Loading...
> >

General Freebie Requests

1…1920222425…50

Comments

  • beachlegsbeachlegs Posts: 474
    edited December 1969

    I am looking for v4 climbing poses, I found some for m4 on daz but want them for v4 if possible.

  • lemonade8lemonade8 Posts: 8
    edited November 2012

    fleetpp said:
    Looking for a free or low cost fairy outfit for Victoria 3, something similar to the fairylicious outfit.
    http://www.daz3d.com/shop/fairylicious-v4
    Here is a vine outfit for V3 and A3 from Yamato. It's under 'cloth' and it is sort of similar. Really cute! Enjoy. (the other outfits are cute as well, ) http://www.eurus.dti.ne.jp/~masasi/DOWNLOAD/yamato/index.htm
    Someone also made a texture for it in red at ShareCG. Here is the link to that...
    http://sharecg.com/v/18724/

    I would love to know if there is some sort of baby blanket shell that I could put the Mil3 baby in so it would look swaddled or wrapped in a blanket. I've wanted this forever and can never find it anywhere either to buy or for free. It could just be something where I could turn off visibility for all of the limbs and torso and just have the little face peeking out, even. I wish I knew how to do this, but I don't.

    Thanks

    Post edited by lemonade8 on
  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    beachsidelegs said:
    I am looking for v4 climbing poses, I found some for m4 on daz but want them for v4 if possible.

    Most of the Gen4 poses work well enough on the other Gen4 figures.

  • beachlegsbeachlegs Posts: 474
    edited December 1969

    mjc1016 said:
    beachsidelegs said:
    I am looking for v4 climbing poses, I found some for m4 on daz but want them for v4 if possible.

    Most of the Gen4 poses work well enough on the other Gen4 figures.

    So am I right in thinking the Michael4 poses will work with the Victoria4 ?

  • fleetppfleetpp Posts: 199
    edited December 1969

    lemonade8 said:
    fleetpp said:
    Looking for a free or low cost fairy outfit for Victoria 3, something similar to the fairylicious outfit.
    http://www.daz3d.com/shop/fairylicious-v4
    Here is a vine outfit for V3 and A3 from Yamato. It's under 'cloth' and it is sort of similar. Really cute! Enjoy. (the other outfits are cute as well, ) http://www.eurus.dti.ne.jp/~masasi/DOWNLOAD/yamato/index.htm
    Someone also made a texture for it in red at ShareCG. Here is the link to that...
    http://sharecg.com/v/18724/

    I would love to know if there is some sort of baby blanket shell that I could put the Mil3 baby in so it would look swaddled or wrapped in a blanket. I've wanted this forever and can never find it anywhere either to buy or for free. It could just be something where I could turn off visibility for all of the limbs and torso and just have the little face peeking out, even. I wish I knew how to do this, but I don't.

    Thanks


    Thank you very much! This is exactly what I was looking for.
    very respectfully,
    fleet

  • fleetppfleetpp Posts: 199
    edited December 1969

    beachsidelegs said:
    mjc1016 said:
    beachsidelegs said:
    I am looking for v4 climbing poses, I found some for m4 on daz but want them for v4 if possible.

    Most of the Gen4 poses work well enough on the other Gen4 figures.

    So am I right in thinking the Michael4 poses will work with the Victoria4 ?

    I've done it. You might have to do a bit of tweaking, but it beats doing it from scratch.
    I've also used Victoria 3 poses on Victoria 4 (I had to tweak them some to get them looking acceptable).

  • beachlegsbeachlegs Posts: 474
    edited December 1969

    fleetpp said:
    beachsidelegs said:
    mjc1016 said:
    beachsidelegs said:
    I am looking for v4 climbing poses, I found some for m4 on daz but want them for v4 if possible.

    Most of the Gen4 poses work well enough on the other Gen4 figures.

    So am I right in thinking the Michael4 poses will work with the Victoria4 ?

    I've done it. You might have to do a bit of tweaking, but it beats doing it from scratch.
    I've also used Victoria 3 poses on Victoria 4 (I had to tweak them some to get them looking acceptable).

    Thank you fleetpp I am going to go buy the poses just wanted to make sure first :)

  • ujelly1701_6367cb2de9ujelly1701_6367cb2de9 Posts: 2
    edited December 1969

    Hey I'm wondering if anyone has a copy available of the Carrie Fisher head morph discussed here. It used to be on sharecg but it was taken down some time ago. Thanks.

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    ujelly1701 said:
    Hey I'm wondering if anyone has a copy available of the Carrie Fisher head morph discussed here. It used to be on sharecg but it was taken down some time ago. Thanks.

    Werts morphs are gone...and redistribution wouldn't be allowed.

  • ujelly1701_6367cb2de9ujelly1701_6367cb2de9 Posts: 2
    edited December 1969

    mjc1016 said:

    Werts morphs are gone...and redistribution wouldn't be allowed.

    That's a shame. Thanks though.

  • srieschsriesch Posts: 4,241
    edited December 1969

    Does anybody know where I can find a decent variety of V3 walking poses?

    Oddly I seem to have almost none. Thanks!

  • robkelkrobkelk Posts: 3,259
    edited December 1969

    Sean Riesch said:
    Does anybody know where I can find a decent variety of V3 walking poses?

    Oddly I seem to have almost none. Thanks!

    There are a couple here, but I don't know whether they're what you're looking for:

    http://www.nerd3d.com/catalog/index.php?cPath=1_13

  • srieschsriesch Posts: 4,241
    edited December 1969

    robkelk said:

    There are a couple here, but I don't know whether they're what you're looking for:
    http://www.nerd3d.com/catalog/index.php?cPath=1_13

    Thanks, but not quite what I was looking for. I'm looking more for static poses for use in DAZ Studio, not animation or walk designer related. I'm trying to get a variety of walking related poses; could be anything from just walking to walking and talking, walking and carrying things, walking and pointing, etc. Of course I can just create them myself too, but it's always nice to have a large group of starting points to speed things up.
  • DollyGirlDollyGirl Posts: 2,646
    edited December 1969

    Sean Riesch said:
    robkelk said:

    There are a couple here, but I don't know whether they're what you're looking for:
    http://www.nerd3d.com/catalog/index.php?cPath=1_13

    Thanks, but not quite what I was looking for. I'm looking more for static poses for use in DAZ Studio, not animation or walk designer related. I'm trying to get a variety of walking related poses; could be anything from just walking to walking and talking, walking and carrying things, walking and pointing, etc. Of course I can just create them myself too, but it's always nice to have a large group of starting points to speed things up.

    Then how about these:
    http://www.freeposes.net/poses-free

  • srieschsriesch Posts: 4,241
    edited December 1969

    Dollygirl said:

    Then how about these:
    http://www.freeposes.net/poses-free

    Thanks! there are a lot of poses there, handy. I'll look through them for the V3 poses as soon as I get a chance.
  • fleetppfleetpp Posts: 199
    edited December 1969

    Sean Riesch said:
    Does anybody know where I can find a decent variety of V3 walking poses?

    Oddly I seem to have almost none. Thanks!

    I found these at sharecg
    http://www.sharecg.com/v/61835/related/11/Poser/V3-Walk-Run-Poses

    They description says they were made using poser 2012 and not intended for DAZ, but I tested a couple and they work in DAZ

  • Geminii23Geminii23 Posts: 1,327
    edited December 1969

    This has probably been requested before, but I am looking for a way to create light sabers in DAZ 4.5 (M5/V5). I would love to try making some Star Wars type art!

    Any suggestions?

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    http://www.sharecg.com/v/4634/View/5/3D-Model/Darth-Vader-lightsaber
    http://www.sharecg.com/v/47343/View/5/3D-Model/Lightsaber
    http://www.sharecg.com/v/51799/View/5/3D-Model/Another-Light-Saber-Model
    http://www.sharecg.com/v/49644/View/11/Poser/Laser-Nunchaku-for-Poser
    http://www.sharecg.com/v/49468/View/11/Poser/Light-Saber-for-Poser
    http://www.sharecg.com/v/33261/View/21/DAZ-Studio/Lightsword-Jedisword

    This thread has a list near the bottom of the first post...

    http://www.daz3d.com/forums/discussion/491/

  • Geminii23Geminii23 Posts: 1,327
    edited December 1969

    Wow! Thanks! I can't wait to play with all of these!

  • srieschsriesch Posts: 4,241
    edited December 1969

    fleetpp said:

    I found these at sharecg
    http://www.sharecg.com/v/61835/related/11/Poser/V3-Walk-Run-Poses

    They description says they were made using poser 2012 and not intended for DAZ, but I tested a couple and they work in DAZ


    Thanks!
  • mjc1016mjc1016 Posts: 15,001
    edited November 2012

    Tramp Graphics said:
    Jade Cheng said:
    mjc1016 said:
    Jade Cheng said:
    "robkelk", thx for replying but the file you gave me for the lights only contains a metal stand for ATTACHING lights, not the lights themselves. Download the file and you'll get what I mean...

    I'm waiting anxiously for the speakers... you actually don't need textures since I can make my own in Photoshop. Also, is your stuff licensed for commercial use or just for personal use?

    Thanks everyone! :D

    Yes, they are usable for commercial renders...

    Basically they are done, I just need to rig the movement on the mounting bracket, which I should be able to get done tonight. The box is UV mapped, but the speaker isn't, (won't take much time to map it...) and the color in the render is the 'base' color. All I was going to do was add a simple noise map to the displacement channel to add a little 'texture' to the box.

    Which would you prefer Poser PP2 or DS .duf format?

    DAZ format please.

    Thanks for doing custom work for me... I never expected it! If you don't mind, I'll texture it and post it here for everyone to enjoy and use.Do both formats, that way, those of us still using Daz 4.0 can use them too.

    Finally done...took a little longer than expected. I ended up having to rebuild it, twice as there were a couple of problems with the first mesh when I went rig it for posing.

    There's a DS4.5 duf format (it will be in the Daz section at ShareCG) and a cr2 version.


    Poser version: http://www.sharecg.com/v/65983/view/11/Poser/Speaker
    DS4.5 version: http://www.sharecg.com/v/65984/view/21/DAZ-Studio/Speaker

    speaker.jpg
    800 x 1000 - 317K
    Post edited by mjc1016 on
  • TheCastellanTheCastellan Posts: 700
    edited December 1969

    Any Christopher Eccleston morphs for M4?

  • SteveM17SteveM17 Posts: 971
    edited December 1969

    Where can I find a basic Santa suit for Genisis, or one that can be fitted to Genesis? So far I've only found the hat.
    Oh, and I'm using DS 4.0 by the way.

  • XandoryXandory Posts: 139
    edited December 1969

    Anyone know where I can find a nightshade plant or flower?

  • mjc1016mjc1016 Posts: 15,001
    edited November 2012

    Xandory said:
    Anyone know where I can find a nightshade plant or flower?

    Specific kind of nightshade?

    It's a very large plant family and there are several members that get the name...but they all look different.

    Post edited by mjc1016 on
  • XandoryXandory Posts: 139
    edited December 1969

    mjc1016 said:
    Xandory said:
    Anyone know where I can find a nightshade plant or flower?

    Specific kind of nightshade?

    It's a very large plant family and there are several members that get the name...but they all look different.

    Good point. :) Belladonna, deadly nightshade. It's for Christmas, ironically.

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    I'll see what I can do...probably a single stem (geometry) with 'billboard' leaves and geometry flowers with some berries....probably won't be done until the weekend.

  • XandoryXandory Posts: 139
    edited December 1969

    Wow, awesome! Thank you!! :D

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    I just tried to do a quick one using the Ivy generator in Blender, but I don't have enough memory to do it and run renders of the current project...so the belladonna needs to wait a while.

  • Jade ChengJade Cheng Posts: 0
    edited December 1969

    mjc1016 said:
    Tramp Graphics said:
    Jade Cheng said:
    mjc1016 said:
    Jade Cheng said:
    "robkelk", thx for replying but the file you gave me for the lights only contains a metal stand for ATTACHING lights, not the lights themselves. Download the file and you'll get what I mean...

    I'm waiting anxiously for the speakers... you actually don't need textures since I can make my own in Photoshop. Also, is your stuff licensed for commercial use or just for personal use?

    Thanks everyone! :D

    Yes, they are usable for commercial renders...

    Basically they are done, I just need to rig the movement on the mounting bracket, which I should be able to get done tonight. The box is UV mapped, but the speaker isn't, (won't take much time to map it...) and the color in the render is the 'base' color. All I was going to do was add a simple noise map to the displacement channel to add a little 'texture' to the box.

    Which would you prefer Poser PP2 or DS .duf format?


    Thanks for doing custom work for me... I never expected it! If you don't mind, I'll texture it and post it here for everyone to enjoy and use.

    Do both formats, that way, those of us still using Daz 4.0 can use them too.

    Finally done...took a little longer than expected. I ended up having to rebuild it, twice as there were a couple of problems with the first mesh when I went rig it for posing.

    There's a DS4.5 duf format (it will be in the Daz section at ShareCG) and a cr2 version.


    Poser version: http://www.sharecg.com/v/65983/view/11/Poser/Speaker
    DS4.5 version: http://www.sharecg.com/v/65984/view/21/DAZ-Studio/Speaker

    Thanks! :D

    Just what I needed.

This discussion has been closed.