Question - Have you ever tried to paint a figure?

What challenges did you face?

 

Well, with this guy, the challenge is reaching inside all the little crevices to get the details, like his gold chain under his lekku. 

Very good!  Did you air brush that?

Base coats are airbrushed, with that gentle highlight on the pants, but I've moved on to brush work. All the texture in the skin has been done via a glazing technique. Lots and lots left to go! I think I'm about 6-8 hours of work in so far, and not even done with the skin yet. I've been painting him up on-stream. You can check out the VoDs if you're interested: https://www.twitch.tv/hana_hanabi/videos/all Thursdays at 5:30pm Central and Sundays at 3pm central, although those times will be changing soon when I start my new schedule at work in Feb.

I've decided this year I need to render stuff I buy and not just stockpile it. I picked up Northern Winter Village yesterday. I like what I'm seeing. It comes with a 3DL or Iray scene with five buildings and a mountain surround. The village has pine trees, steps, a central square, street lamps, and paths through snow mounds. It reminds me of some of the skiing villages I've been at.  It renders with a light that's similar to late afternoon at northern latitudes - the sky is still blue but the lights have come on and are casting a glow on the snow. There is no sky with the set, so I used one from Eternal White Skydome and HDRI which is a fitting companion. 

I wanted to also use winter clothes I've picked up the past 6 months. Karen 7 has on Autumn Jackets for Genesis 3 Male(s) and Female(s), JeanZ for Genesis 3, Comfeez Boots for Genesis 3 Female(s), gloves from Nomad for Genesis 3 Male(s) and Female(s), and a knit cap from City Dweller Outfit for Genesis 3 Female(s). The hair is Fantasia Hair for Genesis 3 Female(s). I had to play around with the hair and cap morphs to mostly hide the hair sticking through the cap. The same for the boots and jeans as I wanted the tuck in look (easier if you stick with the jeans outside the boots). The gloves also needed attention as they widen to an extra large cuff - I used the geometry editor to select the parts of the gloves covered by the coat sleeves and hid the polygons. All in all it went together well. 

Mely3D is one of the PA's and I have their French Ski Resort. I plan to put the two together although I'll probably have to use the scene optimizer (mostly because I know the ski resort is memory intensive). For just the winter village, it did drop me to CPU rendering but the times were not bad - about an hour for 1200 by 960.

I have some 4000+ products in my runtime and when I do a thematic scene like this, I constantly find out how much I'm missing. If it was summer time, I'd have no problem, but cold weather has fewer offerings.

Here's two different Iray renders (click on images for larger versions).

 

 

You're welcome! I haven't taken them out in a while, myself. ​As to access, I think you fly in to those pods where the arches meet the central disc. There's a recessed opening, and a scaled-down (1/120th) traffikar or Dystopian Aircar would just fit.

1. they are different in angle to the camera resulting in slight different size and shape of the 2D visual

2. there are the already described differences in the shadows and the reflections from one face on the other already mentioned, the shadows I woudl as well thing are caused from the different angles

3. the left faces seems to have a slightly higher gloss especially on the nose ridge, I can't say if that is caused by the small difference they have in position or if that is what is caused by your indicated difference

4. the left face seems to be a tiny bit lighter in colour regarding the central facial area

I finally got Sakura to work--now her eyes, eyelashes and eyebrows are showing up when I installed through Connect rather than DIM... I think she's adorable, but I'm definitely going into that uncanny valley with this one. Tried out Mec4D's Central Park HDRI (plus extra lights) with it and a drop of iPad postwork (still sick in bed with flu!) Central Park was my childhood stomping ground so I couldn't pass that up when it was on sale. I see her products are on sale again, but I really miss those loyalty rewards...

Very cute, Wonderland! So sorry to hear you've got the flu. We spent a good chunk of December sick with Influenza A. My entire family had it at the same time. Guess who was sick and got to stay up with sick kids? So glad it's over (it really wrecked Christmas this year!)

Thanks @Llynara. I got sick a couple days after Christmas so missed New Years Eve and am STILL sick! Horrible cough, asthma, just started antibiotics. When I went to the doctor, she coughed in my face! Everyone seems to be sick in LA and it was 70/80 degrees until a few days ago.Raining yesterday and today. Sorry, so OT here, but I discovered something cool because of this: Himalayan Pink Salt lamps! (Available on Amazon.) Great for people who spend a lot of time in front of the computer. They are gorgeous and help remove EMFs...

Errrr. Antibiotics with a viral infection?

Yeah, I have bronchitis and the first thing I researched was treatments - and antibiotics aren't really helpful for viral infections. 

I finally got Sakura to work--now her eyes, eyelashes and eyebrows are showing up when I installed through Connect rather than DIM... I think she's adorable, but I'm definitely going into that uncanny valley with this one. Tried out Mec4D's Central Park HDRI (plus extra lights) with it and a drop of iPad postwork (still sick in bed with flu!) Central Park was my childhood stomping ground so I couldn't pass that up when it was on sale. I see her products are on sale again, but I really miss those loyalty rewards...

Very cute, Wonderland! So sorry to hear you've got the flu. We spent a good chunk of December sick with Influenza A. My entire family had it at the same time. Guess who was sick and got to stay up with sick kids? So glad it's over (it really wrecked Christmas this year!)

Thanks @Llynara. I got sick a couple days after Christmas so missed New Years Eve and am STILL sick! Horrible cough, asthma, just started antibiotics. When I went to the doctor, she coughed in my face! Everyone seems to be sick in LA and it was 70/80 degrees until a few days ago.Raining yesterday and today. Sorry, so OT here, but I discovered something cool because of this: Himalayan Pink Salt lamps! (Available on Amazon.) Great for people who spend a lot of time in front of the computer. They are gorgeous and help remove EMFs...

Errrr. Antibiotics with a viral infection?

I finally got Sakura to work--now her eyes, eyelashes and eyebrows are showing up when I installed through Connect rather than DIM... I think she's adorable, but I'm definitely going into that uncanny valley with this one. Tried out Mec4D's Central Park HDRI (plus extra lights) with it and a drop of iPad postwork (still sick in bed with flu!) Central Park was my childhood stomping ground so I couldn't pass that up when it was on sale. I see her products are on sale again, but I really miss those loyalty rewards...

Very cute, Wonderland! So sorry to hear you've got the flu. We spent a good chunk of December sick with Influenza A. My entire family had it at the same time. Guess who was sick and got to stay up with sick kids? So glad it's over (it really wrecked Christmas this year!)

Thanks @Llynara. I got sick a couple days after Christmas so missed New Years Eve and am STILL sick! Horrible cough, asthma, just started antibiotics. When I went to the doctor, she coughed in my face! Everyone seems to be sick in LA and it was 70/80 degrees until a few days ago.Raining yesterday and today. Sorry, so OT here, but I discovered something cool because of this: Himalayan Pink Salt lamps! (Available on Amazon.) Great for people who spend a lot of time in front of the computer. They are gorgeous and help remove EMFs...

What you are looking for is called a D-former in DAZ Studio. With your figure selected, go to the menu bar and Create > New D-Former. A popup dialogue will prompt you for a name. If it is only going to be used temporarily, I usually just use the default. Your choice. Click "OK", and nothing will seem to happen. Go to your Scene pane and expand the figure's node heirarchy if it isn't already, and you'll see two new entries for your D-former: one for Field, and one for Base. Selecting the one for Base will highlight all the vertices on your figure in the Viewport, and you'll see the default will have the central portion of the figure highlighted in red, with the remainder in yellow. That indicates the strength of the deformer field, which can be adjusted as required. The default deformer field is a sphere, as you can see, with the figure at the centre. If you expand the D-Former Base, you'll see the D-Former itself. Selecting this, then switching to your Parameters pane will allow you to use the sliders there to deform your figure. But you want one for just the top of the figure's head, so select the Field item back under the Scene tab, then back to the Parameters tab. Since you don't need the field to be that big, you can start by shrinking it down until it is somewhat larger than your figure's head, then translate it up so it is positioned roughly encompassing the head. By using the X, Y and Z scaling sliders and the translation sliders you can size and position your deformer to give you more or less what you are after.

The little sticker on my laptop says Intel Core i5. Not too good with the more technical stuff, but could this be a reason why my renders seem to be taking longer?

Yes, if you are doing CPU renders. I CPU render too. Those folk talking of 0.5 - 4 hour renders are rendering with nVidia GPUs.

Ok, I'm going to sound stupid now. What's the difference between CPU renders and GPU, which would you recommend and how do I know which one I'm using? I should probably know this stuff by now!

Simply said, you need a lot of calculations to render an image. Each calculation is done by a core. A core can do one calculation at a time. Your CPU (Central processing unit) has probably 2 cores, plus 2 virtual cores = 4 rendering cores. The nVidea cards (GPU=Graphic procesing unit) have anywhere between 500 and 2500 (I think) so-called Cuda cores, which do the calculation. So the stack of neccessary calculations gets worked off much faster than your four CPU cores, hence your render is "completed" much faster.

Also, Iray only works with nVidea graphic cards, as AMD cards don't have the neccessary cuda cores for this.

EDIT: You can find out if you are rendering with CPU or GPU if you check your log file. ou can alsosee if you have a GPU available in REnder settings, in the advanced panel. Note that you might have to update your card's driver to render, and if the scene you try to render is larger than your VRam, it's going to CPU anyway.

I finally got Sakura to work--now her eyes, eyelashes and eyebrows are showing up when I installed through Connect rather than DIM... I think she's adorable, but I'm definitely going into that uncanny valley with this one. Tried out Mec4D's Central Park HDRI (plus extra lights) with it and a drop of iPad postwork (still sick in bed with flu!) Central Park was my childhood stomping ground so I couldn't pass that up when it was on sale. I see her products are on sale again, but I really miss those loyalty rewards...

Very cute, Wonderland! So sorry to hear you've got the flu. We spent a good chunk of December sick with Influenza A. My entire family had it at the same time. Guess who was sick and got to stay up with sick kids? So glad it's over (it really wrecked Christmas this year!)

I finally got Sakura to work--now her eyes, eyelashes and eyebrows are showing up when I installed through Connect rather than DIM... I think she's adorable, but I'm definitely going into that uncanny valley with this one. Tried out Mec4D's Central Park HDRI (plus extra lights) with it and a drop of iPad postwork (still sick in bed with flu!) Central Park was my childhood stomping ground so I couldn't pass that up when it was on sale. I see her products are on sale again, but I really miss those loyalty rewards...

Oooo so cute. Love the pose Wow didn't see this set before and its a flash sale. Caught it in the nick of time

I finally got Sakura to work--now her eyes, eyelashes and eyebrows are showing up when I installed through Connect rather than DIM... I think she's adorable, but I'm definitely going into that uncanny valley with this one. Tried out Mec4D's Central Park HDRI (plus extra lights) with it and a drop of iPad postwork (still sick in bed with flu!) Central Park was my childhood stomping ground so I couldn't pass that up when it was on sale. I see her products are on sale again, but I really miss those loyalty rewards...

Valentine's card - white front, inner surface red. Boolean cut-out of a heart shape on the front to show through to the "red" inside, and have some white writing? A popular trend on commercial cards where I live is to glue on some "bling"(rhinestones, glass or plastic "gems" etc.)

Typing of bling, I obtained some free .OBJ format gemstones from another site... what's the trick to disassembling or breaking up the "sheet" of stones that you seem to get? They all seemed to have been "grouped" together.

Also when I apply a shader to this type of .OBJ file the best translucent, "glossy" effect seem to happen when a surface is unbroken. In the case of the large flat emeralds here (middle row) removing the central edges gives a great big n-gon? This is a no-no, right?

I am quite taken with gemstone and glass and water shaders... it would be nice to be able to 'control' them if possible, in the geometry.  So far so good except when a large "facet" in the gem "face" has polygon edges running through it... not sure.

Had a great evening here. Hubby went to bed first though, which was a bit unfortunate as he put the central heating on before he went to bed and never got round to turning it off again. He's the only one here who knows how to work it after reading the manual and stashing it away somewhere when the boiler was replaced. Son of mine stayed over with his Italian girlfriend, who is used to a warmer climate and has already been causing him to lose sleep at home by insisting on putting the winter duvet on in October(!). The poor lad slept with the window open last night while she slept under a hefty pile of quilts. New Year's resolution is to locate and read the central heating manual :)

I hope everyone had a good one! :)

...oops, been busy doing tests with the new IBL Master. 

Happy 2018 to all in the Central portion of the nation, the mountains, and Daz Land 

53 minutes to go here.

Happy New Years Eve everyone, except ps1, to whom I say Happy New Year!!!

It is already new year's day there?

IIRC they're 12 hours ahead of Central time, which puts them into tomorrow Down Under.  I might be a few hours off, though.

This was a real thing. They used it in movies, too. Good times...

The radio was telling us there are fourteen tons of fireworks stashed in central Melbourne waiting to go off, asbestos snow is sounding good right now :)

Oh no; consider the extreme health hazards of the asbestos.

This was a real thing. They used it in movies, too. Good times...

The radio was telling us there are fourteen tons of fireworks stashed in central Melbourne waiting to go off, asbestos snow is sounding good right now :)

Not so much a composition as it is an "assembly study".

I bet DynaGirlsDaddy will recognize this character.  It's an "Xilien" from "Invasion of Astro-Monster", alternatively titled "Godzilla vs. Monster Zero", the titular kaiju being revealed as King Ghidorah.

The Xiliens were aliens living upon a planet on the far side of Jupiter.  Besides introducing ETs to the Godzilla franchise, they presented the trope of aliens controlling kaiju as weapons.  Well, at least within Goji films.  Other movies (usually from the West) in no way connected to Godzilla had already explored this theme, but the Xiliens were Toho's take on the idea.

The Xiliens had a very distinctive appearance, wearing form hugging grey jumpsuits with black "vests", a matching "cumberbund" (an element I did not include here), gloss black gloves, boots and a scuba-like cowl mounted with an antenna.  They also wore thin visors predating the "cyberpunk" look by nearly 20 years.  Most eye-catching, at least to me, was the inclusion of a wide tubular "collar" that reached a height so as to partially hide the chin.

This collar reminded me of something.  JoeQuick had originally sold a product called "Alien Force", one he later offered for free at ShareCG.  The central item was a jumpsuit with, yup, a wide tubular collar and a large selection of material zones that could be customized.    While not as absurdly tall as the collars on the Xilien costumes, by selecting a "ghost" body group labeled "neck" (the collar geometry is actually associated with the "chest" group), I was able to lengthen the "T" axis to make it look more like the movie outfit.  Boom!  Instant Xilien!

JoeQuick's freebie is still available at ShareCG.

http://www.sharecg.com/v/62305/gallery/11/Poser/M4-Alien-Force-Suit

I used a cowl from "Zero-Gravity" a near future spacesuit for Michael 4, but JoeQuick has a variety of superhero freebies, some of which likely contain a "near enough" cowl.

Anyway, just something silly to show on a lazy Saturday.

Sincerely,

Bill

WOW! That's dang close! And I like the updated while still clearly oldschool look! Very good Job Bill!  And for some added info, Toho's first foray into the alien invasion controlling monsters was the non Godzilla film The Mysterians(1957), where the titular aliens controlled two robot monsters called Mogerua(later to become a combining mecha of human creation in Godzilla VS SpaceGodzilla). And here's some examples of Daz Dragon 3's versatility:

Not so much a composition as it is an "assembly study".

I bet DynaGirlsDaddy will recognize this character.  It's an "Xilien" from "Invasion of Astro-Monster", alternatively titled "Godzilla vs. Monster Zero", the titular kaiju being revealed as King Ghidorah.

The Xiliens were aliens living upon a planet on the far side of Jupiter.  Besides introducing ETs to the Godzilla franchise, they presented the trope of aliens controlling kaiju as weapons.  Well, at least within Goji films.  Other movies (usually from the West) in no way connected to Godzilla had already explored this theme, but the Xiliens were Toho's take on the idea.

The Xiliens had a very distinctive appearance, wearing form hugging grey jumpsuits with black "vests", a matching "cumberbund" (an element I did not include here), gloss black gloves, boots and a scuba-like cowl mounted with an antenna.  They also wore thin visors predating the "cyberpunk" look by nearly 20 years.  Most eye-catching, at least to me, was the inclusion of a wide tubular "collar" that reached a height so as to partially hide the chin.

This collar reminded me of something.  JoeQuick had originally sold a product called "Alien Force", one he later offered for free at ShareCG.  The central item was a jumpsuit with, yup, a wide tubular collar and a large selection of material zones that could be customized.    While not as absurdly tall as the collars on the Xilien costumes, by selecting a "ghost" body group labeled "neck" (the collar geometry is actually associated with the "chest" group), I was able to lengthen the "T" axis to make it look more like the movie outfit.  Boom!  Instant Xilien!

JoeQuick's freebie is still available at ShareCG.

http://www.sharecg.com/v/62305/gallery/11/Poser/M4-Alien-Force-Suit

I used a cowl from "Zero-Gravity" a near future spacesuit for Michael 4, but JoeQuick has a variety of superhero freebies, some of which likely contain a "near enough" cowl.

Anyway, just something silly to show on a lazy Saturday.

Sincerely,

Bill