hello where/how i found génitalia for genesis 3, i need them for g3 olympia ,victoria , bethany and other .

thank you !

I'm seeing a lot of couple poses out there for Genesis or Michael and Victoria, but I can't find any couple poses in the DAZ store that are made for Hiro 3 and Aiko 3. Why is that?

If someone could take care of the problem and make some couple poses for Hiro 3 and Aiko 3, I would greatly appreciate it!

The Bonus Content is what it says, right. It is for the Figure Rune7. The reason behind it is the following:

Every "special" Figure like Rune, Olympia, Teen Josie ect. has a slightly different UV Layout.
(Victoria 7 is an exeption, she has a very close UV Setup to the G3F Base Figure.)

So let's say you wanna use a Olympia Skin on the base G3F Figure or vise versa. You can do that, but there wil be
visible Seams where the Texture dosen't fit the Model. (IF you leave the original UV Set in the Surface Properties!) 
In Example: You have Olympia or any other "special" Figure in the scene selcted and then apply a Skin from an different Character.
It will fit perfectly, because with the applied Skin, the UV Set will also be changed. That means, you have now Olympia, but with the UV Set
from Victoria7 i.e.
(This is the reason why the full Skin Textures will work on any G3F Figure)

But not with the LIE Presets!

Let's say you have Rune7 in the scene,which has its own different UV Set and wanna use her original Material (also Makeups),
the LIE Textures must have also the Rune7 UV Set!
If you change the UV Set from Rune to G3F Base, the original Rune Texture will be distorted!
This Limitation occurs only with the LIE Presets and is also statet in the Product description.
(LIE Presets only compatible with G3F Base and Victoria 7)

Hope this was not too complicated writen and clears the question about it.

Thanks!

very nice! I would like to know the outfit and accessories in the black widow inspired second pic.

Thanks I use the Victoria 6 fsuperbodysuit from 3d wizard, on Victoria7 - guns from Smay, Tactical Gun.

Gopherus #3

Northern Terrace Kitchen Utensils 
Queen Anne Parlor Furniture Part One 
Speed Lights Outdoor Light Set 1 
V4.2 Bodysuit 

A Double Double with Onions and a Diet Decaf, Sir

Sir Rodney loves to entertain.  And when the weather is particularly good he has his servants take the parlor furniture outside so that his guests can comfortably enjoy the planned sport of the day. But why is it that just when the entertainment is at its height, the servants choose to interrupt with snacks?

Gosh, I wish I had a servant that would interrupt me with snacks. You made me hungry now, Gopherus.

Not sure what would be in that folder - the name, other than Victoria 4, isn't informative. You may need to go to users/my name/documents/daz 3d/studio/my library/Runtime/Libraries/!DAZ and double-click the DzCreateExPFiles-v4 command for your OS in order for the morph sto be available, and if you aren't using Power Loader you will then need to go to the Content Library Poser Formats>My Library>Pose?DAz's Victroia 4>Morph Injections and use the INJ All poses.

Gopherus #3

Northern Terrace Kitchen Utensils 
Queen Anne Parlor Furniture Part One 
Speed Lights Outdoor Light Set 1 
V4.2 Bodysuit 

A Double Double with Onions and a Diet Decaf, Sir

Sir Rodney loves to entertain.  And when the weather is particularly good he has his servants take the parlor furniture outside so that his guests can comfortably enjoy the planned sport of the day. But why is it that just when the entertainment is at its height, the servants choose to interrupt with snacks?

Your .cr2 question is beyond my limited hacking knowledge,  but JoePublic put together a tutorial on Poserizing Victoria 5.  This also works on Genesis 2 figures, and I  think it will accomplish your goal of loading an Aiko 6 Poser figure with the correct UVs out of the box....

https://www.renderosity.com/mod/forumpro/?thread_id=2874212

Note the the "Speed" section can be neglected if  that isn't an issue for you, and that the figure is initially loaded via the DSON Importer, but is a native Poser figure when finished...

I had a look at the instruction but had no idea what he was talking about. DSON importer used to work for me but now it only reports errors. So I am using DS4.6 to create cr2 files for poser to load directly.

I used to rewrite the cr2 file for A4 to load an A4-obj instead of a V4 plus A4 morph for speed. Then I found out that the magnets for pose control don't works well with changed verticles. Fortunately genesis uses weightmaps so I believe I can load any morphed obj without losing control.

A good rule of thumb on promos is to have 2-4+ "art" renders, with ideally the one that promotes that product primarily as your Main Promo, then however many "WYSIWYG" promos - show off every item included, preferably with greyscale images if it's an original geometry product as well.

As for making sure an item is ready for QA, here's things to look for: No texture seams you can find, no pokethru on clothing items (solve either with weight map tweaking or JCM's), files saved to their proper places, and no flaws in the geometry (missing polygons, unwelded seams, inverted normals, etc).

Once an item is submitted, it gets examined by the Review Committee. Note that products from existing PA's take precedence, and there are currently more than 600 PA's (though I doubt more than about 350 are actually very active). If it is not accepted, they may or may not say why, and honestly sometimes the why is "We just don't think that will sell".

If it is accepted, then it goes through QA. The DAZ testers have a rather explicit list of things to look for and will test the daylights out of the product. If they find errors, they will send you a message with a list of mistakes they found, and usually with renders pointing out said mistakes so you can see what they saw. You make the fixes, send them back, and your tester now tests the corrected files. Rinse and repeat until no errors are found in final testing.

Once an item passes QA, then it goes through various other reviews - art, for example, usually a formality since your promos are part of why a product is or is not accepted, and bad promos will be pointed out before it ever reaches testing, and a run-through over the promo text.

After it goes through all of that, it can still be between 1-4 weeks or even longer before it goes live in the store - Marketing tries (though does not always succeed) to match item themes on any given day.

If you seek to do a buyout, that is part of the product submission - tell DAZ how much you are willing to accept for the product (a rule of thumb is to look at how long of actual work it took, and use that to base your asking price). I will not divulge the typical asking prices, but if you ask for too low DAZ may bump it up, while if you ask for too much they might actually stop looking at the product before even getting to the promos. Basically don't undervalue yourself too much, but don't get greedy, either.

You set your own product's price. Again, a good rule of thumb is to look at something in the store similar in content to yours, even if it's a different style. If you have a female clothing set that's four pieces and has FBM's to match 30 of the FBM's (counting general shapes like Voluptuous, and specific shapes like Victoria 7), then look at the average price of clothing sets with four pieces and about 30 FBM's. If you think that set looks better than yours, charge a slightly lower price. If yours includes more (more pieces, multiple textures, etc), charge slightly lower. As with buyout prices, don't undervalue yourself but don't get greedy - a morph and texture set for G3F will not sell at $75, and if it's quality charging $10 is seriously undervaluing your work.

I just got around to playing with this bundle and she is really cute. Raiya has always been one of my favorite PA from her V4, V5 and V6 characters and I love what she is doing with V7.  Just wanted to shout her out.

I know I've seen these pieces but..... Anybody know the bodysuit, the shoes and the bracelet from this promo?

http://www.daz3d.com/bd-rajni-for-victoria-7-hd

Try doing a google search for Bareback rider and look at the images: https://www.google.com/search?q=bareback+rider&biw=1536&bih=749&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwjo_brs3cXSAhVq2IMKHbqBB8YQsAQIJQ#imgdii=YmoWpxivEYJ84M:&imgrc=bJsTviL0OLBkYM:

Would these poses help? http://www.daz3d.com/victoria-4-equestrian

 

This is actually the pose set that im using, http://www.daz3d.com/da-horse-and-rider-poses . The forward horse pose in the promo shot is actually the pose that im using. Yah ill check out google eventually, I just wanted to be social and talk some peeps .

Try doing a google search for Bareback rider and look at the images: https://www.google.com/search?q=bareback+rider&biw=1536&bih=749&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwjo_brs3cXSAhVq2IMKHbqBB8YQsAQIJQ#imgdii=YmoWpxivEYJ84M:&imgrc=bJsTviL0OLBkYM:

Would these poses help? http://www.daz3d.com/victoria-4-equestrian

Hello!  Just got a new laptop and threw in my old hard drive (which had all runtimes) and I have to redownload all the "Smart Content" only files.  The only one I remember is FWSA Eliya HD for Victoria 7, which is one of my favorite characters ever.

Is there a way to search through your content (via web or DS) to find the products that are smart content only?  So I can make sure to re-download them?

Thanks in advance!  Sorry if such a noob question.  

- G

Notes

• This product includes:
  • 1 DSON Core Installer

• Additional Products used in Promo Images:
  • Victoria 7

I'd say V7 as it says additional products used: if not, then no idea.

Your .cr2 question is beyond my limited hacking knowledge,  but JoePublic put together a tutorial on Poserizing Victoria 5.  This also works on Genesis 2 figures, and I  think it will accomplish your goal of loading an Aiko 6 Poser figure with the correct UVs out of the box....

https://www.renderosity.com/mod/forumpro/?thread_id=2874212

Note the the "Speed" section can be neglected if  that isn't an issue for you, and that the figure is initially loaded via the DSON Importer, but is a native Poser figure when finished...

That is for Victoria 4, Michael 4 and Genesis 1.

Yeah, I'm waiting as well to fill out my roster, too.  Victoria, Micheal, Bethany, and Aiko were on sale recently, as was Monique, but I'm waiting for Lee, Ivan & Olympia myself.

Arrggghhhhh. Made my first 'painted' character and have always used the presets that come with the "So-and-so for Victoria X' figures.

I've always assumed that if I grab the Material for one figure and use it with the next, I could have shape issues...

Using FaceGen by the way and wanting to apply make up and nail polish to some originally crafted persons.

Did a search for nail polish and only had 1 hit. but it looks like the ultimate result. lol

http://www.daz3d.com/hands-for-genesis-3-female-s

That looks like a definite must have.

http://www.daz3d.com/l-i-e-make-up-set-for-genesis-3-female-s

Looking for a one-click solution to add make up (light foundation, lipstick and eye-liner) and also paint the nails.

These look like a one-two punch.(HOPING THEY GO ON SALE [and the headwrap, I remeber bookmarking])

Anyone agree?

Better ideas?

I've been playing around with some ideas for nails myself.  There isn't really all that much in the store.  However, you do know you can use shaders on nails, yes?  In a pinch, car paint shaders work really well for fingernails.  So do some of the ceramic shaders and other glossy type shaders in various products.  Take a look at what shaders you have that are really glossy and you might find some in your product library that you can use.

Arrggghhhhh. Made my first 'painted' character and have always used the presets that come with the "So-and-so for Victoria X' figures.

I've always assumed that if I grab the Material for one figure and use it with the next, I could have shape issues...

Using FaceGen by the way and wanting to apply make up and nail polish to some originally crafted persons.

Did a search for nail polish and only had 1 hit. but it looks like the ultimate result. lol

http://www.daz3d.com/hands-for-genesis-3-female-s

That looks like a definite must have.

http://www.daz3d.com/l-i-e-make-up-set-for-genesis-3-female-s

Looking for a one-click solution to add make up (light foundation, lipstick and eye-liner) and also paint the nails.

These look like a one-two punch.(HOPING THEY GO ON SALE [and the headwrap, I remeber bookmarking])

Anyone agree?

Better ideas?