Loading...
> >

Lord of Snow for M4 or G3?

AdreanAdrean Posts: 136
edited April 2016 in The Commons

l actually grabbed the whole set without further consideration (since it's awesome) and only realized, just now,  that the promo image for it says Iray and Genesis 3.

Now I'm confused. It the outfit for M4 or G3 ? Or is there an actual G3 version?

Post edited by Adrean on
«13

Comments

  • 3anson3anson Posts: 314

    Hi, i would say it is just that the wrong overlay was used. The product is for Michael 4 and Hiro 4. No mention of Genesis 3 in the product description.

  • VhardamisVhardamis Posts: 576

    It is for M4 only. It will have to be converted to work on Gen7 by going M4>G5>G6> then G7

  • BeeMKayBeeMKay Posts: 7,019
    edited April 2016

    It is a fantastic looking set. I debated a while with myself, because I mostly use G2 in my rendering at the moment, but then decided to buy it, nevertheless.

    Autofitting to G2/G3 gives the usual problems; a version rigged for G2/G3 would certainly give some sales. smiley

    Post edited by BeeMKay on
  • Peter FulfordPeter Fulford Posts: 1,325
    Vhardamis said:

    It is for M4 only. It will have to be converted to work on Gen7 by going M4>G5>G6> then G7

    I'm new to this, but this product appears to offer a direct M4 - G3M (G7) route.

    http://www.daz3d.com/wear-them-all-autofitting-clones-and-clothing-smoothers-for-genesis-3-male-s

    I hope so, as it's one of the reasons I picked it up. (not installed yet)

  • SorelSorel Posts: 1,412

    Has anyone tried this on G3M?

  • cosmo71cosmo71 Posts: 3,609
    Adrean said:

    l actually grabbed the whole set without further consideration (since it's awesome) and only realized, just now,  that the promo image for it says Iray and Genesis 3.

    Now I'm confused. It the outfit for M4 or G3 ? Or is there an actual G3 version?

    ME, TOO angry

  • cosmo71cosmo71 Posts: 3,609

    Now they should make one for g3m and give it to all who bought the m4 version for free because of the wrong promo image

  • cosmo71cosmo71 Posts: 3,609
    3anson said:

    Hi, i would say it is just that the wrong overlay was used. The product is for Michael 4 and Hiro 4. No mention of Genesis 3 in the product description.

    and what tells us what is right? the promo image or the description? I am a bit angry about this issue

  • ChoholeChohole Posts: 33,604
    cosmo71 said:

    Now they should make one for g3m and give it to all who bought the m4 version for free because of the wrong promo image

    As always, if anyone did buy this thinking it was for G3M, even though the title says quite clearly "Lord of Snow for Michael 4"  then there is always Daz 3D's guarantedd money back option.

  • cosmo71cosmo71 Posts: 3,609
    Chohole said:
    cosmo71 said:

    Now they should make one for g3m and give it to all who bought the m4 version for free because of the wrong promo image

    As always, if anyone did buy this thinking it was for G3M, even though the title says quite clearly "Lord of Snow for Michael 4"  then there is always Daz 3D's guarantedd money back option.

    well, maybe it will work for G2M if one has M4 for G2M?

  • ToyenToyen Posts: 2,029

    If only he was for G3M..... : (

  • thistledownsnamethistledownsname Posts: 1,336

    Isn't it the same clothing as http://www.daz3d.com/night-guard-for-genesis-2-males ?  Just for older figures and better textures?  Why is clothing even being made for M4?

  • HavosHavos Posts: 5,578
    thistledownsname said:

    Isn't it the same clothing as http://www.daz3d.com/night-guard-for-genesis-2-males ?  Just for older figures and better textures?  Why is clothing even being made for M4?

    because M4/V4 are still the primary figures used by Poser users.

  • DreamingGirlDreamingGirl Posts: 227
    thistledownsname said:

    Isn't it the same clothing as http://www.daz3d.com/night-guard-for-genesis-2-males ?  Just for older figures and better textures?  Why is clothing even being made for M4?

    Because this set was being worked on before Daz bought out RDNA, (and would have otherwise been sold at RDNA) and RDNA was primarily for Poser users right up until the end, and because many people still use the gen4 figures. Why does this bother you?

  • BeeMKayBeeMKay Posts: 7,019
    thistledownsname said:

    Isn't it the same clothing as http://www.daz3d.com/night-guard-for-genesis-2-males ?  Just for older figures and better textures?  Why is clothing even being made for M4?

    No, it's not. The set is also fantasy, but looks different from the one you mentioned.

    As for you second question, why not make something for M4? The character is still widely in use, and I use it often in addition to the G-Generations.

  • ChoholeChohole Posts: 33,604

    The character, clothing set and textures jumped in my cart and were downloaded so quickly that I have been able to troubleshoot on a couple of issues already.

  • ChuckdozerChuckdozer Posts: 453

    Umm... the name of the product is "Lord of Snow for M4", isn't it? Yes, the wrong watermark was used, but other than that the product description is quite lengthy and very specific about what the outfit is, what figure it's made for, and what's required to use it. Just curious how many bought it without knowing that the furry pauldrons require the LAMH Free Player? 

  • Oso3DOso3D Posts: 15,085
    LAMH for clothing? That's clever. I was wondering why people don't do that more.
  • ChoholeChohole Posts: 33,604
    Chuckdozer said:

    Umm... the name of the product is "Lord of Snow for M4", isn't it? Yes, the wrong watermark was used, but other than that the product description is quite lengthy and very specific about what the outfit is, what figure it's made for, and what's required to use it. Just curious how many bought it without knowing that the furry pauldrons require the LAMH Free Player? 

    Only for the DS version,  the Poser version uses the hair room.

  • ALLIEKATBLUEALLIEKATBLUE Posts: 2,983
    Chuckdozer said:

    Umm... the name of the product is "Lord of Snow for M4", isn't it? Yes, the wrong watermark was used, but other than that the product description is quite lengthy and very specific about what the outfit is, what figure it's made for, and what's required to use it. Just curious how many bought it without knowing that the furry pauldrons require the LAMH Free Player? 

    I was just looking at that. Do you need the full plugin or can you use the free player.  I have had the free player but frankly never used it.

  • BeeMKayBeeMKay Posts: 7,019
    ALLIEKATBLUE said:
    Chuckdozer said:

    Umm... the name of the product is "Lord of Snow for M4", isn't it? Yes, the wrong watermark was used, but other than that the product description is quite lengthy and very specific about what the outfit is, what figure it's made for, and what's required to use it. Just curious how many bought it without knowing that the furry pauldrons require the LAMH Free Player? 

    I was just looking at that. Do you need the full plugin or can you use the free player.  I have had the free player but frankly never used it.

    The free player works with all the LAMH presets, but be aware that it will not work in Iray. If you want to render the fur in Iray, you will have to convert it to obj first. The free player can also do that.

  • ALLIEKATBLUEALLIEKATBLUE Posts: 2,983

    Thanks BeeMKay

  • SorelSorel Posts: 1,412
    BeeMKay said:
    ALLIEKATBLUE said:
    Chuckdozer said:

    Umm... the name of the product is "Lord of Snow for M4", isn't it? Yes, the wrong watermark was used, but other than that the product description is quite lengthy and very specific about what the outfit is, what figure it's made for, and what's required to use it. Just curious how many bought it without knowing that the furry pauldrons require the LAMH Free Player? 

    I was just looking at that. Do you need the full plugin or can you use the free player.  I have had the free player but frankly never used it.

    The free player works with all the LAMH presets, but be aware that it will not work in Iray. If you want to render the fur in Iray, you will have to convert it to obj first. The free player can also do that.

    Actually the creaters stated that this was not needed and that you should be able to render the fur/hair without creating an obj first.

  • BeeMKayBeeMKay Posts: 7,019
    Sorel said:
    BeeMKay said:
    ALLIEKATBLUE said:
    Chuckdozer said:

    Umm... the name of the product is "Lord of Snow for M4", isn't it? Yes, the wrong watermark was used, but other than that the product description is quite lengthy and very specific about what the outfit is, what figure it's made for, and what's required to use it. Just curious how many bought it without knowing that the furry pauldrons require the LAMH Free Player? 

    I was just looking at that. Do you need the full plugin or can you use the free player.  I have had the free player but frankly never used it.

    The free player works with all the LAMH presets, but be aware that it will not work in Iray. If you want to render the fur in Iray, you will have to convert it to obj first. The free player can also do that.

    Actually the creaters stated that this was not needed and that you should be able to render the fur/hair without creating an obj first.

    It is now? Wow! laugh

    I haven't had the time to do a test render with the set yet, but it's great o know that they found a way around that obstacle.

  • ChuckdozerChuckdozer Posts: 453
    Sorel said:
    BeeMKay said:
    ALLIEKATBLUE said:
    Chuckdozer said:

    Umm... the name of the product is "Lord of Snow for M4", isn't it? Yes, the wrong watermark was used, but other than that the product description is quite lengthy and very specific about what the outfit is, what figure it's made for, and what's required to use it. Just curious how many bought it without knowing that the furry pauldrons require the LAMH Free Player? 

    I was just looking at that. Do you need the full plugin or can you use the free player.  I have had the free player but frankly never used it.

    The free player works with all the LAMH presets, but be aware that it will not work in Iray. If you want to render the fur in Iray, you will have to convert it to obj first. The free player can also do that.

    Actually the creaters stated that this was not needed and that you should be able to render the fur/hair without creating an obj first.

    Where does it say that? I read the entire product page and I didn't see that stated anywhere.

  • Oso3DOso3D Posts: 15,085

    That's EXTREMELY unlikely.

     

  • SorelSorel Posts: 1,412
    edited April 2016

    Well not on the product, I thought Kendell, one of the creaters of LAMH said that in a thread a while back.

    Post edited by Sorel on
  • ChuckdozerChuckdozer Posts: 453
    timmins.william said:

    That's EXTREMELY unlikely.

     

    No, it's true. I did read the entire product description page!

     

  • Oso3DOso3D Posts: 15,085

    Chuck: ... I meant the claim that the product automagically displays in Iray. ;)

     

  • ChuckdozerChuckdozer Posts: 453
    timmins.william said:

    Chuck: ... I meant the claim that the product automagically displays in Iray. ;)

     

    Thought so...Just thought I'd check :)  And I agree, very unlikely indeed.

Sign In or Register to comment.