when it comes to shoes.

    Cheers!

    These are looking awesome. I can't wait till they are in the store, I don't make a lot of 3D content purchases anymore but I have already set money to the side for the G2 versions of these boots. I really want to thank you for putting projects on hold to do this, you have gone far beyond any expectatation I had when I posted the original post. 

  • the3dwizardthe3dwizard Posts: 495
    edited August 2016
    shadowhawk1 said:
    the3dwizard said:

    I am finishing up a G3 version (male and female).  Autofit works okay and probably well enough for some people.  However the morphs (both character and joint control) don't always look right to me and the weight maps need work.  You can get some crunching of the mesh which is really noticable in the laces, buckles and straps where the foot bends.  Plus the toes never look right and smoothing won't take care of it.  When I do the conversion I adjust the model to fit the new figure then hand make the character morphs plus repaint the weight maps.  I think autofit can work well for some clothing but I have never been happy with it when it comes to shoes.

    Cheers!

    These are looking awesome. I can't wait till they are in the store, I don't make a lot of 3D content purchases anymore but I have already set money to the side for the G2 versions of these boots. I really want to thank you for putting projects on hold to do this, you have gone far beyond any expectatation I had when I posted the original post. 

    Thanks for the feedback! I am always willing to listen and want to hear what people like or don't like or what they would like to see.  Doesn't mean I will get to every request but the feedback is valuable.  BTW G3 is done and here is a couple of previews for those who are interested.

    Cheers!

     

    00-treadz-for-genesis-3-daz3d.jpg
    1000 x 1300 - 200K
    03-treadz-for-genesis-3-daz3d.jpg
    1000 x 1300 - 144K
    Post edited by the3dwizard on
  • jakibluejakiblue Posts: 7,281

    Shall I just throw my credit card at you now?? LOL. I will DEFINITELY be buying the Treadz for Gen3 - I still think they are the best boots around.  

    the3dwizard said:
    shadowhawk1 said:
    the3dwizard said:

    I am finishing up a G3 version (male and female).  Autofit works okay and probably well enough for some people.  However the morphs (both character and joint control) don't always look right to me and the weight maps need work.  You can get some crunching of the mesh which is really noticable in the laces, buckles and straps where the foot bends.  Plus the toes never look right and smoothing won't take care of it.  When I do the conversion I adjust the model to fit the new figure then hand make the character morphs plus repaint the weight maps.  I think autofit can work well for some clothing but I have never been happy with it when it comes to shoes.

    Cheers!

    These are looking awesome. I can't wait till they are in the store, I don't make a lot of 3D content purchases anymore but I have already set money to the side for the G2 versions of these boots. I really want to thank you for putting projects on hold to do this, you have gone far beyond any expectatation I had when I posted the original post. 

    Thanks for the feedback! I am always willing to listenand want to hear what people like or don't like or what they would like to see.  Doesn't mean I will get to every request but the feedback is valuable.  BTW G3 is done and here is a couple of previews for those who are interested.

    Cheers!

     

     

  • the3dwizardthe3dwizard Posts: 495
    jakiblue said:

    Shall I just throw my credit card at you now?? LOL. I will DEFINITELY be buying the Treadz for Gen3 - I still think they are the best boots around.  

    the3dwizard said:
    shadowhawk1 said:
    the3dwizard said:

    I am finishing up a G3 version (male and female).  Autofit works okay and probably well enough for some people.  However the morphs (both character and joint control) don't always look right to me and the weight maps need work.  You can get some crunching of the mesh which is really noticable in the laces, buckles and straps where the foot bends.  Plus the toes never look right and smoothing won't take care of it.  When I do the conversion I adjust the model to fit the new figure then hand make the character morphs plus repaint the weight maps.  I think autofit can work well for some clothing but I have never been happy with it when it comes to shoes.

    Cheers!

    These are looking awesome. I can't wait till they are in the store, I don't make a lot of 3D content purchases anymore but I have already set money to the side for the G2 versions of these boots. I really want to thank you for putting projects on hold to do this, you have gone far beyond any expectatation I had when I posted the original post. 

    Thanks for the feedback! I am always willing to listenand want to hear what people like or don't like or what they would like to see.  Doesn't mean I will get to every request but the feedback is valuable.  BTW G3 is done and here is a couple of previews for those who are interested.

    Cheers!

     

     

    Thanks but that might hurt,  It might end up acting like a Ninja throwing star and taking me out!  LOL

  • shadowhawk1shadowhawk1 Posts: 2,211
    jakiblue said:

    Shall I just throw my credit card at you now?? LOL. I will DEFINITELY be buying the Treadz for Gen3 - I still think they are the best boots around.  

    the3dwizard said:
    shadowhawk1 said:
    the3dwizard said:

    I am finishing up a G3 version (male and female).  Autofit works okay and probably well enough for some people.  However the morphs (both character and joint control) don't always look right to me and the weight maps need work.  You can get some crunching of the mesh which is really noticable in the laces, buckles and straps where the foot bends.  Plus the toes never look right and smoothing won't take care of it.  When I do the conversion I adjust the model to fit the new figure then hand make the character morphs plus repaint the weight maps.  I think autofit can work well for some clothing but I have never been happy with it when it comes to shoes.

    Cheers!

    These are looking awesome. I can't wait till they are in the store, I don't make a lot of 3D content purchases anymore but I have already set money to the side for the G2 versions of these boots. I really want to thank you for putting projects on hold to do this, you have gone far beyond any expectatation I had when I posted the original post. 

    Thanks for the feedback! I am always willing to listenand want to hear what people like or don't like or what they would like to see.  Doesn't mean I will get to every request but the feedback is valuable.  BTW G3 is done and here is a couple of previews for those who are interested.

    Cheers!

     

     

    I might as well throw my credit card at you too! 

  • jakibluejakiblue Posts: 7,281

    Not really, my credit card has been so over-used here that it's floppy and limp. It might give you a paper cut tho. :D :D 

    the3dwizard said:
    jakiblue said:

    Shall I just throw my credit card at you now?? LOL. I will DEFINITELY be buying the Treadz for Gen3 - I still think they are the best boots around.  

    the3dwizard said:
    shadowhawk1 said:
    the3dwizard said:

    I am finishing up a G3 version (male and female).  Autofit works okay and probably well enough for some people.  However the morphs (both character and joint control) don't always look right to me and the weight maps need work.  You can get some crunching of the mesh which is really noticable in the laces, buckles and straps where the foot bends.  Plus the toes never look right and smoothing won't take care of it.  When I do the conversion I adjust the model to fit the new figure then hand make the character morphs plus repaint the weight maps.  I think autofit can work well for some clothing but I have never been happy with it when it comes to shoes.

    Cheers!

    These are looking awesome. I can't wait till they are in the store, I don't make a lot of 3D content purchases anymore but I have already set money to the side for the G2 versions of these boots. I really want to thank you for putting projects on hold to do this, you have gone far beyond any expectatation I had when I posted the original post. 

    Thanks for the feedback! I am always willing to listenand want to hear what people like or don't like or what they would like to see.  Doesn't mean I will get to every request but the feedback is valuable.  BTW G3 is done and here is a couple of previews for those who are interested.

    Cheers!

     

     

    Thanks but that might hurt,  It might end up acting like a Ninja throwing star and taking me out!  LOL

     

  • jakibluejakiblue Posts: 7,281

    I suddenly had a vision of the3dwizard.....

     

    3dwizard.jpg
    800 x 547 - 129K
  • 3Diva3Diva Posts: 12,058

    Yep, I'm already counting on getting this (as long as it's not TOO pricey). It might even be the first item I pay full price for - as I doubt I'll have the patience to wait around for it to be on sale. These boots are going to be a must have. :)

  • shadowhawk1shadowhawk1 Posts: 2,211

    Any word on a release date yet? I have my credit card cornered and don't know how much longer I can keep it in the corner ... its starting to look at me funny and licking its lips. 

  • the3dwizardthe3dwizard Posts: 495

    I don't have a date but it is supposed to be a part of the PA sale.  So hopefully soon.

  • shadowhawk1shadowhawk1 Posts: 2,211

    I will keep an eye out for them, but I am not sure I can keep my credit card cornered much longer. Its already bit me twice as I tried to get it back in my wallet! cheeky

  • MattymanxMattymanx Posts: 7,001

    Excellent, looking forward to these

  • shadowhawk1shadowhawk1 Posts: 2,211

    WOHOO!!!!!! They are here!!!! Come on paycheck show up in my account! Thank you so much 3DWizard for converting your Treadz to use with newer generations of characters. I am grabbing the G2 set today. I hope they are great sellers for you after all of this.

  • DestinysGardenDestinysGarden Posts: 2,553

    *Runs in singing* TreadZ, TreadZ, TreadZ! Yay! We got TreadZ. *Stops singing before people get scared*

    Excellent work Mr. Wizard. At that price I bought 2 pair. Bless you for showing the material zones. Best boots ever.

    Now for my really important question, do they come in a size 8 wide?

    cheers!

  • shadowhawk1shadowhawk1 Posts: 2,211
    DestinysGarden said:

    *Runs in singing* TreadZ, TreadZ, TreadZ! Yay! We got TreadZ. *Stops singing before people get scared*

    Excellent work Mr. Wizard. At that price I bought 2 pair. Bless you for showing the material zones. Best boots ever.

    Now for my really important question, do they come in a size 8 wide?

    cheers!

    I will take a 13 Triple E for myself! No cowboy boots for me!

  • the3dwizardthe3dwizard Posts: 495

    With the included morphs you can make them any size you want ;)

    Thanks for the support everyone!  I have released some free textures, hope you like them.  

    http://www.daz3d.com/forums/discussion/110551/treadz-iray-texture

    Sorry for the hopscotch but I am trying to not get into forum trouble :D

     

    Cheers!

  • shadowhawk1shadowhawk1 Posts: 2,211

    I just grabbed them from your other thread and subscribed! Thanks for being a truly outstanding vedor!

  • the3dwizardthe3dwizard Posts: 495
    edited October 2016

    Your are welcome!  I started making a texture pack but didn't have time to finish it, particularly with trying to make 3Delight and Iray presets.  So as I get time I will be release some of the ones I started and I will post them to that freebie thread.

    Cheers!

    Post edited by the3dwizard on
  • fastbike1fastbike1 Posts: 4,082

    Purchased. (Happliy)

  • shadowhawk1shadowhawk1 Posts: 2,211

    WOHOO!!! Just picked up the G2 versions of these boots! Thank you Mr. Wizard!!!!!!

  • Patrick TynerPatrick Tyner Posts: 640

    Sorry if you answered this earlier.  I have your Genesis Treadz and the texture pack.  Thill those texture mats work for your new ones?

  • the3dwizardthe3dwizard Posts: 495

    Yes, textures for these three products are all compatiable with each other.  

    TreadZ for Genesis

    TreadZ for Genesis 2 

    TreadZ for Genesis 3 

    Cheers!

  • wsterdanwsterdan Posts: 3,568

    Both sets are in my cart and only waiting for another item or two to top it up, thanks for bringing these to the new generations (I've grabbed every other verison you've released and have never regretted it).

    -- Walt Sterdan

  • RCDescheneRCDeschene Posts: 2,817
    the3dwizard said:

    Yes, textures for these three products are all compatiable with each other.  

    TreadZ for Genesis

    TreadZ for Genesis 2 

    TreadZ for Genesis 3 

    Cheers!

    I just realised something! We don't have a JeanZ for Genesis 2! Is that one of the other items on your "Ice Age" list? XD

  • jakibluejakiblue Posts: 7,281

    Nabbed the Gen3 treadz (and the iray add on) :D BEST boots ever!!!!!

  • the3dwizardthe3dwizard Posts: 495
    edited October 2016
    RCDeschene said:
    the3dwizard said:

    Yes, textures for these three products are all compatiable with each other.  

    TreadZ for Genesis

    TreadZ for Genesis 2 

    TreadZ for Genesis 3 

    Cheers!

    I just realised something! We don't have a JeanZ for Genesis 2! Is that one of the other items on your "Ice Age" list? XD

    Man you don't even know.  I have this armor that I started in 2006 for V4 sitting on my hard drive!  Even got it out and started a Genesis conversion a while back.   Oh well, someday.

    wsterdan said:

    Both sets are in my cart and only waiting for another item or two to top it up, thanks for bringing these to the new generations (I've grabbed every other verison you've released and have never regretted it).

    -- Walt Sterdan

    Thanks for the long term support!

    WIP19P5.jpg
    493 x 803 - 93K
    Post edited by the3dwizard on
Sign In or Register to comment.