GENERAL FREEBIE REQUESTS Part 2

Comments

• LuckBe Posts: 93

  March 2015 edited March 2015

  mikey186 said:

  I tried that, it's too dull. I was hoping to find an alternative or make a Aiko 3 morph for Genesis 2 female

  The only legitimate way to get an actual Aiko 3 morph for G2 would be to purchase it- redistribution of the morph, even transferred, would be against the TOS.

  Slosh has Aiko 4 and Aiko 5 available for G2F, and Hiro 4 & 5 for G2M, available in his legacy shape packages for G2.

  Post edited by LuckBe on March 2015
• mikey186 Posts: 84

  March 2015 edited December 1969

  ladychance said:

  mikey186 said:

  I tried that, it's too dull. I was hoping to find an alternative or make a Aiko 3 morph for Genesis 2 female

  The only legitimate way to get an actual Aiko 3 morph for G2 would be to purchase it- redistribution of the morph, even transferred, would be against the TOS.

  Slosh has Aiko 4 and Aiko 5 available for G2F, and Hiro 4 & 5 for G2M, available in his legacy shape packages for G2.

  How can I find that? It's not even in the DAZ store
• fixmypcmike Posts: 19,729

  March 2015 edited December 1969

  http://www.daz3d.com/slosh
• Charlie Judge Posts: 13,640

  March 2015 edited December 1969

  You could get this for Genesis:
  http://www.daz3d.com/a3-and-h3-shapes-for-genesis

  And then use GenX to transfer it to Genesis2:
  http://www.daz3d.com/genx-addon-gen3-for-a3-and-h3
• mikey186 Posts: 84

  March 2015 edited December 1969

  Charlie Judge said:

  You could get this for Genesis:
  http://www.daz3d.com/a3-and-h3-shapes-for-genesis

  And then use GenX to transfer it to Genesis2:
  http://www.daz3d.com/genx-addon-gen3-for-a3-and-h3

  Thanks for the tip! I never used GenX before, but it looks like it'll require 2 GenX assets (and base) to work. I don't have those.
• Charlie Judge Posts: 13,640

  March 2015 edited March 2015

  Yes, you will need this base:
  http://www.daz3d.com/genesis-generation-x2

  plus the addition and assets I listed in my previous post (post 964)

  Overall, maybe a little costly for a one time project, but it is a way to get there and you will have the program for possible other uses in the future.

  Post edited by Charlie Judge on March 2015
• LuckBe Posts: 93

  March 2015 edited December 1969

  mikey186 said:

  ladychance said:

  mikey186 said:

  I tried that, it's too dull. I was hoping to find an alternative or make a Aiko 3 morph for Genesis 2 female

  The only legitimate way to get an actual Aiko 3 morph for G2 would be to purchase it- redistribution of the morph, even transferred, would be against the TOS.

  Slosh has Aiko 4 and Aiko 5 available for G2F, and Hiro 4 & 5 for G2M, available in his legacy shape packages for G2.

  How can I find that? It's not even in the DAZ store

  Actually, they are.

  http://www.daz3d.com/generation-4-legacy-shapes-for-genesis-2-female
  http://www.daz3d.com/generation-5-legacy-shapes-for-genesis-2-female
  http://www.daz3d.com/generation-4-legacy-shapes-for-genesis-2-male
  http://www.daz3d.com/generation-5-legacy-shapes-for-genesis-2-male

  And they are a good bit less expensive than say, Aiko 6.
• Ruphuss Posts: 2,631

  March 2015 edited December 1969

  this is a request for mcasual
  matanim works fine but the animation in the surface tab is not save able in a studio 4.7 szene
  any help ?
• mikey186 Posts: 84

  March 2015 edited December 1969

  I guess now with anime out of the way, Is there someone who can make a low-top converse shoes (or if anyone had already made those)? I already have "The Jogger" ones that have the converse, but it's only a high-top. I like the one with a LOW-top (like most of everyone has).
• Tramp Graphics Posts: 2,435

  March 2015 edited December 1969

  Here's a "tricky" one for someone who knows how to to make good hand pose sets. Im looking for traditional kuji-in "ninja" hand signs hand poses for Genesis figures.
• ModernWizard Posts: 904

  March 2015 edited December 1969

  Hi all. What recommendations do you have for astronaut/cosmonaut/spacesuit/moonwalk outfits?

  I have, of course, discovered shukky's two spacesuits for A3 here [sleek and stylized] and here [bulky and realistic].

  I have also found Flesh Forge's Encounter for V4 here [retro and very clingy].

  What else have people found? I'm particularly looking for some sort of bodysuit [i.e., no plated armor], a helmet that shows the full face and a backpack that clearly contains breathing apparatus. In other words, bodysuits + glass bubbles on the head, while they may look cool and retro, will not cut it. Realistic, stylized and, uh, clingy suggestions accepted as long as they have the basic elements.

  --MW
• mjc1016 Posts: 15,001

  March 2015 edited December 1969

  ModernWizard said:

  Hi all. What recommendations do you have for astronaut/cosmonaut/spacesuit/moonwalk outfits?

  I have, of course, discovered shukky's two spacesuits for A3 here [sleek and stylized] and here [bulky and realistic].

  I have also found Flesh Forge's Encounter for V4 here [retro and very clingy].

  What else have people found? I'm particularly looking for some sort of bodysuit [i.e., no plated armor], a helmet that shows the full face and a backpack that clearly contains breathing apparatus. In other words, bodysuits + glass bubbles on the head, while they may look cool and retro, will not cut it. Realistic, stylized and, uh, clingy suggestions accepted as long as they have the basic elements.

  --MW

  How about the source?

  http://nasa3d.arc.nasa.gov/models

  None of them are rigged, though...
• thenotoriousjed Posts: 397

  March 2015 edited December 1969

  Looking for a bird. Just want a simple bird for a panel in my comic. Want it to be somewhat realistic and hopefully posable. May need to show it flying then standing. Any suggestions?
• Kerya Posts: 10,943

  March 2015 edited December 1969

  Not poseable
  http://www.lynescreations.com/lynefree19.htm
  http://www.most-digital-creations.com/hummingbird.htm
  http://www.most-digital-creations.com/lovebird.htm

  I think there was a crow at Poserclub ... but I am running out of time:
  http://www.poserclub.net/index.php/freebee
• thenotoriousjed Posts: 397

  March 2015 edited December 1969

  Kerya said:

  Not poseable
  http://www.lynescreations.com/lynefree19.htm
  http://www.most-digital-creations.com/hummingbird.htm
  http://www.most-digital-creations.com/lovebird.htm

  I think there was a crow at Poserclub ... but I am running out of time:
  http://www.poserclub.net/index.php/freebee

  Great. Will check these out. Thanks for the help.
• atticanne Posts: 3,009

  March 2015 edited December 1969

  mjc1016 said:

  ModernWizard said:

  Hi all. What recommendations do you have for astronaut/cosmonaut/spacesuit/moonwalk outfits?

  I have, of course, discovered shukky's two spacesuits for A3 here [sleek and stylized] and here [bulky and realistic].

  I have also found Flesh Forge's Encounter for V4 here [retro and very clingy].

  What else have people found? I'm particularly looking for some sort of bodysuit [i.e., no plated armor], a helmet that shows the full face and a backpack that clearly contains breathing apparatus. In other words, bodysuits + glass bubbles on the head, while they may look cool and retro, will not cut it. Realistic, stylized and, uh, clingy suggestions accepted as long as they have the basic elements.

  --MW

  How about the source?

  http://nasa3d.arc.nasa.gov/models

  None of them are rigged, though...

  What a great resource! Thanks for the tip-off. I had no idea NASA was into 3D graphics.
• 404nicg Posts: 270

  March 2015 edited December 1969

  Does anybody know where I could find a digital clock/radio with some kind of morph/parameter to change the time? Willing to pay if necessary
• Tramp Graphics Posts: 2,435

  March 2015 edited March 2015

  404nicg said:

  Does anybody know where I could find a digital clock/radio with some kind of morph/parameter to change the time? Willing to pay if necessary

  Here's one I found . FYI, for a digital clock, you wouldn't use morphs to change the time anyway, rather, you'd use different textures in the digits' material zone(s). This one does come with a transparency map template for the digital clock face display.

  Post edited by Tramp Graphics on March 2015
• 404nicg Posts: 270

  March 2015 edited December 1969

  Tramp Graphics said:

  404nicg said:

  Does anybody know where I could find a digital clock/radio with some kind of morph/parameter to change the time? Willing to pay if necessary

  Here's one I found . FYI, for a digital clock, you wouldn't use morphs to change the time anyway, rather, you'd use different textures in the digits' material zone(s). This one does come with a transparency map template for the digital clock face display.

  ayyyyye thanks alot that's perfect. I figured you would have to play with the textures in order to adjust the times...I was trying to be lazy.
• ModernWizard Posts: 904

  April 2015 edited April 2015

  Has anyone seen a hat with ear flaps and strings off the ends, like this? http://www.redheart.com/free-patterns/ear-flap-hat

  A fur-lined trapper hat would also work: http://www.furhatworld.com/womens-rabbit-fur-aviator-trapper-hat-pink-p-1523.html

  Thanks!

  --MW

  Post edited by ModernWizard on April 2015
• mjc1016 Posts: 15,001

  April 2015 edited December 1969

  ModernWizard said:

  Has anyone seen a hat with ear flaps and strings off the ends, like this? http://www.redheart.com/free-patterns/ear-flap-hat

  A fur-lined trapper hat would also work: http://www.furhatworld.com/womens-rabbit-fur-aviator-trapper-hat-pink-p-1523.html

  Thanks!

  --MW

  Which base figure?
• eallenvt_d040231c53 Posts: 9

  April 2015 edited December 1969

  mjc1016 said:

  ModernWizard said:

  Has anyone seen a hat with ear flaps and strings off the ends, like this? http://www.redheart.com/free-patterns/ear-flap-hat

  A fur-lined trapper hat would also work: http://www.furhatworld.com/womens-rabbit-fur-aviator-trapper-hat-pink-p-1523.html

  Thanks!

  --MW

  Which base figure?

  It doesn't really matter, as long as it's not a toon. I'm looking for something realistic.

  --MW
• Eustace Scrubb Posts: 2,741

  April 2015 edited December 1969

  Something in orange and pink, I suppose? ;)
• eallenvt_d040231c53 Posts: 9

  April 2015 edited December 1969

  Eustace Scrubb said:

  Something in orange and pink, I suppose? ;)

  Orange and pink make everything better! Especially in combination! :p But no...no color restrictions...

  --MW
• Kerya Posts: 10,943

  April 2015 edited April 2015

  Thierry Perrain's Pilot?
  http://thierry.perrain.free.fr/Downloads.html

  http://www.renderosity.com/mod/freestuff/?item_id=70327

  Post edited by Kerya on April 2015
• Eustace Scrubb Posts: 2,741

  April 2015 edited December 1969

  Kerya said:

  Thierry Perrain's Pilot?
  http://thierry.perrain.free.fr/Downloads.html

  http://www.renderosity.com/mod/freestuff/?item_id=70327

  I hadn't thought of that one! There's another similar hat for V4 on ShareCG, too, but no pompom, and in either case one has to hide the goggles.

  Well, if it's for the image I think it is, maybe not.
• mjc1016 Posts: 15,001

  April 2015 edited December 1969

  There's an old Adventurerer Head Gear set over at RDNA, in the Freebie section (registration required)...

  A quick hit with a tiling shader and hiding the buckles...

  

  

  hat.png

  800 x 800 - 336K
• Eustace Scrubb Posts: 2,741

  April 2015 edited December 1969

  I think the look is more like this:

  www.nerdsandnomsense.com%252Fdiy-2%252Fthe-cunning-j-c-hat%252F&source=iu&pf=m&fir=STyOIc1e40HoAM%3A%2CNxJ4m-oka8jPZM%2C_&usg=__iziVMdMBbA9umTiI5dLxsxS7W8Y=&biw=1329&bih=643&ved=0CCoQyjc&ei=hTAgVbjkCIj9oQTp0IHIBw#imgdii=_">People know he's not afraid of anything.
• l_cunningham Posts: 68

  April 2015 edited December 1969

  I am looking for a Phoenician merchant ship. The keyword "Phoenician" doesn't turn up anything on either ShareCG or Renderosity, and to pick through all available boats and ships for one that looks right would take ages. Has anyone seen one of these? I use Poser.
  Thanks.

  

  

  ship4.jpeg

  640 x 349 - 114K

  

  

  ship3.jpg

  600 x 450 - 53K

  

  

  ship2.jpg

  1333 x 1074 - 192K

  

  

  ship.png

  1280 x 971 - 3M
• LuckBe Posts: 93

  April 2015 edited December 1969

  Tramp Graphics said:

  Here's a "tricky" one for someone who knows how to to make good hand pose sets. Im looking for traditional kuji-in "ninja" hand signs hand poses for Genesis figures.

  I happened across these, and they seem to be about what you're looking for. They're for M3 but should still work for genesis with some adjustment. http://www.poserclub.net/index.php/freebee/item/48-f48