General Freebie Requests

1121315171850

Comments

  • ChoholeChohole Posts: 33,604
    edited December 1969

    Or here, and get them straight from his website, and more besides. Not posable though.

    http://www.toucan.co.jp/3DCGE.html

  • robkelkrobkelk Posts: 3,259
    edited September 2012

    Dollygirl said:
    Has anyone seen any ocean fish which are daz compatible and not NOR non-commercial use only?

    Did you try this page?
    http://www.planit3d.com/source/meshes_files/aquatics01.html
    Refresh my memory, please - how do we convert 3DS format files to something Daz Studio can read?

    (I know there's an easy way, but I've forgotten just what it is...)

    Post edited by robkelk on
  • DollyGirlDollyGirl Posts: 2,656
    edited December 1969

    robkelk said:
    Dollygirl said:
    Has anyone seen any ocean fish which are daz compatible and not NOR non-commercial use only?

    Did you try this page?
    http://www.planit3d.com/source/meshes_files/aquatics01.html


    Refresh my memory, please - how do we convert 3DS format files to something Daz Studio can read?

    (I know there's an easy way, but I've forgotten just what it is...)

    You can use the following free software to convert the 3ds format to obj

    https://sites.google.com/site/poseray/

    Bryce can convert as well as Carrara. If you have Poser you can load the 3ds file directly into the scene.

  • SkirikiSkiriki Posts: 4,975
    edited December 1969

    Hexagon! Open with it, then send to DAZ Studio.

  • salterdsalterd Posts: 1
    edited December 1969

    Hello All,

    Been away for quite a while, but am happy to see all of you! Exciting to see how organized all of this is. I love it!

    I have a personal request for a dressmaker's mannequin for Poser. If you need a figure as a basis, V4 would be a good one.

    Thanks so much and looking forward to catching up with all of you,
    --minx

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    Dollygirl said:
    robkelk said:
    Dollygirl said:
    Has anyone seen any ocean fish which are daz compatible and not NOR non-commercial use only?

    Did you try this page?
    http://www.planit3d.com/source/meshes_files/aquatics01.html


    Refresh my memory, please - how do we convert 3DS format files to something Daz Studio can read?

    (I know there's an easy way, but I've forgotten just what it is...)

    You can use the following free software to convert the 3ds format to obj

    https://sites.google.com/site/poseray/

    Bryce can convert as well as Carrara. If you have Poser you can load the 3ds file directly into the scene.

    Blender can convert them.

    And there's a freebie viewer app...Propviewer

    http://www.sharecg.com/v/47408/View/11/Poser/PropViewer-3.2

    That can load several formats and then output an obj or even a pp2 file.

  • KeryaKerya Posts: 10,943
    edited December 1969

    salterd said:
    Hello All,

    Been away for quite a while, but am happy to see all of you! Exciting to see how organized all of this is. I love it!

    I have a personal request for a dressmaker's mannequin for Poser. If you need a figure as a basis, V4 would be a good one.

    Thanks so much and looking forward to catching up with all of you,
    --minx

    Wasn't there on on Ness's page?
    The problem is I can't get the link to work. He had some security measures, so you couldn't just link to his page ... it was something about having to go through the forums (but with them renamed to forumarchive, that one doesn't work) ...
    http://www.nessrepros.co.uk/

  • robkelkrobkelk Posts: 3,259
    edited December 1969

    I need some "panicked" poses for M4 and V4 that can be used with the Creature morphs. Are there any ready-made out there?

  • SkirikiSkiriki Posts: 4,975
    edited December 1969

    Check out Structure's poses or Freeposes.net -- I seem to recall that I downloaded some from the latter.

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    Kerya said:
    salterd said:
    Hello All,

    Been away for quite a while, but am happy to see all of you! Exciting to see how organized all of this is. I love it!

    I have a personal request for a dressmaker's mannequin for Poser. If you need a figure as a basis, V4 would be a good one.

    Thanks so much and looking forward to catching up with all of you,
    --minx

    Wasn't there on on Ness's page?
    The problem is I can't get the link to work. He had some security measures, so you couldn't just link to his page ... it was something about having to go through the forums (but with them renamed to forumarchive, that one doesn't work) ...
    http://www.nessrepros.co.uk/

    The link I could get working was

    http://nessrepros.co.uk/index.php

    And the dressmaker dummy is on the Needlework page and is part of Needlework Set 2.

  • Tramp GraphicsTramp Graphics Posts: 2,408
    edited October 2012

    Anyone know where I can find some decent Halloween costumes for male characters and child characters? They need to be Genesis compatible. I looked on Renderocity and ShareCG, but really didn't find anything useful. I've got costumes for my two of my ladies, but none for the guys, nor my tomboy or the toddler (a little boy).

    Post edited by Tramp Graphics on
  • robkelkrobkelk Posts: 3,259
    edited December 1969

    Skiriki said:
    Check out Structure's poses or Freeposes.net -- I seem to recall that I downloaded some from the latter.

    Thanks! Now that you've pointed it out, I found a suitable set at Freeposes.
  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    Anyone know where I can find some decent Halloween costumes for male characters and child characters? They need to be Genesis compatible. I looked on Renderocity and ShareCG, but really didn't find anything useful. I've got costumes for my two of my ladies, but none for the guys, nor my tomboy or the toddler (a little boy).

    You mean you don't want to put them in slut-wear?

    Short of the 'super suit'/bodysuit with one of the many 'superhero' textures floating around...I can think of much.

    Try joequick's stuff at ShareCG for superhero stuff.

    http://www.sharecg.com/pf/full_uploads.php?pf_user_name=joequick

    And Atrion has some more textures for the bodysuits...

    http://www.sharecg.com/pf/full_uploads.php?pf_user_name=atrion666

    Uzilite has a great cape...

    http://www.renderosity.com/mod/freestuff/details.php?item_id=62513

    The bodysuits should autofit well, the cape, not sure...

  • Tramp GraphicsTramp Graphics Posts: 2,408
    edited October 2012

    mjc1016 said:
    Anyone know where I can find some decent Halloween costumes for male characters and child characters? They need to be Genesis compatible. I looked on Renderocity and ShareCG, but really didn't find anything useful. I've got costumes for my two of my ladies, but none for the guys, nor my tomboy or the toddler (a little boy).

    You mean you don't want to put them in slut-wear?

    Short of the 'super suit'/bodysuit with one of the many 'superhero' textures floating around...I can think of much.

    Try joequick's stuff at ShareCG for superhero stuff.

    http://www.sharecg.com/pf/full_uploads.php?pf_user_name=joequick

    And Atrion has some more textures for the bodysuits...

    http://www.sharecg.com/pf/full_uploads.php?pf_user_name=atrion666

    Uzilite has a great cape...

    http://www.renderosity.com/mod/freestuff/details.php?item_id=62513

    The bodysuits should autofit well, the cape, not sure...

    Actually, I'm looking for more classic "monster" types, particularly for Marc and little Chris. Finding costumes for Tommie and Kageto are also tough, because, although Tommie is a girl (and a very cute one at that), she's not a "girly girl" so the typical feminine costumes don't suit her, and, well Kageto's a traditional Japanese Shinobi already, so, while his "work gear" wouldn't be "out of place" (it already is a costume), it doesn't fit the Halloween theme, and I really want to take him "out of his comfort zone" while still maintaining his character. It's for the Monster Mash contest. I definitely don't want "superhero" chique.

    Post edited by Tramp Graphics on
  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    Adam Thwaite's has a werewolf morph for Genesis over at http://www.most-digital-creations.com/ (warning:some content there can be risque)

  • Tramp GraphicsTramp Graphics Posts: 2,408
    edited December 1969

    mjc1016 said:
    Adam Thwaite's has a werewolf morph for Genesis over at http://www.most-digital-creations.com/ (warning:some content there can be risque)
    I know, but I'm not looking for morphs that would change the actual characters. I'm looking for costumes to dress up the characters for Halloween.
  • KeryaKerya Posts: 10,943
    edited December 1969

    mjc1016 said:
    Kerya said:
    salterd said:
    Hello All,

    Been away for quite a while, but am happy to see all of you! Exciting to see how organized all of this is. I love it!

    I have a personal request for a dressmaker's mannequin for Poser. If you need a figure as a basis, V4 would be a good one.

    Thanks so much and looking forward to catching up with all of you,
    --minx

    Wasn't there on on Ness's page?
    The problem is I can't get the link to work. He had some security measures, so you couldn't just link to his page ... it was something about having to go through the forums (but with them renamed to forumarchive, that one doesn't work) ...
    http://www.nessrepros.co.uk/

    The link I could get working was

    http://nessrepros.co.uk/index.php

    And the dressmaker dummy is on the Needlework page and is part of Needlework Set 2.

    "Permission has not been granted to link to this site!"
    No go for me ... :(

  • DollyGirlDollyGirl Posts: 2,656
    edited December 1969

    mjc1016 said:
    Adam Thwaite's has a werewolf morph for Genesis over at http://www.most-digital-creations.com/ (warning:some content there can be risque)
    I know, but I'm not looking for morphs that would change the actual characters. I'm looking for costumes to dress up the characters for Halloween.

    If you type in Mask in the search of either Rendo or Share you will get some really nice options. Share has a scary rabbit mask and Rendo has some asian monster masks. Then to complete the outfits you can use second skins or go through the runtime closest and find bits and pieces. A cloak, bodysuit what ever. This is how we dressed up for Halloween when I was a kid. To poor to buy a costume.

    If your characters are based upon M4 or M3 there is a really nice predator set at Share. Just type in predator in the search box.

  • Tramp GraphicsTramp Graphics Posts: 2,408
    edited December 1969

    Dollygirl said:
    mjc1016 said:
    Adam Thwaite's has a werewolf morph for Genesis over at http://www.most-digital-creations.com/ (warning:some content there can be risque)
    I know, but I'm not looking for morphs that would change the actual characters. I'm looking for costumes to dress up the characters for Halloween.

    If you type in Mask in the search of either Rendo or Share you will get some really nice options. Share has a scary rabbit mask and Rendo has some asian monster masks. Then to complete the outfits you can use second skins or go through the runtime closest and find bits and pieces. A cloak, bodysuit what ever. This is how we dressed up for Halloween when I was a kid. To poor to buy a costume.

    If your characters are based upon M4 or M3 there is a really nice predator set at Share. Just type in predator in the search box.All of my characters are based upon Genesis. I did the same for costumes growing up too. Still do.

  • Eustace ScrubbEustace Scrubb Posts: 2,698
    edited December 1969

    Kerya said:
    mjc1016 said:
    Kerya said:
    salterd said:
    I have a personal request for a dressmaker's mannequin for Poser. If you need a figure as a basis, V4 would be a good one.
    --minx

    Wasn't there on on Ness's page?
    http://www.nessrepros.co.uk/

    The link I could get working was

    http://nessrepros.co.uk/index.php

    And the dressmaker dummy is on the Needlework page and is part of Needlework Set 2.
    "Permission has not been granted to link to this site!"
    No go for me ... :(

    I thought maybe opening it in a tab first opened in the DAZ fora would do it, but no dice.
    There's a slightly older, more generic model at Emperor Ken's World > 3D Content Downloads, second from the bottom under the cuckoo clock.

  • Serene NightSerene Night Posts: 17,609
    edited December 1969

    Dollygirl said:
    Has anyone seen any ocean fish which are daz compatible and not NOR non-commercial use only?

    Did you try this page?
    http://www.planit3d.com/source/meshes_files/aquatics01.html

    No, thanks Dollygirl. That was really helpful!

  • mjc1016mjc1016 Posts: 15,001
    edited December 1969

    For the Ness site, copy and paste the address into a new tab...that way there is no referrer attached to it...and that's what the script on his site is doing, shunting all incoming hits with a referrer to that 'no access' page.

  • SkirikiSkiriki Posts: 4,975
    edited October 2012

    Yes, but it also shuts the links inside his page. I copy-pasted a fresh link to his page, which took me to the front page, and then tried to click on link shown and it says no access. :(

    Edit: interesting, it is browser-dependant. Trying with Opera? Nope. Firefox? Yes. And I have much more permissive setup for Opera...

    Post edited by Skiriki on
  • DavidGBDavidGB Posts: 565
    edited December 1969

    I have a freebie request for a script that will work with DS4.5Tthere's a little ask version and a big ask version. I'll be more than happy with the little ask version, but will throw in the big ask version on the off chance.

    I need a script that will give me the use of my folder favorites back. The folder favorites are each single line dsa scripts sitting in a particular folder in my DS library each of which will cause the content library pane, in View as List or Tree modes, to jump to the folder named in the script. I also had them as cutom actions in a menu so I could just click to send the library to a particular folder from the menu rather than first having to navigate to the folder where the favorites scripts are. The scripts were made in DS3 with Netherworks Folder Favorites product. In DS4 the product's script to create new favorites didn't work any more, but at least my existing folder scripts and actions still worked, and I could hand write new ones simply by taking an existing one and just changing the path in the script to another folder and saving the edited script.

    In DS4.5 the existing folder scripts no longer work and just produce an error message.

    So, the little ask:

    Simply, this is the script in an existing script that worked in DS3 and 4 but errors in DS4.5 rather than sending the content library pane to the named directory (some are to folders in assorted Poser Runtimes, others are to folders in a DS3 content and the DS4 My Library):

    MainWindow.getPaneMgr().findPane("DzLibraryPane").setCurrentFolder("F:/Curious Labs/Poser 6/runtime/libraries/character/! Hair");

    What is the script line to do this in DS4.5?

    If sombeody can tell me that, that will do, and I can edit all the existing folder scripts and hand write new ones. I would be very, very grateful for that.

    The big ask version would be for a script that would work as follows:

    After having been turned into a custom action, calling the script would create, in a specified My Library folder, a script as described above to whatever folder was the selected one in the content library pane when the action was called (i.e. it would make new favorite folder scripts for me rather than me having to write them in the Svript IDE myself ... but as I say, I'd be quite happy just knowing how to write them; having a script to write those scripts would just be nice, not essential).

  • Eustace ScrubbEustace Scrubb Posts: 2,698
    edited December 1969

    Does anyone have, or can anyone make, a Venus de Milo pose for V3 or V4 (or Genesis)? For that matter, even one for Posette would be all right. I just need a Venus de Milo for a render. Proper credit will be given (it's for the MMHB challenge...)

  • robkelkrobkelk Posts: 3,259
    edited December 1969

    Skiriki said:
    Yes, but it also shuts the links inside his page. I copy-pasted a fresh link to his page, which took me to the front page, and then tried to click on link shown and it says no access. :(

    Edit: interesting, it is browser-dependant. Trying with Opera? Nope. Firefox? Yes. And I have much more permissive setup for Opera...


    Odd - I can't access anything but the front page with SeaMonkey (which is supposed to be Firefox-compatible) or Internet Explorer. And I tried with both current and legacy versions of IE.
  • ChoholeChohole Posts: 33,604
    edited December 1969

    I did email The Ness, and he said that he knows there is a probelem, is not tech savvy enough to know how to sort it out himself, but is hoping that his site will reappear someitme in the future, with a new host.

  • SteveM17SteveM17 Posts: 972
    edited December 1969

    mjc1016 said:
    Adam Thwaite's has a werewolf morph for Genesis over at http://www.most-digital-creations.com/ (warning:some content there can be risque)
    I know, but I'm not looking for morphs that would change the actual characters. I'm looking for costumes to dress up the characters for Halloween.

    Does this need Evolution or some other extra as well? I'm sure I tried it with just basic Genesis and it didn't work.

    Does anyone know where I could find some fur for Genesis? Werewolf style? I can warp his face using other morphs.

  • SickleYieldSickleYield Posts: 7,633
    edited December 1969

    Does anyone have, or can anyone make, a Venus de Milo pose for V3 or V4 (or Genesis)? For that matter, even one for Posette would be all right. I just need a Venus de Milo for a render. Proper credit will be given (it's for the MMHB challenge...)

    I can do a Genesis one if you haven't been helped. Are you transmapping out the arms, or what do you feel they should be doing?

  • ChoholeChohole Posts: 33,604
    edited December 1969

    Does anyone have, or can anyone make, a Venus de Milo pose for V3 or V4 (or Genesis)? For that matter, even one for Posette would be all right. I just need a Venus de Milo for a render. Proper credit will be given (it's for the MMHB challenge...)

    I can do a Genesis one if you haven't been helped. Are you transmapping out the arms, or what do you feel they should be doing?

    And don't forget, in order to qualify for the freebie challenge it has to be free for everyone to download.

This discussion has been closed.