Daz 3D is part of 
Connect
DAZ Productions, Inc.
7533 S Center View Ct #4664
West Jordan, UT 84084
Licensing Agreement | Terms of Service | Privacy Policy | EULA
© 2026 Daz Productions Inc. All Rights Reserved.
Comments
Anyone else seeing an issue where the Outlet doesn't even discount? I'm a Premier Member, logged in, and I still see this...
@Xandyr78 I am seeing the same thing
The Outlet thing has been going on since the beginning of the month when the selection changed.
Xandyr78, @Xandyr78, it's been like this since August 1, and it's been reported here and discussed in the Outlet and Quick Grab (which is also broken: prices are right, but hasn't refreshed for 1.5 now).
And how many weeks is the Quick Grab? 3, I think.
Every Monday and Tuesday, the cart price gets double tokens- in other words, on Monday & Tuesday spending $10usd gets me 2 tokens, whereas all other days $10 gets me 1 token. This has been the case for me since they restarted the Token system again (iirc sometime in 2025, after the initial roll-out of tokens system stopped for a while). As recently as during one or more of the big sales campaigns they were even publicizing on those days that it was a DOUBLE TOKEN DAY in the sales sliders on the home shop page.; i remmber thinkin it was going to be an even more token-y day but it turned out to be nothing but a shout-out to the fact those were double token days. I do recall people posting in the forum(s) about how that was advertisied likeke an extra special those days when it was actually just Monday and Tuesday as normal.
Note: how many tokens you get depends on your tier (base, plus, or Premier) every day of the week; on Monday & Tuesday WHATEVER your normal token rate is, gets doubled. NOTE #2: I know this is true for PLUS susbscribers -as I am one- but I do not know positively if double tokens on Monday & Tuesday ALSO applies to Base and Premierr plans since I am not in those tiers. The page that describes the Token system workings -of course- makes no mention of the Double Token days, whih means that it could be taken away at any time since it does not seem to be explicitly noteed as a feature of the token system on that page.
It's been going on for quite a while... Even before Premier, but I don't know exactly when... It used to have a banner on Mondays and Tuesdays, but it's not written anywhere... It's the kinda thing "those who know, know; those who don't, don't."
Changes every week, on Mondays.
Yhank you! Now I see them for free. :)
It hasn't changed the last three weeks (at least)
nemesis10 said:
barbult said:
nemesis10 said:
barbult said:
I bought the Iray Interior Speed Lights. The only documentation in the product is a single TIP file. It refers to a "culling slider added to the camera". I can't find any such slider. Does anyone know where it is?
are you able to load the culling camera? It is basically a camera with section panes attached.
Yes, the camera loads with section planes attached. It seems to work well. But I can't find any "culling slider" that the tip says can be used to adjust how much of the scene is culled. I made a screenshot of the tip message, but of course it won't upload.
I have purchased it but haven't installed it yet... but the readme describes
/data/KindredArts/KAHDRMSHDAT/ISpeed Lights Culling Camera/Camera.dsf
/data/KindredArts/KAHDRMSHDAT/ISpeed Lights Culling Camera/Morphs/KindredArts/Base/Culling.dsf
so it is a morph... try selecting the camera, expand it in the library so you can see the section planes, and with them all selected and the camera, search for "culling" in the shaping pane and library pane. I suspect it is a morph for the shaping panes.
Thanks for your help! Those dsf files are in my content library's data folder, just as you described, but I cannot for the life of me find the morph in the Daz Studio interface.I've turned on Show Hidden Properties. I've looked in the Parameters pane and the Shaping pane. When you get time to try the new product, if you find the slider (morph), please tell me how to find it. I've submitted a help request, too.
One thing I see is that the camera's DUF name in the Content Library is "ISpeed Lights Culling Camera" but in my Scene pane, the loaded camera is "ISpeed Lights Light Camera". I don't know if those label differences matter or not. The camera's Scene ID is "/data/KindredArts/KAHDRMSHDAT/ISpeed%20Lights%20Culling%20Camera/Camera.dsf#Camera".
@barbult,
Hello. Your post above is from a thread that was closed quite a while ago so I could not quote copy it to ask whether your issues with Kindred Arts’ Iray Interior Speed Lights (https://www.daz3d.com/iray-interior-speed-lights) were ever resolved. Iray Interior Speed Lights is in a group of products that can be discounted today with code LOVE-ARTISTS.
Thanks.
I submitted a help request about the problem three years ago. Six months later, after pestering them for update info, I finally was told that the product was performing as designed, and my request was closed and marked solved. I got no information about how to invoke the "cuilling". So, I'd say no, my problem was not solved.
That's too bad. Thanks
I don't have that particular product, so I don't know how much help it'll be, but I do have a culling camera from another product of KindredArts: Interior Light Pro for Filament and Iray, and the culling camera setting is in the camera section.
I think it was this week and last week it failed to change, we still have the items from two-and-a-half weeks ago.
@barbult & @joanna
After doing a bit more research, I rediscovered that I already own another Kindred Arts product that also addresses interior lighting. I own Iray Window Lights (SKU 114402, https://www.daz3d.com/iray-window-lights) which is a more recent product than Iray Interior Speed Lights (SKU 91328, https://www.daz3d.com/iray-interior-speed-lights).
It didn't change this week. Last week, it changed. I check every week and keep track of the items I want. The bugs are a this month/this week thing... Either the guy who updates it took some vacation or was fired.
It is taking longer than normal to fix this, but they are working on it still.
Maybe one should just stop advertising completely broken features on the store front page at this point ...
Agreed
Regarding the Artist Store sales relating to today's new releases - only 155 of Stonemasons 228 inventory are on sale. Also, only 289 of Mightmite's 1112 inventory are on sale. Are there limitations I'm not aware of or is it a glitch?
Usually it's because they didn't meet the requirements for that particular sale; therefore, they were left out. We will, however, verify this in case it is a mistake.
last time it changed was July 20.
So, three weeks, like I remembered. Amazing I remembered. Thanks.
20 is two. It changes on Mondays. Two changes were skipped. On 10, it'll be three.
We will have to agree to disagree since "last Monday" itself is ambiguous in English.
Are you sure "Elimited" is the word to use here? Are we sure about that?
That's normal these days. Daz's "store sale" deals usually exclude anything that's newer than a certain date, which in this case seems to have been set way back in February of 2025 when Dreaded Chasm was released, as well as items that are already being discounted heavily for other reasons like Outlaw Alley Temple of the Sun, Volumetric clouds, and others that are currently priced at $3.49. or less (mostly in Outlet, I think.) .
What matters is that there should have been two renewals that didn't happen, not three. And I don't think it's quite ambiguous... Last Monday, from today, is August 3 -- no ambiguity. If, by "It hasn't changed the last three weeks" you meant "since three Mondays ago," you're right. The confusion can be that I'm think about the number or renewals (which, indeed, I was wrong -- they were two, not one) and you're thinking about the number of Mondays.
'Buy both New Releases to get an extra 30% off them' is not working