BandoriFan said:

Mark_e593e0a5 said:

Having the same issue.... the hair looks good on the promo renders. But I am really diappointed by Fredda and Gou Luk, so I will no longer buy anything from those guys - at least until the known issues are fixed.

I don't have Fredda yet but the Gou Luk Bundle was one of the best things I got. I mean sure the character comes default with an expression but you get so many high quality clothes and accessories and makeups and the hair is nice too. The clothes can go so good with other sets and the shoes are especially high quality and come with many skin and lighting options. The socks have many versatile skins too. The dress also does and does pretty good with shaders too 

For the longest time I was always learning something new about the bundle long after I got it 

That's just the thing.  No one cares about ugly stuff that doesn't work right.  If it's ugly, no one would buy it, and if no one buys it, there won't be any complaints.  But this stuff looks amazing in promos, and a lot of the stuff is fine, Fredda is a super cute morph, but there's stuff that's badly made, and that's the cause of disappointment.

It is so strange. Some of Rarestone's previous products are amazing. The 200 morph packs are packed with unique shaping options. Many of the characters are great, and often packed with extra stuff. But the past few have been just a bit off. And it really does come down to that repeating gloss texture I mentioned earlier. The textures are clearly painted in a 2d application, so this results in seams across the UV. It is not visible on the other body textures, but with how the head UV is scaled differently than all other maps, it becomes quite visible there. It also makes the neck just look kind of bad and splotchy.

From a user standpoint, the easiest fix is to swap these textures with another character. Most bump and gloss mats will work on different characters fine. Of course, this doesn't address the problem. Like I said before rarestone really needs to either use a merchant resource for these maps, or they need to use an application that can paint across the UV map.

As for the hair, I don't even know where to begin. You can tell in the promos the hair isn't that good. Daz needs to up their QA game significantly and not let something like that in the store. The seam issue is one thing, but the hair is just plain bad. And Daz even pushed this product on the store page in its sale. I place the burden of quality squarely on Daz here. Ultimately they decide what is allowed in their stores, and if PAs don't get turned down, they will believe what they did is acceptable.

This is my 2 bits & the resources I know about for lipsynch I have book marked in case I needed something for lipsynch in one of my projects in the future..

For my needs  I just use daz studio 32 byte version that comes with Mimic or lipsynce. what ever they are calling it these days. I am still using it on 4.10 32bit.    i do not require much lipsynch in my animations to invest in something major.  But there is some pretty good alternatives

If you have a xbox or use Interactive Kinetic on your PC?  if so you can use Kinetic for great facial capture. downside is  you need to buy the little face censors.  but it will work on windows and Apple and I believe Linux too.   But the censors are not all that cheap and the more details in your motions you want the more you will need of the censors. but you can get them here pretty reasonable. the censors come with compatible software. https://brekel.com/face_v2/

 and I know some users at Animations World https://www.awn.com/  ( one of my favorite animations resources sites BTW ) they are using  F-clone a markerless face captures software with some pretty good results. But its a pretty hefty price though.  its does not use censors or special hardware or require a iphone and it does work for daz studio as well.  works off any web cam or Kinetic capture as well.   But the cost is like $135 for the indy version which is what you will really need.& what keeps me from buying it    https://f-clone.com/

Then you can always try   VUP on steam. I see a lot of people on YouTube seem to like it.  you sign up for steam and only pay for the time you use it.   I tried the demo of it and thought it a bit clumsy to use & did not transfer to or support DUF files either  Daz 32bit  lipsynch was better for my needs https://store.steampowered.com/app/1207050/VUPVTuber_Maker_Animation_MMDLive2D__facial_capture/

È vero che è diverso come tipo di approccio ma molti strumenti di Zbrush sono usati per fare i props che vedi nello store.
Ad esempio molti capelli, barbe ecc.. sono realizzati con Fibermesh in Zbrush.
Alcuni morph sono stati realizzati scolpendo i modelli base di Genesis/Michael/Victoria poi reimportati in DAZ e convertiti in morph.
Perfino i vestiti sono stati realizzati in Zbrush e poi esportati in DAZ.

In Zbrush non si rigga, se lo si fa è solo per mettere personaggi in pose plastiche (il software non permette di editare le aree di influenza dei joint e dunque non permette un rigging accurato). Se è necessario il rigging, si esporta il modello e lo si fa con altri software (Maya, Blender, ecc..)

watchdog79 said:
Naturally, the second freebie is amazing too: https://www.daz3d.com/sbibb-kitten-poses-and-morph

I do have some scenes in mind with a kitten or two, and this will help me a lot.

Thank you FeralFey, Orestes Graphics and SBibb and Merry Christmas to you all.heart

Awesome, I'm really glad the kitten poses and morph will be helpful for you and your renders. Merry Christmas! :-D

 

cathan01_wwg1wga said:

Thank you, SBibb, for the Daz House Cat poses and kitten morph. Especially love the expressions. I also appreciate the other Christmas freebies. Thanks to you all and Merry Christmas.

Aww, I'm really glad to hear you like the poses and morph, and that you love the expressions. They were fun to make. Merry Christmas to you, too! :-D

Thank you, SBibb, for the Daz House Cat poses and kitten morph. Especially love the expressions. I also appreciate the other Christmas freebies. Thanks to you all and Merry Christmas.

Manually pose the uniform to match the Genesis 8 male zero pose. Hide the figure (including its lashes), and if the uniform is in separate parts hide all bar one of those. Export as OBJ. Repeat for additional parts of the uniform if needed. Now import thsoe OBJs (using the same preset in the options dialogue) and you shoudl be able to use the Transfer Utility.

Something I've had as a problem is the "toes spread" pose control on my G8F is backwards. -100% widens them and +100% makes them come closer together.  It makes shoes not fit properly in many cases because the shoe poses assume it's the opposite and so the toes and up sticking out of the sides of the shoes, flats or heels. 

I don't know why this is happening to my G8F, I assumed I got a bad charcter morph that overwrote something or other.  Anyway I recently got a new computer and installed everything from scratch - blank slate - and same problem. At least I'm aware of it so I just manually fix it.

One thing you can do is select the character and unhide hidden morphs and then selectively zero each one on the feet to see if it fixes anything.  Some morphs do mess up the rigging a bit and don't have adequet corrective morphs. You may find you have a 'bad' one and you can just keep your eyes open for it.

bluejaunte includes zero foot morph sliders for his characters.  that's probably who you're thinking of.

j

helgi66 said:

If your asking about Evelyn by Cinnabar; I couldn't tell you. It's conflicting with another character called Evelyn (by Maelwenn) that was sold by Daz

and loads the Maelwenn morphs instead when I try to use it :(

Its really an issue. Why can't PA's name their morphs individually, like some do, e.g. SASE, Krashwerks, Mousso and others? Why does DAZ allow this on non-DAZ Original characters? I suppose DAZ has a set of rules for PA's. There are gazillons of characters for G3 and G8, so there has to be some naming convention to avoid morph conficts.

Alternatively, provide a means of renaming morphs easily inside Studio.... the not-so-great QC on DAZ side really affects the business model, in my opinion.

Setting: For a friend's WWII Diorama I need some dead soldiers (to 3D print them later). I found russian uniforms for Poser and Michael 4. I found poses for G8M. So I get Michael 4 into the uniform and it fits. I try to run the G8M pose on Michael 4 but it fails (distorted), of course. I try to fit the uniforms to G8M and it fits barely, I set the "import" from G2M, G, G3M original but with no satisfying result. G2M / Full dress works best, however.

So I looked for a transfer utility M4 (with cloth) to G8 (for the correct pose) but found only G2 to G8, not for older ones.

Is there a possibility like lock the pose of G8M, export it and set it to M4 with the fitting uniform? The M4 rig seems very similar to G8M but somehow...

Michael 4 with matching uniform applied, but pose displaced

G8M with matching pose applied, but uniform displaced

G8M: I tried to unfit the uniform and manually edit it in place, but once unfit it jumps to it's zero position, I edit it, I fit and it's the same like before.While I can hide the legs, body and everything hidden by cloth the hands are the problem as they stick out (the left one) completely displaced.

M4: The only solution that comes to my mind is to manually edit M4 to the G8M pose.

Are there other solutions than that?

Yeah, it's a problem with customized feet, autofit isn't particularly friendly to high heels.  Flats seem to adjust and generally look OK.

I saw one PA's product in particular that advertized a zeroing of the foot morph for heels/shoes but I don't remember which one.

memcneil70 said:

@MimicMolly, thank you for mentioning https://www.daz3d.com/shape-rigger-plus which I found I had but never used. I have also had issues with shoes, boots, hip areas but also some glasses warping on faces.

Do you think it can help the glass warping issue?

I am going to dig it out and try it on the next character that I can't fit clothes designed for it and which the clothes do not have proper sliders to adjust in the problem area.

According to this product, it mentioned that it makes sure the characters' bones are properly positioned. Which I suspect was the case for my G8F, because the script said it was "ready to rig".

Unless the head or eye morph isn't properly rigged, this script might not help with glasses. But it's worth a try. The script will tell you if it's properly rigged or not.

I really like this freebie: https://www.daz3d.com/reindeer-irradiator-and-poses

Awesome, and I love that poses for both Genesis 8 and the new gnomes are included. And the morphing beam is included too. The choice of the name of the product made me chuckle, well played.

Naturally, the second freebie is amazing too: https://www.daz3d.com/sbibb-kitten-poses-and-morph

I do have some scenes in mind with a kitten or two, and this will help me a lot.

Thank you FeralFey, Orestes Graphics and SBibb and Merry Christmas to you all.

Crios said:

Kainjy said:

Crios said:

Una curiosità, visto che eravamo in tema di Patreon, ma se si iniziasse una campagna di Crowfunding per creare un character 3D completo (mesh, rig, morph e cosi via), secondo voi potrebbe avere successo?

Più che un character io mi butterei su dei morph o dei prop (tipo code, altre appendici del corpo, ecc..) compatibili con la libreria attuale. Purtroppo se fai un nuovo character poi tutti i vestiti e accessori non sono più compatibili e pertanto si dovrebbe ricreare una libreria da 0. Non so quanto possa convenire ad un acquirente pagare per avere un nuovo personaggio e rimanere senza vestiti compatibili. 

No, ma la mia idea non era di creaer un personaggio umano.

Secondo me potrebbe non essere male anche produrre set di morph, anche molto specifici e combinabili su singole parti del corpo, e magari orientati su vari stili. Come, ad esempio, su manga/anime. Penso ci sia diversa gente che vorrebbe riprodurre i personaggi di una certa serie, ma non trova i morph adatti. Del tipo, sai, nello stile delle Clamp (li cerco da un pezzo) o di Toriyama, ecc. Per varie generazioni di figure, non solo l'ultima, che in molti usano ancora quelle vecchie. Penso che sarebbero apprezzati perché permetterebbero maggiori possibilità di creazione senza dover rifare da 0 la libreria.

 

danielegayart said:

Ciao a tutti!

stavo cercando info su filament e ho trovato finalmente una pagina in italiano su Daz! ne approfitto! Che voi sappiate su Mac Filament non funziona? I renderizzo solo in Iray ma faccio rendering base poi edito in photoshop.

A proposito del discorso di fare props e character o morph ma con tutti i morph che ci sono nello store si possono personalizzare pressochè all'infinito i personaggi quindi penso che o fai qualcosa di particolare davvero oppure non valga la pena.

Per i props invece avete mai guardato turbosquid e sketchfab? basta scaricare l'obj e poi importi facilemente in Daz c'e davvvero una marea di roba! 

Se si va di conoscermi cercatemi su Instagram @danielegay_arts (gay è il mio cognome e so che causa equivoci ma è solo un cognome)

Buon weekend!

Ciao Daniele, piacere di conoscerti!

*agita la manina* Utente mac, se ci fosse bisogno.

 

 

Crios said:

Tiziano said:

Che voi sappiate, esistono persone che creano contenuti per DazStudio su Patreon?

Ad esempio qualcuno che faccia un discorso tipo: tutti i miei Patroni riceveranno un oggetto di un certo tipo alla settimana? O al mese?

Oppure qualcuno che dica: io creo vestiti per Daz a tema supereroistico (o medievale, o morph, o qualsiasi altra cosa): sponsorizzatemi così ne creo sempre di più?

Lo chiedo perchè faccio fatica a trovare cose che mi servano veramente: spendo un sacco di soldi per cose meravigliose che però non iesco ad usare per i miei scopi perchè sono troppo diverse tra loro.

Ne ho trovato uno href="https://www.patreon.com/Darkseal

Mi sembra che, su Patreon, Darkseal si stia convertendo a progetti per stampa 3d, e comunque i suoi prodotti sono molto diversi da quelli che uso io. Il problema è anche trovare creatori di cose che mi possono essere utili.

https://www.daz3d.com/reindeer-irradiator-and-poses

https://www.daz3d.com/sbibb-kitten-poses-and-morph

Not sure about Bend Control.  Seems like some work and some don't, depending on how they operate (morph driven morphs, bone driven morphs, standard slider morphs, etc).  I'm no expert, just kinda guessing.

Ultimate Natural Bend Morphs are JCM's so the bones drive the morph, and we have been able to import those with Diffeomorphic.

https://www.daz3d.com/forums/discussion/447876/diffeomorphic-morph-drivers#latest

 

 

I had bought a G8F a while back whose morph warped the shoes really bad. But then, I ran Zev0's Shape Rigger Plus on her morph, and stopped having those problems. It could be the rigging too.