Thanks for your response.  I will try letting it run longer and see if that works.  Also,  I have another question.  I'd like to use my renders for book covers but cannot so far because the face transfer is not picking up enough detail from the original photo which I've attached so you can take a look.   Are there extra settings which need adjusting or am I using the right face transfer version.   I've looked at book covers made by daz3d and the faces are much clearer than mine which is why i'm wondering if it could be my computer.  (I hope not I just purchased a new one - it has an 8GB video card, 32 gb of ram and it's an i9 processor).  Any help would be appreciated.

As shown in the attached image (cropped to avoid potential content issues), the hand squeezing the hip creates a very pronounced morph effect. Is it possible to achieve this directly in DAZ? If so, how?

I’ve tried sculpting similar morphs in ZBrush, but the subdivision wasn’t high enough, and the result looked rough. Could Photoshop post-processing be used to enhance this morph effect as seen in the image? Any tips or workflows would be appreciated!

coolcool0131_eea6a807 said:

It's a g3m outfit on my character in g8.1. My armpits are very unnatural, how do I fix this?

Create a fixing morph target with two semetrical deformers.
Window => Panes => DForm
Spawn morph => your label
Sve As => Support Asset => Modifier Asset
Your User name
Your Morph folder
Down to your created Morph Targets in the list
Save

Hmm I assumed it just ran slower since Blender works on macs, forgot that blender doesnt use Iray :( sad. On that note does daz lag/stutter alot when in viewport? Thinking might get a 16gb model to make scenes when out and about then transfer to the nvidia laptop for render time. Tho I guess going with more ram version I could use blender to render out the scene.

felis said:

Attached is a zip with 2 morphs for the belt for genesis 8. One the above image and one the below.

I tried to match the belt to the 2 more open pants, but it seemed not realistic. In one there wasn't enogh place under the beltstrap, and in the most open there wasn't really room for the belt, so I would have to have morphed the pants as well. So I ended up with shape 1, and even that was way harder than the 1st morph.

I am doing my modelling in blender. Doing simple morphs is easy.

Thank you kindly! 

I don't think I've seen a morph set that changes the shape and size of the nail bed before. They seem to focus on the length and shape of the end of the fingernail. I have some that extend more than the end of the nail, but I don't like to use them for unpainted nails because they stretch the texture with the pink part of the nail bed past the tip of the finger. That doesn't look natural lol. It would be interesting if a nail product included nail bed shaping morphs though.

felis said:

Attached is a zip with 2 morphs for the belt for genesis 8. One the above image and one the below.

I tried to match the belt to the 2 more open pants, but it seemed not realistic. In one there wasn't enogh place under the beltstrap, and in the most open there wasn't really room for the belt, so I would have to have morphed the pants as well. So I ended up with shape 1, and even that was way harder than the 1st morph.

I am doing my modelling in blender. Doing simple morphs is easy.

 

That's really kind of you, thanks! One can probably make the long loose end come down with dForce, just making it rather stiff so it won't droop like a wet noodle. - I didn't know you could use Blender this way, pulling the belt out of the buckle, this is way nice! 

crosswind said:

chrisvn said:

crosswind said:

You bought the product from Renderosity.com ...  The vendors there usually have to split the product into multiple ZIP packages, like the one in your ss4, from 01 to 06. You need to put those six ZIP files into a folder, and unzip all of them. Then you'll got the sub-folders: data, People, Runtime.

Then copy them into the root directory of your Daz Library !

 

I looked at the installation note and on the manual the instructions were to unzip the folders directly into the Library, so I did that, I was able to use the cropped hoodies except one where I don't see the US colors and there are edges that interact with the character's skin and also when you move it the hoodie goes through the skin (screen_V1), I think it's more a settings thing, but I'm new to this is there a tutorial for that?

You either can unzip the package file one by one or holistically unzip them into a temp folder and copy them to the library all together. I always install 3rd-party product with Content Wizard, so I always make a one package without any garbage folders / files (e.g. Documents... etc.)
Short Hoodie 10 material preset is with "US textures"... though I never use it ~~

The issue you had is because of the character's shape is Sakura 8 but the vendor didn't give a FULL HEAD MORPH for it on the hoodie. You can follow this tutorial to fix the FHM... https://youtu.be/HLt0jpxQA20?si=UeJ67vXsv0k2HCg1

The tutorial from Mada is for fixing FULL BODY MORPH (FBM) but you can follow it similarly to fix FHM for the hoodie. I fixed it by using Blender. (ss1) If you don't know Blender or ZBrush but have Mesh Grabber, you also can fix it...

I noticed that to change the hoodie material at first it didn't work, then clicking on the eye deactivated it then reactivating it by clicking on the hoodie for example I changed it and it's the same for the rest this is correct way (screen_V2) ?

The material presets work for me. I couldn't reproduce any issue with them. Maybe it was a glitch on your side....

 

 

Hello, maybe you didn't get my post? I'll resend it to you. Thanks.

Yes, in the end, so since I unzipped it, it went well, I unzipped it directly into the library the necessary files...

But I have the colors with the same hoodie selection as you, however in fit to I don't have sakura 8 but genesis 8 and yet I have the same selection as you! I don't understand because we have to put the genesis 8 female body first..(screen V1 et V2 )

Regarding the video link, it's too advanced for me, I don't even know how to go into editor mode!!! If it worked for you, it will work for me too! 

And for the clothes that pass through the body when the character moves, do you think it is necessary to save the body in collisions? I have not tried in blender, I will have to try

cheard said:

Hello all! I am a bit confused by Face Transfer — or maybe not. Is the following correct?

• There is a free version built into Daz Studio that allows you to save up to 3 face transfers without a watermark.
• You use Face Transfer (1) for Genesis 8 and Face Transfer 2 for Genesis 9.
• The paid versions in the store are exactly the same but remove the 3-figure save cap.

Is that right?

Yes 

Attached is a zip with 2 morphs for the belt for genesis 8. One the above image and one the below.

I tried to match the belt to the 2 more open pants, but it seemed not realistic. In one there wasn't enogh place under the beltstrap, and in the most open there wasn't really room for the belt, so I would have to have morphed the pants as well. So I ended up with shape 1, and even that was way harder than the 1st morph.

I am doing my modelling in blender. Doing simple morphs is easy.

 

Two options, depending on what the actual problem is:

1) Use the "Breasts Natural" morph from the main Body Morphs package. In terms of fitting clothes without them getting scrunched up (or, at least, less scrunched up), it is best for body morphs to assume well-supported breasts and then morph in unsupported ones rather than vice versa. (Although, unfortunately, there's not complete consensus on that, and even amongst core characters they seem inconsistent about whether their base shape is supposed to be wearing a bra or not).

2) If it's a missaved morph that's affecting G8F's base shape (as it might be), identify and correctly resave the morph.

richardandtracy said:

Looks good. I'm occsionally a bit uncomfortable with Thorne's characters fae or not - some look a bit 'Lolita' for me, but you've done a good maturation job on Sarina there.

Regards,

Richard

Thanks!

Yeah, that was Aiko's niche back then.

I have tried to use the other generation 3 females several times but I'm always disappointed by their lack of versatility compared with Aiko (not necessarily their fault, if they had morph expansions similar to A3's I don't have them), and at this point I've use Aiko to fill most of their roles.

 

An old age progression test from 2019 I did using Mulberry.

 

Hello all! I am a bit confused by Face Transfer — or maybe not. Is the following correct?

• There is a free version built into Daz Studio that allows you to save up to 3 face transfers without a watermark.
• You use Face Transfer (1) for Genesis 8 and Face Transfer 2 for Genesis 9.
• The paid versions in the store are exactly the same but remove the 3-figure save cap.

Is that right?

felis said:

Quick morph. I didn't match it to an open shape.

Cool! What did you do this with? 

Squishy said:

e: that full FBX export was taking so long and I wasn't sure if it was hung or not so I interrupted it, I managed to export a 100k vertex part of the original 1.3 million vert hair and while that took quite a long time (something like 10 minutes) it completed OK and re-imported back into D|S, so trying again with the whole model with a silly obvious morph applied and will see if it can be imported as a morph target.

I let the Cinema side export run for two hours and gave up, whether it works or not I am not interested enough to give it that much time between each attempt. 

Quick morph. I didn't match it to an open shape.

rasmusazu said:

To anyone still running into the problem of being unable to export elements such as genitalia or similar accessories, I think I've found how to do it. Though its not completely what we may want.
For some reason.. If you dont choose "Geometry Editor" under tools before exporting the model, the accessory wont show up in the export window and therefore you wont be able to export the morphs connected to it.
This of course creates the problem that, if you're trying to export your model WITH genitalia you will end up with a layer under the genitalia. This can of course be fixed by hiding the area, but the genitalia simply wont adjust to the body properly if you have Geomtry Editor selected during exportation.
Its not a perfect solution, but it works. It has allowed me to export a model with morphs for both the body and the genitalia.

Well, I'm still working with Gen 3 models and still have thie merge bug in Daz 4.21. I couldn't find a version before Daz 4.12 which introduced this bug. It's been like 7 years since my original post and this bug still has not been fixed, it's amazing.

Anyway, I used your solution this time and it worked without issue. The downside like you said is having the genitals in a separate mesh and duplicating lots of morphs. Daz is also not smart enough to not export unneeded morph on the genitals, like face morphs... Amazing too... So you'll have to have one morph export file to export female object first then use another morph file to export genitals. And use an invisible material on the original genitals which will now still show, not a big deal but still another mess to add on top of the complex video game creation process :/

Cinema R18's OBJ exporter will read splines in, but won't write them out again (reading the exported OBJ file it contains no vertex data). Also the R18 FBX exporter seems to be having a hard time writing the 1.3 million vertex hair I'm working with back out to FBX, it's sitting at 0% for some time but I'll leave it alone and see if it either fails or succeeds or what.

e: the Cinema OBJ importer has an option for "lines", but the exporter does not (although the FBX exporter has "curves" and seems to work for small splines)

e: that full FBX export was taking so long and I wasn't sure if it was hung or not so I interrupted it, I managed to export a 100k vertex part of the original 1.3 million vert hair and while that took quite a long time (something like 10 minutes) it completed OK and re-imported back into D|S, so trying again with the whole model with a silly obvious morph applied and will see if it can be imported as a morph target.

OK, speaking of morphs, and of M3D’s latest character … are there any morph packages for either G9 or G8M that can “straighten out” a pinched (side to side) nose like M3D Frank’s? I’ve had no success with this. Obviously I can just use a different character, or apply a skin to a different underlying shape, and all that. This is more of a “theoretical” question — I’d like to better understand how to get the results I envision, rather than just spinning dials until it looks “right.”

Artini said:

Please also look at the answer by ARealiti in the thread:

https://www.daz3d.com/forums/discussion/718061/sending-a-set-to-unity#latest

So things must have changed either with the new Daz or the new Unity (6). Even though i made everything but the original instance of the first prop i wanted to transfer over invisible, everything came over. they became prefabs in Unity. Right now I'm working thru placement and getting them textured with the Unity mesh (if that's the right way to put it). i really wish Daz would get involved and update us on these changes.