Loading...
> >

NEED to know WHO & HAIR???

MKeyesMKeyes Posts: 474
in The Commons

WHO is this character and where is that HAIR... I NEED to know - and WOW... yeah, wow... any answers links, directions, names etc. Very much appreciated!

Comments

  • HavosHavos Posts: 5,581

    The morph to me looks similar to standard M6, but I have no idea of the texture. The hair to me looks like the really short hair option to Latics "Real Short Hair".

    http://www.daz3d.com/real-short-hair-for-genesis-2-male-s

    The freebie that makes the hair very short is here:

    http://laticis.deviantart.com/art/Laticis-Imagery-FREE-Addon-Really-Short-Hair-519457893

  • SorelSorel Posts: 1,412
    I think it might be FW Oliver? I think he had the rainbow tattoo textures. I cannot confirm since I am at work right now. The hair might be the scalp he comes with or it could also be Real Short Hair by Laticis.
  • SorelSorel Posts: 1,412
    Ok just looked at the product page it does not appear to be Oliver. Now I do t know who the texture is D:
  • RCDescheneRCDeschene Posts: 2,816

    Holy Crap! I want that character! O_O

  • j cadej cade Posts: 2,310
    edited October 2015

    Pretty sure its Gianni's textures on  Michael 6's morphs (Somewhat modified perhaps?). The hair and beard are definitely the Laticis ones (I dont have the hair so the render below is bald)

    character.png
    800 x 1040 - 825K
    Post edited by j cade on
  • l.z_93a5e78647l.z_93a5e78647 Posts: 11

    I think Havos is right. Looks like the M6 Nevio texture to me: see the moles on his pecs?

    Same for the hair...

  • FistyFisty Posts: 3,416

    Oliver indeed has a rainbow tatoo but it's on his bum.

  • vwranglervwrangler Posts: 4,971
    edited October 2015

    EDIT: I just realized that the Human Essentials for Iray promos used FW Dan's dogtags on Lee 6, so never mind everything I just said.

    Only his hairdresser ... er, I mean, the PA knows for sure. Maybe try to message and ask? The PA isn't that active, but he was on the forum just yesterday, so he does check in. (It is something of a crapshoot as to whether or not he'll know he has a message. I wish this forum was a teensy bit more declarative about that.)

    Post edited by vwrangler on
  • MKeyesMKeyes Posts: 474
    Havos said:

    The morph to me looks similar to standard M6, but I have no idea of the texture. The hair to me looks like the really short hair option to Latics "Real Short Hair".

    http://www.daz3d.com/real-short-hair-for-genesis-2-male-s

    The freebie that makes the hair very short is here:

    http://laticis.deviantart.com/art/Laticis-Imagery-FREE-Addon-Really-Short-Hair-519457893

    SPOT on correct with the hair! Thank you!

    Gianni is the texture... I figured that out... BUT the rainbow? Hmmm, that's where I'm not so sure. And I have Unshaven for Genesis, but it's acting funky trying to get it on M6. WIll now try M6 under Gianni... I've come pretty close, it's the HAIR that is the MAJOR NEED... so I downloaded the Add-on... tomorrow payday - I will be buying that hair!

     

     

  • MKeyesMKeyes Posts: 474
    edited October 2015
    j cade said:

    Pretty sure its Gianni's textures on  Michael 6's morphs (Somewhat modified perhaps?). The hair and beard are definitely the Laticis ones (I dont have the hair so the render below is bald)

    Almost... not quite, but getting really close to looking like we're heading into the OLD Michael 3 land. I have the face I want... but I see the ghost face of M3... LOL

    Post edited by MKeyes on
  • MKeyesMKeyes Posts: 474

    Look what I get when I try to add the freebie ADD-ON and it says that the file, Fibre-such'n'such - cannot be found. What's causing this?

    Screenshot 2015-10-23 10.20.45.png
    1920 x 1080 - 533K
  • vwranglervwrangler Posts: 4,971
    edited October 2015
    MKeyes said:

    Look what I get when I try to add the freebie ADD-ON and it says that the file, Fibre-such'n'such - cannot be found. What's causing this?

    If you can do a screen cap that includes the actual error message, that would be good. My guess, from what's on screen there, is that the installation didn't entirely work right, and you need to reinstall the base product as well as the add-on. It looks like it can't find its DSF geometry and/or UV files in the data folder.

    Does the base product, Real Short Hair, work just fine without the Really Short Hair add-on?

    Post edited by vwrangler on
  • SorelSorel Posts: 1,412

    did you make sure to have the skullcap selected? You have to have the original product applied, then you delete short hair from the skull cap, then have the skullcap selected and then apply the addon.

  • MKeyesMKeyes Posts: 474
    edited October 2015
    vwrangler said:
    MKeyes said:

    Look what I get when I try to add the freebie ADD-ON and it says that the file, Fibre-such'n'such - cannot be found. What's causing this?

    If you can do a screen cap that includes the actual error message, that would be good. My guess, from what's on screen there, is that the installation didn't entirely work right, and you need to reinstall the base product as well as the add-on. It looks like it can't find its DSF geometry and/or UV files in the data folder.

    Does the base product, Real Short Hair, work just fine without the Really Short Hair add-on?

    Yep... I did... I followed the instructions exactly. But will try to install over again.

    Sorel said:

    did you make sure to have the skullcap selected? You have to have the original product applied, then you delete short hair from the skull cap, then have the skullcap selected and then apply the addon.

    Yep... as I said above... bought the product and installed it. Then installed the Really Short Hair... saw it, see it... it's there. But it's not getting the Fibre in the data folder for some reason.

    FIXED... just needed to close DS and reopen it... and then it found it. Weird. So after every install, guess gotta do the open and close deal. Will remember that from now on. 

    Screenshot 2015-10-23 13.39.54.png
    1920 x 1080 - 508K
    Post edited by MKeyes on
  • vwranglervwrangler Posts: 4,971
    MKeyes said:
    FIXED... just needed to close DS and reopen it... and then it found it. Weird. So after every install, guess gotta do the open and close deal. Will remember that from now on.

    Are you installing with both DIM and Studio up and running at the same time? Or maybe installing manually while Studio is running?

  • HavosHavos Posts: 5,581

    I would have thought that the only time you need to restart studio following an install is when some add on is putting in a new dll or the like into the program area. You would then need to restart for Studio to see this. I am not sure if fibre hair mesh has this, I doubt it, but maybe the scullcap had some special code that needed the restart.

    So in reality you rarely need to restart after an install, but if things are not working, it should be one of the first things you try to fix it.

  • jestmartjestmart Posts: 4,449

    You could try right-clicking on DAZ Studio Formats and Poser Formats and select Refresh after installing new content.

  • MKeyesMKeyes Posts: 474
    edited October 2015
    vwrangler said:
    MKeyes said:
    FIXED... just needed to close DS and reopen it... and then it found it. Weird. So after every install, guess gotta do the open and close deal. Will remember that from now on.
    vwrangler said:

    Are you installing with both DIM and Studio up and running at the same time? Or maybe installing manually while Studio is running?

    Definitely DIM... always!

    Post edited by MKeyes on
  • VincentXyoojVincentXyooj Posts: 56

    Hello, someone was telling me about this. The model is my own morph, and same with the textures :). I thought I would drop by and give a reply, he is one 

    of my original characters, that I use for promos and what not. But as I see people knew his hair, real short hair by Laticis, same goes for the facial hair. 

  • MKeyesMKeyes Posts: 474

    This is the guy I got out of it, love it.

    Screenshot 2015-10-23 15.46.00.png
    1920 x 1080 - 834K
  • SorelSorel Posts: 1,412
    VincentXyooj said:

    Hello, someone was telling me about this. The model is my own morph, and same with the textures :). I thought I would drop by and give a reply, he is one 

    of my original characters, that I use for promos and what not. But as I see people knew his hair, real short hair by Laticis, same goes for the facial hair. 

    He is very lovely :)

Sign In or Register to comment.