GENERAL FREEBIE REQUESTS Part 2

Comments

• DollyGirl Posts: 2,718

  December 2015 edited December 2015

  SteveM17 said:

  Looking for some textures for the Mil Horse that comes free with DS. I had some on my old computer but can't remember where they were from. A search on Sharecg  has been suprisingly unhelpful so far.

  http://freezone.thefantasiesattic.net/index.php?main_page=index&cPath=165&zenid=f0d000f7f0a6d582d63294cb1f855452

  http://www.sharecg.com/pf/full_uploads.php?pf_user_name=solarismoon

  http://www.lynescreations.com/lynefree26.htm

  Post edited by DollyGirl on December 2015
• Eustace Scrubb Posts: 2,741

  December 2015

  SteveM17 said:

  Looking for some textures for the Mil Horse that comes free with DS. I had some on my old computer but can't remember where they were from. A search on Sharecg  has been suprisingly unhelpful so far.

  Wait, what?  MilHorse now comes free with DS?
• SteveM17 Posts: 1,061

  December 2015

  Eustace Scrubb said:

  SteveM17 said:

  Looking for some textures for the Mil Horse that comes free with DS. I had some on my old computer but can't remember where they were from. A search on Sharecg  has been suprisingly unhelpful so far.

  Wait, what?  MilHorse now comes free with DS?

  It was when I downloaded DS 4.8, along with Mil Cat, Mil Dog, Mil Big Cat, M4 and V4 and Genesis 1 & 2. These (apart from Genesis 2) were also free in the previous version on my old computer (might have been DS4.6? Can't remember). I assumed these were standard starter figures to get you going and were always free?
• SteveM17 Posts: 1,061

  December 2015

  DollyGirl said:

  SteveM17 said:

  Looking for some textures for the Mil Horse that comes free with DS. I had some on my old computer but can't remember where they were from. A search on Sharecg  has been suprisingly unhelpful so far.

  http://freezone.thefantasiesattic.net/index.php?main_page=index&cPath=165&zenid=f0d000f7f0a6d582d63294cb1f855452

  http://www.sharecg.com/pf/full_uploads.php?pf_user_name=solarismoon

  http://www.lynescreations.com/lynefree26.htm

  Thanks! I knew I'd seen these somewhere! Cheers.
• DoctorJellybean Posts: 10,150

  December 2015

  I'm looking for a pack of cigs with a morph to crumble it up, or a crumbled cig pack. There is one at ShareCG by Trekkiegrrrl, which is a bit old.
• mjc1016 Posts: 15,001

  December 2015 edited December 2015

  DoctorJellybean said:

  I'm looking for a pack of cigs with a morph to crumble it up, or a crumbled cig pack. There is one at ShareCG by Trekkiegrrrl, which is a bit old.

  Retexture that one, because I haven't seen any newer ones...

  Post edited by mjc1016 on December 2015
• ModernWizard Posts: 904

  December 2015

  Anyone seen an office cubicle similar to this one by Vanishing Point? https://www.renderosity.com/mod/bcs/?ViewProduct=95716

   

  --MW
• Charlie Judge Posts: 13,639

  December 2015 edited December 2015

  ModernWizard said:

  Anyone seen an office cubicle similar to this one by Vanishing Point? https://www.renderosity.com/mod/bcs/?ViewProduct=95716

   

  --MW

  Free with limited use: http://www.sharecg.com/v/77147/gallery/5/3D-Model/Office-Cubicles

  Low cost: http://www.runtimedna.com/GeneriCorp-Cube-Farm.html

  You might check with EClark on this one: https://www.renderosity.com/mod/forumpro/?thread_id=2891122 I don't know if he ever finished it.

  Lots of various ones at Turbo - search for cubicle

  Post edited by Charlie Judge on December 2015
• ModernWizard Posts: 904

  December 2015

  Charlie Judge said:

  ModernWizard said:

  Anyone seen an office cubicle similar to this one by Vanishing Point? https://www.renderosity.com/mod/bcs/?ViewProduct=95716

   

  --MW

  Free with limited use: http://www.sharecg.com/v/77147/gallery/5/3D-Model/Office-Cubicles

  Low cost: http://www.runtimedna.com/GeneriCorp-Cube-Farm.html

  You might check with EClark on this one: https://www.renderosity.com/mod/forumpro/?thread_id=2891122 I don't know if he ever finished it.

  Lots of various ones at Turbo - search for cubicle

  Thanks Charlie Judge -- I think I'll talk to Eblank...If his is not available, there seem to be plenty of alternatives...

   

  --MW
• Charlie Judge Posts: 13,639

  December 2015

  ModernWizard said:

  Charlie Judge said:

  ModernWizard said:

  Anyone seen an office cubicle similar to this one by Vanishing Point? https://www.renderosity.com/mod/bcs/?ViewProduct=95716

   

  --MW

  Free with limited use: http://www.sharecg.com/v/77147/gallery/5/3D-Model/Office-Cubicles

  Low cost: http://www.runtimedna.com/GeneriCorp-Cube-Farm.html

  You might check with EClark on this one: https://www.renderosity.com/mod/forumpro/?thread_id=2891122 I don't know if he ever finished it.

  Lots of various ones at Turbo - search for cubicle

  Thanks Charlie Judge -- I think I'll talk to Eblank...If his is not available, there seem to be plenty of alternatives...

   

  --MW

  MW: That's EClark1894 (not Eblank unless they are the same person) that was making the cubicle.
• Beat578 Posts: 191

  December 2015

  ModernWizard said:

  I desperately need a pair of slouch socks, as seen in this linked photo. Anyone have tips? https://s-media-cache-ak0.pinimg.com/736x/86/01/3b/86013bfb1b1b768c0bd96f6af6ee876a.jpg

   

  --MW

  Hi Modern Wizzard. If you still search for Socks: I made a Pair for Genesis 2 Females. They can be changed into different types and have a morph to "Roll them down" as well. You'll find tem here if you still look for them:

  http://www.sharecg.com/v/83201/view/21/DAZ-Studio/G2_Socks

  Cheers Beat
• Wolfmanjim Posts: 35

  December 2015

  This is going to sound weird, but I am doing Olympic related renders. I have for a track, but  now I want  a water hazzard for the steeplechase?  This one is very easy and I can texture it myself.

  http://www.wired.com/wp-content/uploads/blogs/playbook/wp-content/uploads/2012/07/steeplechase-water-jump-diagram.jpg

   

  BTW, it has to be Poser friendly. 
• ModernWizard Posts: 904

  December 2015

  Beat578 said:

  ModernWizard said:

  I desperately need a pair of slouch socks, as seen in this linked photo. Anyone have tips? https://s-media-cache-ak0.pinimg.com/736x/86/01/3b/86013bfb1b1b768c0bd96f6af6ee876a.jpg

   

  --MW

  Hi Modern Wizzard. If you still search for Socks: I made a Pair for Genesis 2 Females. They can be changed into different types and have a morph to "Roll them down" as well. You'll find tem here if you still look for them:

  http://www.sharecg.com/v/83201/view/21/DAZ-Studio/G2_Socks

  Cheers Beat

  Beat -- thank you very much! I will definitely get these. Now my 1980s fashions will be more accurate!

  --MW
• Pleblu Posts: 32

  December 2015 edited December 2015

  Does anyone know of gemstones similar to those used in this promo (the first image)?

   

  http://www.daz3d.com/catalog/product/view/id/22072

  Post edited by Pleblu on December 2015
• Chohole Posts: 33,604

  December 2015

  Pleblu said:

  Does anyone know of gemstones similar to those used in this promo (the first image)?

   

  http://www.daz3d.com/catalog/product/view/id/22072

  There are these ones, if you can use .dxf files   http://www.3dlapidary.com/HTML/Stones2.htm
• DollyGirl Posts: 2,718

  December 2015

  Pleblu said:

  Does anyone know of gemstones similar to those used in this promo (the first image)?

   

  http://www.daz3d.com/catalog/product/view/id/22072

  If all you want is just a diamond then there is this one: http://www.sharecg.com/v/64999/gallery/21/DAZ-Studio/Ds4-Diamond by Atrion666

  This is the link to the obj files for Cho's referenced gem set. OBJ zip is about half way down: http://www.3dlapidary.com/HTML/Collections.htm
• Charlie Judge Posts: 13,639

  December 2015 edited December 2015

  Pleblu said:

  Does anyone know of gemstones similar to those used in this promo (the first image)?

   

  http://www.daz3d.com/catalog/product/view/id/22072

  http://www.sharecg.com/v/59928/related/11/Poser/Updated-Chaos-Emeralds-Gemstones

  http://www.turbosquid.com/3d-models/seven-gemstones-3ds-free/302160

  and check out this site for authentic models but you  may have to convert and apply shaders: http://www.3dlapidary.com/HTML/Collections.htm

   

  Post edited by Charlie Judge on December 2015
• Fisty Posts: 3,416

  December 2015 edited December 2015

  Charlie Judge said:

  and check out this site for authentic models but you  may have to convert and apply shaders: http://www.3dlapidary.com/HTML/Collections.htm

  Just grab the .obj format zip, second from the bottom, imports into DS and Poser with no fuss at all and takes shaders/materials perfectly.  In DS make sure the shader you're using has the smothing angle very low, like between 1 and 5 instead of the normal 89 something.  In Poser make sure you turn off the object's render time smoothing and change the angle to between 1 and 5 as well (2nd page of the object properties tab when you have it selected)

  I used them in this promo, super nice props.

  

  Post edited by Fisty on December 2015
• patience55 Posts: 7,006

  December 2015

  mjc1016 said:

  DoctorJellybean said:

  I'm looking for a pack of cigs with a morph to crumble it up, or a crumbled cig pack. There is one at ShareCG by Trekkiegrrrl, which is a bit old.

  Retexture that one, because I haven't seen any newer ones...

   

  No packaging but there is a new cigarette here: http://catherine3678a.deviantart.com/art/Lady-s-Ciggies-576067294

   
• patience55 Posts: 7,006

  December 2015

  Wolfmanjim said:

  This is going to sound weird, but I am doing Olympic related renders. I have for a track, but  now I want  a water hazzard for the steeplechase?  This one is very easy and I can texture it myself.

  http://www.wired.com/wp-content/uploads/blogs/playbook/wp-content/uploads/2012/07/steeplechase-water-jump-diagram.jpg

   

  BTW, it has to be Poser friendly. 

  Here you go:  http://www.daz3d.com/forums/discussion/67935/water-jump-for-horses#latest

  

   
• SonoftheStars Posts: 35

  December 2015

  Here is my request:

  I am looking for a set of Star Wars Mandalorian armor, like the one Boba Fett wears.  There is one on ShareCG, but I am not dealing with ShareCG at the moment for personal reasons.  Does anyone know of another set at a different location, or can make me one?
• DollyGirl Posts: 2,718

  December 2015

  podracerga said:

  Here is my request:

  I am looking for a set of Star Wars Mandalorian armor, like the one Boba Fett wears.  There is one on ShareCG, but I am not dealing with ShareCG at the moment for personal reasons.  Does anyone know of another set at a different location, or can make me one?

  https://www.renderosity.com/mod/freestuff/the-mando-bundle/57639
• SonoftheStars Posts: 35

  December 2015

  Oh my gosh thank you so much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

   
• DollyGirl Posts: 2,718

  December 2015

  podracerga said:

  Oh my gosh thank you so much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

   

  Wayii is Azhrarn on Rendo. She does not have all of the same things on the two sites but there are some. Your welcome
• magdalene Posts: 34

  December 2015

  Hello ,

   

  I am desperately wanting for daz studio a  russian head scarf for a babushka for an animation I am doing  . I cant make clothes and cant find this anywhere . It doesnt have to be free.

  Picture below. I would be so grateful to find one , it doesnt have to be free . I need to be able to morph it .  I am happy to pay someone to make it for me and they can share it etc . I find it so hard to find historical costumes that are not sexualized. 

  thanks

   

  

  

  Mikhail Nesterov - Taking the Veil.jpg

  1000 x 935 - 242K
• Charlie Judge Posts: 13,639

  December 2015 edited December 2015

  Would these work?: http://www.german-3d.com/market/database/create_htm_0_file.php?product_id=64938

  And there are these shorter ones in Poser dynamic cloth: http://www.sharecg.com/v/71365/related/11/Poser/Poser-V4-Peasants-Headscarves

  Post edited by Charlie Judge on December 2015
• Tremcnairs Posts: 1

  December 2015

  I hope that daz3d well give out the victoria5 and michael5 combo bundle hopefully
• patience55 Posts: 7,006

  December 2015

  Tremcnairs said:

  I hope that daz3d well give out the victoria5 and michael5 combo bundle hopefully

  Been partying a lot eh!
• DoctorJellybean Posts: 10,150

  December 2015

  Any boom microphone stands around, like this one?

  
• mjc1016 Posts: 15,001

  December 2015

  DoctorJellybean said:

  Any boom microphone stands around, like this one?

  

  Down near the bottom of the page...

  http://www001.upp.so-net.ne.jp/ruten-ryojo/poser/download.html