GENERAL FREEBIE REQUESTS Part 2

mjc1016 · February 2016

Ariaso said:

kyoto kid said:

...ShareCG?

Nah, it was a seperate website, and I remember learning about it from these forums many a moons ago. They were formerlly commercial, and then set free, and there were two packs I believe-- Jungle, and Coniferious.

Not sure if these are the ones you are looking for, but there are several nice sets here

http://3tdstudios.com/index.html

There is a Conifer Forest and Tropical Rainforset among others.

kyoto kid · February 2016

..wow, never heard of that site. Good you found them.

mjc1016 · February 2016

I've been using those for a while now...and every once in a while I convert some pieces to Studio native formats...and since it's CC-0, when I'm done, I'll probably post them at ShareCG.

AeonicB · February 2016

mjc1016 said:

Ariaso said:

kyoto kid said:

...ShareCG?

Nah, it was a seperate website, and I remember learning about it from these forums many a moons ago. They were formerlly commercial, and then set free, and there were two packs I believe-- Jungle, and Coniferious.

Not sure if these are the ones you are looking for, but there are several nice sets here

http://3tdstudios.com/index.html

There is a Conifer Forest and Tropical Rainforset among others.

Those are sweet too. NEver heard of it, but I'm getting them too! :) Thanks!

kyoto kid · February 2016

...I already have Ecomantics which has a nice variety of low poly tree and bush billboards that work well for background elements.

Also have a several of Predatron's and LisaB's plants for when I need more detailed flora in the foreground.

Charlie Judge · February 2016

mjc1016 said:

I've been using those for a while now...and every once in a while I convert some pieces to Studio native formats...and since it's CC-0, when I'm done, I'll probably post them at ShareCG.

Thanks,

They look good but I see thay are in collada format and designed for Torque 3D. How well do they import into DS?

mjc1016 · February 2016

I've been converting them to obj in Blender. And using them that way. Some of the plants have 2 'layers' and both show up in dae import into Studio. It's just easier to delete one in Blender than use the Geometry editor in Studio. Some need masks/transmaps generated (some have them, some don't...).

They aren't very difficult to use in Studio...and for the most part, the surfaces are named logically so if how you bring them in doesn't assign at least the diffuse map, it's not difficult to find and assign.

Also some of them will need to be rotated if brought in through dae/Collada imports.

Most of the trees are modeled with transmapped leaves, the shrubs are basic geometry and billboards and the grasses are mostly billboards...but not flat, usually at least two intersecting planes (4 surfaces, some are more). Other things like buildings are all geometry...low to mid poly counts. Rocks do subdived fairly nicely.

mauser1898gew_77dbe1a382 · February 2016

Does anyone make a free Coleman style 2 mantle lantern? Thank you. Jim

Saphirewild · February 2016

mjc1016 said:

I've been using those for a while now...and every once in a while I convert some pieces to Studio native formats...and since it's CC-0, when I'm done, I'll probably post them at ShareCG.

I will be the first to grab those once you get them set up in ShareCG :D

Charlie Judge · February 2016

Saphirewild said:

mjc1016 said:

I've been using those for a while now...and every once in a while I convert some pieces to Studio native formats...and since it's CC-0, when I'm done, I'll probably post them at ShareCG.

I will be the first to grab those once you get them set up in ShareCG :D

I'll grab them too.

Charlie Judge · February 2016

mauser1898gew_77dbe1a382 said:

Does anyone make a free Coleman style 2 mantle lantern? Thank you. Jim

Fairly inexpensive poser version: https://www.renderosity.com/mod/bcs/legendary-lanterns---poser-version/78238

Not exactly free (paid account or uploads required) nice with obj format: http://www.3dcadbrowser.com/download.aspx?3dmodel=66403

Fairly inexpensive with propane cylinder in obj format: http://www.turbosquid.com/3d-models/3d-model-of-camping-lantern/741711:

mjc1016 · February 2016

Here's a free one...(free registration required) and it needs to be converted (Yes, Blender is required for conversion).

http://www.blendswap.com/blends/view/40270

Kerya · February 2016

Xfrog has some 2d plants too: http://xfrog.com/category/samples.html

SteveM17 · February 2016

Can't find any poses for the Mil Dog that came free with DS 4.8. Just some simple ones would do, such as sitting and running.

Kerya · February 2016

SteveM17 said:

Can't find any poses for the Mil Dog that came free with DS 4.8. Just some simple ones would do, such as sitting and running.

http://www.sharecg.com/v/74024/

SteveM17 · February 2016

Kerya said:

SteveM17 said:

Can't find any poses for the Mil Dog that came free with DS 4.8. Just some simple ones would do, such as sitting and running.

http://www.sharecg.com/v/74024/

I've been on Sharecg and somehow managed to miss that! Thanks.

kellyannallen_8727de3d1c · February 2016

Hi, what I am looking for is hair, just different free styles of hair usable on either the Genesis 2 male/Female or the Genesis 3 version..... OR someone who can tell me how to actually MAKE hair.... I want my men to have LONG hair and at the moment, I am restricted to FREE stuff....

Thanks for any and all help....

Chohole · February 2016

kellyannallen_8727de3d1c said:

Hi, what I am looking for is hair, just different free styles of hair usable on either the Genesis 2 male/Female or the Genesis 3 version..... OR someone who can tell me how to actually MAKE hair.... I want my men to have LONG hair and at the moment, I am restricted to FREE stuff....

Thanks for any and all help....

Hair, Hair and more Hair

mjc1016 · February 2016

From Chohole's link...this is the Tutorial section (the link at the top seems to be redirecting to the wrong part of the thread).

http://www.daz3d.com/forums/discussion/comment/3026/#Comment_3026

Most of those tutorials are about paint hair after the render.

But a couple of the most important ones are the Ramwork's one on fitting hair and the LittleFox one on modelling too hair (the basics are the same for other hair...just the shapes and densities go up).

RAMWorks: http://www.daz3d.com/forums/discussion/1866/ramworks-tutorials-pp2-and-hr2-to-figure-painting-genesis-in-zbrush/p1

LittleFox: http://forum.runtimedna.com/showthread.php?14282

And I'm tracking down one more...

Kerya · February 2016

mjc1016 said:

From Chohole's link...this is the Tutorial section (the link at the top seems to be redirecting to the wrong part of the thread).

http://www.daz3d.com/forums/discussion/comment/3026/#Comment_3026

I am sorry - I still can't edit those messages, they are too long for the new forum software. I would have to create a new thread and split all those messages even farther (which would make editing a pain).

Here is the wiki: https://poserdazfreebies.miraheze.org/wiki/Hair/Hair_tutorials

I like Kozaburo's tutorial too - it's back to the basics and show them quite well: http://digitalbabes.jp/tutorial.zip

kyoto kid · February 2016

...anyone know if someone's created the dress Merida wears in the film Brave? Even an MFD texture would be nice.

Kerya · February 2016

kyoto kid said:

...anyone know if someone's created the dress Merida wears in the film Brave? Even an MFD texture would be nice.

http://www.sharecg.com/v/68125/

kyoto kid · February 2016

...beautiful, Thanks.

bill71az · February 2016

mjc1016 said:

patience55 said:

mjc1016 said:

patience55 said:

mjc1016 said:

patience55 said:

mjc1016 said:

Wolfmanjim said:

I would like Olympic style medals for V4. Someone posted one on Rendo, but they were, to be polite- hard to use.

Umm...probably find more response/likely takers if they were for a more modern figure.

Actually somebody posted one over at Renderosity.

I know which ones...and the OP was looking for alternates to those...

Well considering that he asked for one and that somebody took the time to make him one and posted it I think maybe it was worth a look at eh.

request by wolfmanjim
https://www.renderosity.com/mod/freestuff/olympic-medal/76021 ; by WILL_I_AM

.....

edit nm, takes the eyes awhile to focus and now I see the bold print.

Legacy rigging for the ancient figures is not an easy task and to make it workable yes, using a more modern figure is a good idea. There are V4 shapes for Genesis available: stuff can be auto-fitted to Genesis from V4. Life is easier then.

Yes...I've pretty much given up legacy rigging, and know that others have too...that's why I made my comment.

I'll use legacy for prop items, stuff like that, but clothing, no dice.

btw - I've downloaded the file in question and it's a Poser dynamic clothing item ... should be easy enough to use in Poser. Poser dynamics of course do not work as such in D/S.

However, if the OP is using D/S, it should be easy enough to resave the item as a D/S prop file, then make morphs for it for whichever pose is desired.

Or just parent the medal to a different necklace/chain...hide the existing one.

ModernWizard · February 2016

Looking for a lily light shade...something like this:

Or like this, but with just one lily:

Any help would be great.

--MW

Kerya · February 2016

You might get away with a vase?

https://www.renderosity.com/mod/freestuff/twisted-vase/60457

https://www.renderosity.com/mod/freestuff/exotic-vase-collection-vol-01/71742

http://www.sharecg.com/v/45686/browse/5/3D-Model/Vases

http://trekkiegrrrl.dk/mpp6.htm

ModernWizard · February 2016

Kerya said:

You might get away with a vase?

https://www.renderosity.com/mod/freestuff/twisted-vase/60457

https://www.renderosity.com/mod/freestuff/exotic-vase-collection-vol-01/71742

http://www.sharecg.com/v/45686/browse/5/3D-Model/Vases

http://trekkiegrrrl.dk/mpp6.htm

I'm sure I can cobble something together from one of these. Thank you for the suggestion, Kerya!

--MW

TesseractSpace · February 2016

I'm looking for a facepalm pose for Genesis 1 or V4. I get that I may have to adjust to fit my character. I just can't seem to find a decent facepalm that isn't for one of G2M's forms. And I can't seem to move the hand there without driving it through the neck.

Thanks much!

DollyGirl · February 2016

TesseractSpace said:

I'm looking for a facepalm pose for Genesis 1 or V4. I get that I may have to adjust to fit my character. I just can't seem to find a decent facepalm that isn't for one of G2M's forms. And I can't seem to move the hand there without driving it through the neck.

Thanks much!

http://www.sharecg.com/v/74072/gallery/21/DAZ-Studio/Body-Talk-Genesis-Hand-to-Mouth

TesseractSpace · February 2016

DollyGirl said:

TesseractSpace said:

I'm looking for a facepalm pose for Genesis 1 or V4. I get that I may have to adjust to fit my character. I just can't seem to find a decent facepalm that isn't for one of G2M's forms. And I can't seem to move the hand there without driving it through the neck.

Thanks much!

http://www.sharecg.com/v/74072/gallery/21/DAZ-Studio/Body-Talk-Genesis-Hand-to-Mouth

Perfect, thanks so much! Was searching and searching but for some reason all I could find was G2M poses

Notifications

GENERAL FREEBIE REQUESTS Part 2

Comments

Adding to Cart…