Loading...
> >

Contact Vendors

bryanll1bryanll1 Posts: 141
in The Commons
Is there a way to contact vendors to ask specific questions about their products?

Comments

  • Widdershins StudioWiddershins Studio Posts: 556
    edited August 2015

    I'm not sure, but what I've done is put in a support ticket and they were kind enough to contact the vendor for me.

    Post edited by Widdershins Studio on
  • ScavengerScavenger Posts: 2,674

    Mostly, if you see them post in the forums, hit 'em up.. if you don't....you don't.

    The various ad threads are good places to check...or search for the product you have a question about.

  • ANGELREAPER1972ANGELREAPER1972 Posts: 4,560

    some are on facebook and or deviant art

  • mjc1016mjc1016 Posts: 15,001

    AntFarm, Jack Tomlin, Sickleyield, RawArt, Mec4D and a bunch of others are very frequent denizens of the forums...(yeah, I know, I'm leaving a bunch of regulars off the list...but those names were the first ones to pop into my head).

  • DzFireDzFire Posts: 1,473

    Most of us can be PM'd ;)

  • ScavengerScavenger Posts: 2,674
    DzFire said:

    Most of us can be PM'd ;)

    Only if someone can find your user name :D

  • bryanll1bryanll1 Posts: 141
    I'm looking for Rawart & Luthbel
  • ANGELREAPER1972ANGELREAPER1972 Posts: 4,560

    don't think I have a Luthbel link but here's some I have there are more 

    rawart's facebook page - https://www.facebook.com/RawArt3d?fref=ts

    DESIGN ANVIL  https://www.facebook.com/pages/DESIGN-ANVIL/427676333955561

    Sabby  https://www.facebook.com/Sabby3D

    Jack Tomalin (3D Artist)  https://www.facebook.com/pages/Jack-Tomalin-3D-Artist/169298263113899

    Look at my Hair https://www.facebook.com/LookAtMyHair

    Stonemason-DAZ3D  https://www.facebook.com/pages/Stonemason-DAZ3D/150354861674769?fref=pb&hc_location=profile_browser

    Slosh http://sloshwerks.deviantart.com/

    SickleYield http://sickleyield.deviantart.com/

     

     

  • bryanll1bryanll1 Posts: 141
    Thanks
  • Shortstuff81000Shortstuff81000 Posts: 7

    I'd like to contact outoftouch. Does anyone know how to get a hold of them? I've tried sending a PM, but I don't know their username, and I don't know how to search for them, either. sad I found them on Renderosity and sent them a message, but I'd prefer to talk to them here because this is where I purchased their product. smiley

  • FirstBastionFirstBastion Posts: 8,050

    PMs usually work,  you can also try to find their forum threads for their products in the "Commerical" section. 

    http://www.daz3d.com/forums/categories/daz-pa-commercial-products

  • LyonessLyoness Posts: 1,639
    Shortstuff81000 said:

    I'd like to contact outoftouch. Does anyone know how to get a hold of them? I've tried sending a PM, but I don't know their username, and I don't know how to search for them, either. sad I found them on Renderosity and sent them a message, but I'd prefer to talk to them here because this is where I purchased their product. smiley )

    Usually we don't care which site you contact us at.  Daz3d has messaging setup so you can always go there and send us a PM. (here is a link: http://www.daz3d.com/forums/messages/all) You can hunt for our names in the list. As PAs, you already know our names.

  • Shortstuff81000Shortstuff81000 Posts: 7
    Lyoness said:
    Shortstuff81000 said:

    I'd like to contact outoftouch. Does anyone know how to get a hold of them? I've tried sending a PM, but I don't know their username, and I don't know how to search for them, either. sad I found them on Renderosity and sent them a message, but I'd prefer to talk to them here because this is where I purchased their product. smiley )

    Usually we don't care which site you contact us at.  Daz3d has messaging setup so you can always go there and send us a PM. (here is a link: http://www.daz3d.com/forums/messages/all) You can hunt for our names in the list. As PAs, you already know our names.

    I've tried that. smiley Maybe there's a glitch in the system; when I try to send the message, I get an error message: "ValidateOneOrMoreArrayItemRequired". I also can't find the button to open the list anymore. The last time I wanted to send a PM was in June; before the site changed. laugh

  • Shortstuff81000Shortstuff81000 Posts: 7

    OK it's not a glitch. I just sent a PM to Lyoness. sad Hmmmm...

  • Digital Lite DesignDigital Lite Design Posts: 728
    Shortstuff81000 said:
    Lyoness said:
    Shortstuff81000 said:

    I'd like to contact outoftouch. Does anyone know how to get a hold of them? I've tried sending a PM, but I don't know their username, and I don't know how to search for them, either. sad I found them on Renderosity and sent them a message, but I'd prefer to talk to them here because this is where I purchased their product. smiley )

    Usually we don't care which site you contact us at.  Daz3d has messaging setup so you can always go there and send us a PM. (here is a link: http://www.daz3d.com/forums/messages/all) You can hunt for our names in the list. As PAs, you already know our names.

    I've tried that. smiley Maybe there's a glitch in the system; when I try to send the message, I get an error message: "ValidateOneOrMoreArrayItemRequired". I also can't find the button to open the list anymore. The last time I wanted to send a PM was in June; before the site changed. laugh

    When you start typing the name it should pop up.  I was PMing Orestes and his PA name had a space (and gave me the same error) , but the Forum name that popped up didn't.  So just double check and grab the name from the list as it shows there.  :)

     

     

  • Shortstuff81000Shortstuff81000 Posts: 7
    Digital Lite Design said:

    When you start typing the name it should pop up.  I was PMing Orestes and his PA name had a space (and gave me the same error) , but the Forum name that popped up didn't.  So just double check and grab the name from the list as it shows there.  :)

     

     

    Oh holy crap it worked! laugh I never would've considered that spaces would be in a user name! laugh  TYVM Digital Lite Design!!

  • Digital Lite DesignDigital Lite Design Posts: 728
    Shortstuff81000 said:
    Digital Lite Design said:

    When you start typing the name it should pop up.  I was PMing Orestes and his PA name had a space (and gave me the same error) , but the Forum name that popped up didn't.  So just double check and grab the name from the list as it shows there.  :)

     

     

    Oh holy crap it worked! laugh I never would've considered that spaces would be in a user name! laugh  TYVM Digital Lite Design!!

    LOL  Any time  :)

  • sboyd2kussboyd2kus Posts: 16

    Necro-ing this thread - it helped immensely and has saved me HOURS of research!

    Thanks, all!

    -Sharon

Sign In or Register to comment.