You don't need the M4V4 Genesis morphs. Genesis includes the clone morphs for M4 and V4, and that's all GenX needs.

Have you found the folder "...\data\DAZ 3D\Genesis\Base\Morphs\D3D Gen X\" on your file system? It must be in one of your DS library folders. This folder will have the files GCF_Victoria4.dsf and GCH_Victoria4.dsf for the clone morphs, and a folder "Victoria 4" or "Victoria 4 (Clone)" with the morphs you transferred.

Also, check that you don't have several instances of Genesis installed in different DS library folders. This notoriously calls for trouble.

Finally, try the search feature in the Shaping tab. Should look like this:

 

Saw the folders already still no victoria morph, also searched for the GCF_Victoria and there's no file like that in my daz 3d library

Yup.

• Open V4 in Carrara
• Make sure Victoria 4 is sected in the instances tray
• in the browser, go to Poses > Daz3d's Victoria 4 > Morph Injections
• Double-click the morphs you wish to INJect into Vicky

You don't need the M4V4 Genesis morphs. Genesis includes the clone morphs for M4 and V4, and that's all GenX needs.

Have you found the folder "...\data\DAZ 3D\Genesis\Base\Morphs\D3D Gen X\" on your file system? It must be in one of your DS library folders. This folder will have the files GCF_Victoria4.dsf and GCH_Victoria4.dsf for the clone morphs, and a folder "Victoria 4" or "Victoria 4 (Clone)" with the morphs you transferred.

Also, check that you don't have several instances of Genesis installed in different DS library folders. This notoriously calls for trouble.

Finally, try the search feature in the Shaping tab. Should look like this:

The Victoria 4 shape must be dialed in before applying the transferred morph to get the correct shape. You will find the Victoria 4 Clone morph for Genesis under "*** People *** in the Generation X section of the shaping tab.

M 421 / V 1 / T 0 means that GenX has 421 morphs for Victoria 4 loaded, that 1 of these morphs has a non-zero value, and that 0 morphs are selected for transfer. Please read the manual for GenX. Video tutorials are fine for getting started, but only the manual describes all features.

The problem with eyes and teeth may be due to not dialing in the base Victoria 4 clone morph. Also, some morphs come with injection pose files that set the eye position directly as part of the pose, instead of connecting it to the morph dial value. In that case, you will see the eyes go out of place if you set the morph to 0 directly (i.e. with the dials, not the remove pose). GenX will not transfer these eye positions, but you can use the preset tab to convert the injection pose into a preset that sets these values.

The path to the Victoria 4 clone is: Genesis / Actor / Generation X / *** People *** / Victoria 4. Or look into the Shaping tab, with the same path except the first "Genesis". Shaping tab is less crowded. It must be there, GenX cannot transfer a morph without converting the clone morph before.

The path to the morph file is: ...\data\DAZ 3D\Genesis\Base\Morphs\D3D Gen X\GCF_Victoria4.dsf

I really don't have it. I checked everywhere like in d3d folder and every tabs in the parameters tab this also happened with someone not finding the morph but in his case he didn't find even the character morph. Mine like I said I do have the character morph just not the base Victoria 4 morph hence the eyes bulging bec it wasn't converted into Victoria 4 morph. One user said that you need to download the m4 v4 for Genesis which costs 19$ and it was a requirement before in genx, is that true? Also let's say that this works after downloading the 19$ product, will the problem happen again when I convert it to Genesis 3? What is the file name of the  Victoria 4!clone, I'll try to find it maybe it's in a different folder.

The path to the Victoria 4 clone is: Genesis / Actor / Generation X / *** People *** / Victoria 4. Or look into the Shaping tab, with the same path except the first "Genesis". Shaping tab is less crowded. It must be there, GenX cannot transfer a morph without converting the clone morph before.

The path to the morph file is: ...\data\DAZ 3D\Genesis\Base\Morphs\D3D Gen X\GCF_Victoria4.dsf

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I was able to create an Angel 4 full body morph (head and body) for Genesis. 

In GenX2 tab:

1. Load Source: V4.2.cr2
2. Click Apply Pose, load: Pose>DAZ's Victoria 4>Morph Injections>INJ Morphs++ V4.pz2
3. Click Apply Pose, load: Pose>Angel V4>!+Angel Face INJ.pz2 and !+Angel Face INJ.pz2
4. Mode: Create single Morph
5. Mode: Select > Transfer: On for all Non-Zero values
6. Shape: Victoria 4
7. Target: Genesis
8. Output folder: set to <your path>/data/DAZ 3D/Genesis/Base/Morphs/D3D Gen X/
9. Press Transfer, Give it a name: ie: Angel V4 click Accept.

To Test:

1. Load fresh Genesis
2. Dial in full body Morphs: Angel V4 and Victoria 4 (see pic attached)

The problem is that I do not see the Victoria morph after everything is done I only see the Angel morph when I select the Genesis. I already tried uninstalling both the Victoria 4 and Gen x but I still don't have the **people** and the base Victoria 4 morph when I select the Genesis.

I think for Genesis no Victoria 4 morph is created, since Genesis already has one. Only for G2F and G3F would a V4 morph be created.

For Genesis you should see Victoria 4 under Actor/Female/Real World or if you can not find there, change to "Show Hidden Properties", and then look under

Hidden/Clones

I think to see the one in Actor/Female/Real World you need to own http://www.daz3d.com/v4-and-m4-shapes-for-genesis, but I am not certain.

I remember in the older version of Generation X, http://www.daz3d.com/v4-and-m4-shapes-for-genesis was a required product, but I did not think that was true for Gen X2.

Oh alright I'm going to try it later, if I were to convert it to Genesis 3 though do I still need to download anything else? Also how do you show hidden properties? Also do you know the file name of the Victoria 4 clone morph? Dimension3d told me that it has to have that clone, I'm going to look for it maybe he Victoria 4 clone is just being put in a different folder.

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I was able to create an Angel 4 full body morph (head and body) for Genesis. 

In GenX2 tab:

1. Load Source: V4.2.cr2
2. Click Apply Pose, load: Pose>DAZ's Victoria 4>Morph Injections>INJ Morphs++ V4.pz2
3. Click Apply Pose, load: Pose>Angel V4>!+Angel Face INJ.pz2 and !+Angel Face INJ.pz2
4. Mode: Create single Morph
5. Mode: Select > Transfer: On for all Non-Zero values
6. Shape: Victoria 4
7. Target: Genesis
8. Output folder: set to <your path>/data/DAZ 3D/Genesis/Base/Morphs/D3D Gen X/
9. Press Transfer, Give it a name: ie: Angel V4 click Accept.

To Test:

1. Load fresh Genesis
2. Dial in full body Morphs: Angel V4 and Victoria 4 (see pic attached)

The problem is that I do not see the Victoria morph after everything is done I only see the Angel morph when I select the Genesis. I already tried uninstalling both the Victoria 4 and Gen x but I still don't have the **people** and the base Victoria 4 morph when I select the Genesis.

I think for Genesis no Victoria 4 morph is created, since Genesis already has one. Only for G2F and G3F would a V4 morph be created.

For Genesis you should see Victoria 4 under Actor/Female/Real World or if you can not find there, change to "Show Hidden Properties", and then look under

Hidden/Clones

I think to see the one in Actor/Female/Real World you need to own http://www.daz3d.com/v4-and-m4-shapes-for-genesis, but I am not certain.

I remember in the older version of Generation X, http://www.daz3d.com/v4-and-m4-shapes-for-genesis was a required product, but I did not think that was true for Gen X2.

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I was able to create an Angel 4 full body morph (head and body) for Genesis. 

In GenX2 tab:

1. Load Source: V4.2.cr2
2. Click Apply Pose, load: Pose>DAZ's Victoria 4>Morph Injections>INJ Morphs++ V4.pz2
3. Click Apply Pose, load: Pose>Angel V4>!+Angel Face INJ.pz2 and !+Angel Face INJ.pz2
4. Mode: Create single Morph
5. Mode: Select > Transfer: On for all Non-Zero values
6. Shape: Victoria 4
7. Target: Genesis
8. Output folder: set to <your path>/data/DAZ 3D/Genesis/Base/Morphs/D3D Gen X/
9. Press Transfer, Give it a name: ie: Angel V4 click Accept.

To Test:

1. Load fresh Genesis
2. Dial in full body Morphs: Angel V4 and Victoria 4 (see pic attached)

The problem is that I do not see the Victoria morph after everything is done I only see the Angel morph when I select the Genesis. I already tried uninstalling both the Victoria 4 and Gen x but I still don't have the **people** and the base Victoria 4 morph when I select the Genesis.

The Victoria 4 shape must be dialed in before applying the transferred morph to get the correct shape. You will find the Victoria 4 Clone morph for Genesis under "*** People *** in the Generation X section of the shaping tab.

M 421 / V 1 / T 0 means that GenX has 421 morphs for Victoria 4 loaded, that 1 of these morphs has a non-zero value, and that 0 morphs are selected for transfer. Please read the manual for GenX. Video tutorials are fine for getting started, but only the manual describes all features.

The problem with eyes and teeth may be due to not dialing in the base Victoria 4 clone morph. Also, some morphs come with injection pose files that set the eye position directly as part of the pose, instead of connecting it to the morph dial value. In that case, you will see the eyes go out of place if you set the morph to 0 directly (i.e. with the dials, not the remove pose). GenX will not transfer these eye positions, but you can use the preset tab to convert the injection pose into a preset that sets these values.

I don't have the **people** in my parameters tab only genx but no **people** and I really don't see any Victoria 4 morphs only the Angel for v4 morph. Why is the Vitoria 4 morph missing? What am I doing wrong? Or is the program defected? I've tried several times but I really do not see the Victoria base morph when I select the Genesis figure. I've already tried uninstalling both genx and Victoria 4.2 and installing them again but still the same things are happening. I can't find the **people** and I can't find the base Victoria 4 morph when I elect the Genesis.

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I was able to create an Angel 4 full body morph (head and body) for Genesis. 

In GenX2 tab:

1. Load Source: V4.2.cr2
2. Click Apply Pose, load: Pose>DAZ's Victoria 4>Morph Injections>INJ Morphs++ V4.pz2
3. Click Apply Pose, load: Pose>Angel V4>!+Angel Face INJ.pz2 and !+Angel Face INJ.pz2
4. Mode: Create single Morph
5. Mode: Select > Transfer: On for all Non-Zero values
6. Shape: Victoria 4
7. Target: Genesis
8. Output folder: set to <your path>/data/DAZ 3D/Genesis/Base/Morphs/D3D Gen X/
9. Press Transfer, Give it a name: ie: Angel V4 click Accept.

To Test:

1. Load fresh Genesis
2. Dial in full body Morphs: Angel V4 and Victoria 4 (see pic attached)

and the design for genesis 2 and 3 female and victoria 4 and put it for sale on daz ty   make morphs so you can make them longer shorter and thicker and use iray material so it looks so realistic

Make sure that at least one morph in the tree list has a non-zero and is selected, that way it will transfer that morph, and the victoria 4 shape.

Also ensure that the selected library where the morph will be placed is on your list of DAZ Studio libraries (look in Content Library). Otherwise when you load a fresh Genesis figure, the morph will not be found.

The Victoria 4 shape must be dialed in before applying the transferred morph to get the correct shape. You will find the Victoria 4 Clone morph for Genesis under "*** People *** in the Generation X section of the shaping tab.

M 421 / V 1 / T 0 means that GenX has 421 morphs for Victoria 4 loaded, that 1 of these morphs has a non-zero value, and that 0 morphs are selected for transfer. Please read the manual for GenX. Video tutorials are fine for getting started, but only the manual describes all features.

The problem with eyes and teeth may be due to not dialing in the base Victoria 4 clone morph. Also, some morphs come with injection pose files that set the eye position directly as part of the pose, instead of connecting it to the morph dial value. In that case, you will see the eyes go out of place if you set the morph to 0 directly (i.e. with the dials, not the remove pose). GenX will not transfer these eye positions, but you can use the preset tab to convert the injection pose into a preset that sets these values.

I have run the .bat and now I have new pz2 files in /Runtime/Libraries/!DAZ/Victoria 4. But no new morph parameters in Carrara for Victoria.

When I load the base Victoria 4.2 morph and its injections this is what shows up. The "T" in the apply pose seems to be 0. I can't find the base Victoria 4.2 morph after it has been converted, only the Angel for v4 character morph in the shapings tab when I select the Genesis figure.

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I do not have Angel for V4, but I have successfully transferred over V4 characters onto Genesis 1-3. You have to load the V4 CR2 as the source, ideally a V4 CR2 file that you had injected V4++ morphs into. Then follow these steps:

1) Click "Apply Pose" and browse to the pz2 file for the shape of Angel for V4.

2) In the morph tree list, right click and select: All->Transfer On for non-zero values.

3) In Mode select "Create single morph"

4) In target, select Genesis 3 Female (or Genesis 2 Female)

5) Press Transfer.

In the popup box type what you want to call the morph (eg Angel). If there are no errors, then load a new version of G3F, and dial the Angel morph, and V4 to 100%.

Actually I think the reason why this is happening is because I haven't morphed the character to Victoria 4.2 yet but I can't find the Victoria 4.2 in the shaping tab when I select Genesis so I don't know what I'm doing wrong considering I dragged and dropped the morph ++ and the Victoria 4.2

Look Under Parameters->Actor->Generation X->***People*** and you should see the V4 shape there.

I don't see it, I've looked everywhere I really don't know why it doesn't show up the only morph that shows up is the angel for v4 not the Victoria 4.2. I don't even have the **people** in the tabs.

do you have a Generation X entry under Actor?

This is what shows up when I apply the base Victoria 4.2 morph and its injections. Seems like nothing is being transferred because from what I've read the "T" in the apply pose indicates the number of morphs to be converted and in my case it's 0.

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I do not have Angel for V4, but I have successfully transferred over V4 characters onto Genesis 1-3. You have to load the V4 CR2 as the source, ideally a V4 CR2 file that you had injected V4++ morphs into. Then follow these steps:

1) Click "Apply Pose" and browse to the pz2 file for the shape of Angel for V4.

2) In the morph tree list, right click and select: All->Transfer On for non-zero values.

3) In Mode select "Create single morph"

4) In target, select Genesis 3 Female (or Genesis 2 Female)

5) Press Transfer.

In the popup box type what you want to call the morph (eg Angel). If there are no errors, then load a new version of G3F, and dial the Angel morph, and V4 to 100%.

Actually I think the reason why this is happening is because I haven't morphed the character to Victoria 4.2 yet but I can't find the Victoria 4.2 in the shaping tab when I select Genesis so I don't know what I'm doing wrong considering I dragged and dropped the morph ++ and the Victoria 4.2

Look Under Parameters->Actor->Generation X->***People*** and you should see the V4 shape there.

I don't see it, I've looked everywhere I really don't know why it doesn't show up the only morph that shows up is the angel for v4 not the Victoria 4.2. I don't even have the **people** in the tabs.

do you have a Generation X entry under Actor?

Those are the morphs for V4toV3 - a figure that wears Victoria 3 clothes but gives the Victoria 4 head, morphs, and UVs. Theer should also be a folder called Victroia 4. In any event, if you are using Carrara you need to run the DzCreateExPFiles-v4 script for your OS - .bat for Windows, .command for Mac, in /Runtime/Libraries/!DAZ.

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I do not have Angel for V4, but I have successfully transferred over V4 characters onto Genesis 1-3. You have to load the V4 CR2 as the source, ideally a V4 CR2 file that you had injected V4++ morphs into. Then follow these steps:

1) Click "Apply Pose" and browse to the pz2 file for the shape of Angel for V4.

2) In the morph tree list, right click and select: All->Transfer On for non-zero values.

3) In Mode select "Create single morph"

4) In target, select Genesis 3 Female (or Genesis 2 Female)

5) Press Transfer.

In the popup box type what you want to call the morph (eg Angel). If there are no errors, then load a new version of G3F, and dial the Angel morph, and V4 to 100%.

Actually I think the reason why this is happening is because I haven't morphed the character to Victoria 4.2 yet but I can't find the Victoria 4.2 in the shaping tab when I select Genesis so I don't know what I'm doing wrong considering I dragged and dropped the morph ++ and the Victoria 4.2

Look Under Parameters->Actor->Generation X->***People*** and you should see the V4 shape there.

I don't see it, I've looked everywhere I really don't know why it doesn't show up the only morph that shows up is the angel for v4 not the Victoria 4.2. I don't even have the **people** in the tabs.

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I do not have Angel for V4, but I have successfully transferred over V4 characters onto Genesis 1-3. You have to load the V4 CR2 as the source, ideally a V4 CR2 file that you had injected V4++ morphs into. Then follow these steps:

1) Click "Apply Pose" and browse to the pz2 file for the shape of Angel for V4.

2) In the morph tree list, right click and select: All->Transfer On for non-zero values.

3) In Mode select "Create single morph"

4) In target, select Genesis 3 Female (or Genesis 2 Female)

5) Press Transfer.

In the popup box type what you want to call the morph (eg Angel). If there are no errors, then load a new version of G3F, and dial the Angel morph, and V4 to 100%.

Actually I think the reason why this is happening is because I haven't morphed the character to Victoria 4.2 yet but I can't find the Victoria 4.2 in the shaping tab when I select Genesis so I don't know what I'm doing wrong considering I dragged and dropped the morph ++ and the Victoria 4.2

Look Under Parameters->Actor->Generation X->***People*** and you should see the V4 shape there.