What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I was able to create an Angel 4 full body morph (head and body) for Genesis. 

In GenX2 tab:

1. Load Source: V4.2.cr2
2. Click Apply Pose, load: Pose>DAZ's Victoria 4>Morph Injections>INJ Morphs++ V4.pz2
3. Click Apply Pose, load: Pose>Angel V4>!+Angel Face INJ.pz2 and !+Angel Face INJ.pz2
4. Mode: Create single Morph
5. Mode: Select > Transfer: On for all Non-Zero values
6. Shape: Victoria 4
7. Target: Genesis
8. Output folder: set to <your path>/data/DAZ 3D/Genesis/Base/Morphs/D3D Gen X/
9. Press Transfer, Give it a name: ie: Angel V4 click Accept.

To Test:

1. Load fresh Genesis
2. Dial in full body Morphs: Angel V4 and Victoria 4 (see pic attached)

The problem is that I do not see the Victoria morph after everything is done I only see the Angel morph when I select the Genesis. I already tried uninstalling both the Victoria 4 and Gen x but I still don't have the **people** and the base Victoria 4 morph when I select the Genesis.

I think for Genesis no Victoria 4 morph is created, since Genesis already has one. Only for G2F and G3F would a V4 morph be created.

For Genesis you should see Victoria 4 under Actor/Female/Real World or if you can not find there, change to "Show Hidden Properties", and then look under

Hidden/Clones

I think to see the one in Actor/Female/Real World you need to own http://www.daz3d.com/v4-and-m4-shapes-for-genesis, but I am not certain.

I remember in the older version of Generation X, http://www.daz3d.com/v4-and-m4-shapes-for-genesis was a required product, but I did not think that was true for Gen X2.

Oh alright I'm going to try it later, if I were to convert it to Genesis 3 though do I still need to download anything else? Also how do you show hidden properties? Also do you know the file name of the Victoria 4 clone morph? Dimension3d told me that it has to have that clone, I'm going to look for it maybe he Victoria 4 clone is just being put in a different folder.

To show hidden properties, select the "Properties" tab, then click on the small icon with the four horizontal bars at the corner, and click on "Show Hidden Properties" on the pop up box. Alternatively right click on the title bar of the "Properties" tab, this brings up the same pop-up box.

The Genesis V4 morph is here: /data/DAZ 3D/Genesis/Base/Morphs/DAZ 3D/base/CloneVictoria4.dsf

This is the clone used by autofit to get V4's clothing onto Genesis.

Try moving the Angel Morph to Genesis 2, just to see if you can get it working. If so, then you can go back to trying to get it working on Genesis.

I haven't bought the add ons yet. By the way I was already able to make the Victoria morph someone helped me a while ago although even if I've already dialed in the base Victoria morph whenever I dial the Angel for v4 morph I still get the bulging eyes and teeth. Do you know how to solve it?

No idea sorry, I have not had that issue with other characters before. Do you suffer the same problem with other V4 morphs. Have you tried posting to this thread

http://www.daz3d.com/forums/discussion/94881/genx2-update-genesis-3-add-on-commercial

The developer listens to this thread. He might have an idea what is causing your problems.

 

 

By the way how do you transfer skin textures from v4 to G3?

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I was able to create an Angel 4 full body morph (head and body) for Genesis. 

In GenX2 tab:

1. Load Source: V4.2.cr2
2. Click Apply Pose, load: Pose>DAZ's Victoria 4>Morph Injections>INJ Morphs++ V4.pz2
3. Click Apply Pose, load: Pose>Angel V4>!+Angel Face INJ.pz2 and !+Angel Face INJ.pz2
4. Mode: Create single Morph
5. Mode: Select > Transfer: On for all Non-Zero values
6. Shape: Victoria 4
7. Target: Genesis
8. Output folder: set to <your path>/data/DAZ 3D/Genesis/Base/Morphs/D3D Gen X/
9. Press Transfer, Give it a name: ie: Angel V4 click Accept.

To Test:

1. Load fresh Genesis
2. Dial in full body Morphs: Angel V4 and Victoria 4 (see pic attached)

The problem is that I do not see the Victoria morph after everything is done I only see the Angel morph when I select the Genesis. I already tried uninstalling both the Victoria 4 and Gen x but I still don't have the **people** and the base Victoria 4 morph when I select the Genesis.

I think for Genesis no Victoria 4 morph is created, since Genesis already has one. Only for G2F and G3F would a V4 morph be created.

For Genesis you should see Victoria 4 under Actor/Female/Real World or if you can not find there, change to "Show Hidden Properties", and then look under

Hidden/Clones

I think to see the one in Actor/Female/Real World you need to own http://www.daz3d.com/v4-and-m4-shapes-for-genesis, but I am not certain.

I remember in the older version of Generation X, http://www.daz3d.com/v4-and-m4-shapes-for-genesis was a required product, but I did not think that was true for Gen X2.

Oh alright I'm going to try it later, if I were to convert it to Genesis 3 though do I still need to download anything else? Also how do you show hidden properties? Also do you know the file name of the Victoria 4 clone morph? Dimension3d told me that it has to have that clone, I'm going to look for it maybe he Victoria 4 clone is just being put in a different folder.

To show hidden properties, select the "Properties" tab, then click on the small icon with the four horizontal bars at the corner, and click on "Show Hidden Properties" on the pop up box. Alternatively right click on the title bar of the "Properties" tab, this brings up the same pop-up box.

The Genesis V4 morph is here: /data/DAZ 3D/Genesis/Base/Morphs/DAZ 3D/base/CloneVictoria4.dsf

This is the clone used by autofit to get V4's clothing onto Genesis.

Try moving the Angel Morph to Genesis 2, just to see if you can get it working. If so, then you can go back to trying to get it working on Genesis.

I haven't bought the add ons yet. By the way I was already able to make the Victoria morph someone helped me a while ago although even if I've already dialed in the base Victoria morph whenever I dial the Angel for v4 morph I still get the bulging eyes and teeth. Do you know how to solve it?

No idea sorry, I have not had that issue with other characters before. Do you suffer the same problem with other V4 morphs. Have you tried posting to this thread

http://www.daz3d.com/forums/discussion/94881/genx2-update-genesis-3-add-on-commercial

The developer listens to this thread. He might have an idea what is causing your problems.

 

 

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I was able to create an Angel 4 full body morph (head and body) for Genesis. 

In GenX2 tab:

1. Load Source: V4.2.cr2
2. Click Apply Pose, load: Pose>DAZ's Victoria 4>Morph Injections>INJ Morphs++ V4.pz2
3. Click Apply Pose, load: Pose>Angel V4>!+Angel Face INJ.pz2 and !+Angel Face INJ.pz2
4. Mode: Create single Morph
5. Mode: Select > Transfer: On for all Non-Zero values
6. Shape: Victoria 4
7. Target: Genesis
8. Output folder: set to <your path>/data/DAZ 3D/Genesis/Base/Morphs/D3D Gen X/
9. Press Transfer, Give it a name: ie: Angel V4 click Accept.

To Test:

1. Load fresh Genesis
2. Dial in full body Morphs: Angel V4 and Victoria 4 (see pic attached)

The problem is that I do not see the Victoria morph after everything is done I only see the Angel morph when I select the Genesis. I already tried uninstalling both the Victoria 4 and Gen x but I still don't have the **people** and the base Victoria 4 morph when I select the Genesis.

I think for Genesis no Victoria 4 morph is created, since Genesis already has one. Only for G2F and G3F would a V4 morph be created.

For Genesis you should see Victoria 4 under Actor/Female/Real World or if you can not find there, change to "Show Hidden Properties", and then look under

Hidden/Clones

I think to see the one in Actor/Female/Real World you need to own http://www.daz3d.com/v4-and-m4-shapes-for-genesis, but I am not certain.

I remember in the older version of Generation X, http://www.daz3d.com/v4-and-m4-shapes-for-genesis was a required product, but I did not think that was true for Gen X2.

Oh alright I'm going to try it later, if I were to convert it to Genesis 3 though do I still need to download anything else? Also how do you show hidden properties? Also do you know the file name of the Victoria 4 clone morph? Dimension3d told me that it has to have that clone, I'm going to look for it maybe he Victoria 4 clone is just being put in a different folder.

To show hidden properties, select the "Properties" tab, then click on the small icon with the four horizontal bars at the corner, and click on "Show Hidden Properties" on the pop up box. Alternatively right click on the title bar of the "Properties" tab, this brings up the same pop-up box.

The Genesis V4 morph is here: /data/DAZ 3D/Genesis/Base/Morphs/DAZ 3D/base/CloneVictoria4.dsf

This is the clone used by autofit to get V4's clothing onto Genesis.

Try moving the Angel Morph to Genesis 2, just to see if you can get it working. If so, then you can go back to trying to get it working on Genesis.

I haven't bought the add ons yet. By the way I was already able to make the Victoria morph someone helped me a while ago although even if I've already dialed in the base Victoria morph whenever I dial the Angel for v4 morph I still get the bulging eyes and teeth. Do you know how to solve it?

No idea sorry, I have not had that issue with other characters before. Do you suffer the same problem with other V4 morphs. Have you tried posting to this thread

http://www.daz3d.com/forums/discussion/94881/genx2-update-genesis-3-add-on-commercial

The developer listens to this thread. He might have an idea what is causing your problems.

 

 

I've tried it with another v4 character and I was surprised that it works without any issues so maybe it's just the Angel for v4, I'll try to uninstall the Angel for v4 and try other characters to see if it works :) but please do tell me if you have solutions :)

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I was able to create an Angel 4 full body morph (head and body) for Genesis. 

In GenX2 tab:

1. Load Source: V4.2.cr2
2. Click Apply Pose, load: Pose>DAZ's Victoria 4>Morph Injections>INJ Morphs++ V4.pz2
3. Click Apply Pose, load: Pose>Angel V4>!+Angel Face INJ.pz2 and !+Angel Face INJ.pz2
4. Mode: Create single Morph
5. Mode: Select > Transfer: On for all Non-Zero values
6. Shape: Victoria 4
7. Target: Genesis
8. Output folder: set to <your path>/data/DAZ 3D/Genesis/Base/Morphs/D3D Gen X/
9. Press Transfer, Give it a name: ie: Angel V4 click Accept.

To Test:

1. Load fresh Genesis
2. Dial in full body Morphs: Angel V4 and Victoria 4 (see pic attached)

The problem is that I do not see the Victoria morph after everything is done I only see the Angel morph when I select the Genesis. I already tried uninstalling both the Victoria 4 and Gen x but I still don't have the **people** and the base Victoria 4 morph when I select the Genesis.

I think for Genesis no Victoria 4 morph is created, since Genesis already has one. Only for G2F and G3F would a V4 morph be created.

For Genesis you should see Victoria 4 under Actor/Female/Real World or if you can not find there, change to "Show Hidden Properties", and then look under

Hidden/Clones

I think to see the one in Actor/Female/Real World you need to own http://www.daz3d.com/v4-and-m4-shapes-for-genesis, but I am not certain.

I remember in the older version of Generation X, http://www.daz3d.com/v4-and-m4-shapes-for-genesis was a required product, but I did not think that was true for Gen X2.

Oh alright I'm going to try it later, if I were to convert it to Genesis 3 though do I still need to download anything else? Also how do you show hidden properties? Also do you know the file name of the Victoria 4 clone morph? Dimension3d told me that it has to have that clone, I'm going to look for it maybe he Victoria 4 clone is just being put in a different folder.

To show hidden properties, select the "Properties" tab, then click on the small icon with the four horizontal bars at the corner, and click on "Show Hidden Properties" on the pop up box. Alternatively right click on the title bar of the "Properties" tab, this brings up the same pop-up box.

The Genesis V4 morph is here: /data/DAZ 3D/Genesis/Base/Morphs/DAZ 3D/base/CloneVictoria4.dsf

This is the clone used by autofit to get V4's clothing onto Genesis.

Try moving the Angel Morph to Genesis 2, just to see if you can get it working. If so, then you can go back to trying to get it working on Genesis.

I haven't bought the add ons yet. By the way I was already able to make the Victoria morph someone helped me a while ago although even if I've already dialed in the base Victoria morph whenever I dial the Angel for v4 morph I still get the bulging eyes and teeth. Do you know how to solve it?

No idea sorry, I have not had that issue with other characters before. Do you suffer the same problem with other V4 morphs. Have you tried posting to this thread

http://www.daz3d.com/forums/discussion/94881/genx2-update-genesis-3-add-on-commercial

The developer listens to this thread. He might have an idea what is causing your problems.

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I was able to create an Angel 4 full body morph (head and body) for Genesis. 

In GenX2 tab:

1. Load Source: V4.2.cr2
2. Click Apply Pose, load: Pose>DAZ's Victoria 4>Morph Injections>INJ Morphs++ V4.pz2
3. Click Apply Pose, load: Pose>Angel V4>!+Angel Face INJ.pz2 and !+Angel Face INJ.pz2
4. Mode: Create single Morph
5. Mode: Select > Transfer: On for all Non-Zero values
6. Shape: Victoria 4
7. Target: Genesis
8. Output folder: set to <your path>/data/DAZ 3D/Genesis/Base/Morphs/D3D Gen X/
9. Press Transfer, Give it a name: ie: Angel V4 click Accept.

To Test:

1. Load fresh Genesis
2. Dial in full body Morphs: Angel V4 and Victoria 4 (see pic attached)

The problem is that I do not see the Victoria morph after everything is done I only see the Angel morph when I select the Genesis. I already tried uninstalling both the Victoria 4 and Gen x but I still don't have the **people** and the base Victoria 4 morph when I select the Genesis.

I think for Genesis no Victoria 4 morph is created, since Genesis already has one. Only for G2F and G3F would a V4 morph be created.

For Genesis you should see Victoria 4 under Actor/Female/Real World or if you can not find there, change to "Show Hidden Properties", and then look under

Hidden/Clones

I think to see the one in Actor/Female/Real World you need to own http://www.daz3d.com/v4-and-m4-shapes-for-genesis, but I am not certain.

I remember in the older version of Generation X, http://www.daz3d.com/v4-and-m4-shapes-for-genesis was a required product, but I did not think that was true for Gen X2.

Oh alright I'm going to try it later, if I were to convert it to Genesis 3 though do I still need to download anything else? Also how do you show hidden properties? Also do you know the file name of the Victoria 4 clone morph? Dimension3d told me that it has to have that clone, I'm going to look for it maybe he Victoria 4 clone is just being put in a different folder.

To show hidden properties, select the "Properties" tab, then click on the small icon with the four horizontal bars at the corner, and click on "Show Hidden Properties" on the pop up box. Alternatively right click on the title bar of the "Properties" tab, this brings up the same pop-up box.

The Genesis V4 morph is here: /data/DAZ 3D/Genesis/Base/Morphs/DAZ 3D/base/CloneVictoria4.dsf

This is the clone used by autofit to get V4's clothing onto Genesis.

Try moving the Angel Morph to Genesis 2, just to see if you can get it working. If so, then you can go back to trying to get it working on Genesis.

I haven't bought the add ons yet. By the way I was already able to make the Victoria morph someone helped me a while ago although even if I've already dialed in the base Victoria morph whenever I dial the Angel for v4 morph I still get the bulging eyes and teeth. Do you know how to solve it?

update: By the way I've tried a different v4 character and to my surprise it worked, no issues whatsoever so maybe it's just the Angel for v4 I'll try to reinstall the Angel for v4 and also try some other v4 characters but yeah if you can still give solutions please do :)

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I was able to create an Angel 4 full body morph (head and body) for Genesis. 

In GenX2 tab:

1. Load Source: V4.2.cr2
2. Click Apply Pose, load: Pose>DAZ's Victoria 4>Morph Injections>INJ Morphs++ V4.pz2
3. Click Apply Pose, load: Pose>Angel V4>!+Angel Face INJ.pz2 and !+Angel Face INJ.pz2
4. Mode: Create single Morph
5. Mode: Select > Transfer: On for all Non-Zero values
6. Shape: Victoria 4
7. Target: Genesis
8. Output folder: set to <your path>/data/DAZ 3D/Genesis/Base/Morphs/D3D Gen X/
9. Press Transfer, Give it a name: ie: Angel V4 click Accept.

To Test:

1. Load fresh Genesis
2. Dial in full body Morphs: Angel V4 and Victoria 4 (see pic attached)

The problem is that I do not see the Victoria morph after everything is done I only see the Angel morph when I select the Genesis. I already tried uninstalling both the Victoria 4 and Gen x but I still don't have the **people** and the base Victoria 4 morph when I select the Genesis.

I think for Genesis no Victoria 4 morph is created, since Genesis already has one. Only for G2F and G3F would a V4 morph be created.

For Genesis you should see Victoria 4 under Actor/Female/Real World or if you can not find there, change to "Show Hidden Properties", and then look under

Hidden/Clones

I think to see the one in Actor/Female/Real World you need to own http://www.daz3d.com/v4-and-m4-shapes-for-genesis, but I am not certain.

I remember in the older version of Generation X, http://www.daz3d.com/v4-and-m4-shapes-for-genesis was a required product, but I did not think that was true for Gen X2.

Oh alright I'm going to try it later, if I were to convert it to Genesis 3 though do I still need to download anything else? Also how do you show hidden properties? Also do you know the file name of the Victoria 4 clone morph? Dimension3d told me that it has to have that clone, I'm going to look for it maybe he Victoria 4 clone is just being put in a different folder.

To show hidden properties, select the "Properties" tab, then click on the small icon with the four horizontal bars at the corner, and click on "Show Hidden Properties" on the pop up box. Alternatively right click on the title bar of the "Properties" tab, this brings up the same pop-up box.

The Genesis V4 morph is here: /data/DAZ 3D/Genesis/Base/Morphs/DAZ 3D/base/CloneVictoria4.dsf

This is the clone used by autofit to get V4's clothing onto Genesis.

Try moving the Angel Morph to Genesis 2, just to see if you can get it working. If so, then you can go back to trying to get it working on Genesis.

...wow that's even further back than what I have. in 2004 I was still doing drawings by hand though it was getting more and more difficult. 

I still have an XP system which 2.8 is on.

I'm originally a professional traditional pencil animator, so I'm still drawing by hand, even if not professionally any more; I discovered Poser 4 around 2001 and thought it was a nice hobby; not long after that I discovered the Poser community, and also the DAZ website, and later on the flame war around Poser 5 that caused DAZ Studio in the first place. (Victoria 3 could not be used in the initial version of Poser 5, as I remember.) I only use Poser/Studio for still pictures; I have animated in Maya a bit, but found the process much more mechanical than traditional animation.

By the way, I also still have ancient versions of Poser running; 4, 5, 6, 7, 10 Debut and 11. I don't have a fancy graphics card with lots of cuda-cores so I went the Poser/Reality-way, and stuck with Vicky and Mike 4...

You don't need the M4V4 Genesis morphs. Genesis includes the clone morphs for M4 and V4, and that's all GenX needs.

Have you found the folder "...\data\DAZ 3D\Genesis\Base\Morphs\D3D Gen X\" on your file system? It must be in one of your DS library folders. This folder will have the files GCF_Victoria4.dsf and GCH_Victoria4.dsf for the clone morphs, and a folder "Victoria 4" or "Victoria 4 (Clone)" with the morphs you transferred.

Also, check that you don't have several instances of Genesis installed in different DS library folders. This notoriously calls for trouble.

Finally, try the search feature in the Shaping tab. Should look like this:

 

Saw the folders already still no victoria morph, also searched for the GCF_Victoria and there's no file like that in my daz 3d library

Figured how to generate the GCF_Victoria morph.

Shape:  Select Victoria 4 (Clone)

(Edit 3) Shape:  Select Victoria 4 (Clone) and Enable "Prefer Clone Shape"

Edit: Two morphs are generated, a Victoria 4 Head morph (GCH_Victoria4)  and a Victoria 4 Full Body morph (GCF_Victoria4). On the Parameter's tab, they display as Victoria 4 Head and Victoria 4 respectively.

Edit Edit:  Hummm.. I'm trying to replicate the generation of the GCH_Victoria4 and GCF_Victoria4 morphs but it's not happening. I was clicking on different GenX2 settings and they showed up. I remember  selecting the Shape: Victoria 4 (clone) and the other setting I was testing was enabling "Prefer Clone Shape".  Those morphs are generating.  I've attached a pic at one point they showed up when I saved one transfer as "angel test".

Edit 3:  I was able to generate the two morphs by selecting both Shape: Victoria 4 (Clone) and enabling "Prefer Clone Shape".  I attached a GenX2 visual.

Thank you for this, I was able to generate victoria 4 morph but when i dial in the angel for v4 character morph with the vitoria 4 base morph also dialed 100% the eyes and the teeth are still bulging

You don't need the M4V4 Genesis morphs. Genesis includes the clone morphs for M4 and V4, and that's all GenX needs.

Have you found the folder "...\data\DAZ 3D\Genesis\Base\Morphs\D3D Gen X\" on your file system? It must be in one of your DS library folders. This folder will have the files GCF_Victoria4.dsf and GCH_Victoria4.dsf for the clone morphs, and a folder "Victoria 4" or "Victoria 4 (Clone)" with the morphs you transferred.

Also, check that you don't have several instances of Genesis installed in different DS library folders. This notoriously calls for trouble.

Finally, try the search feature in the Shaping tab. Should look like this:

 

Saw the folders already still no victoria morph, also searched for the GCF_Victoria and there's no file like that in my daz 3d library

Figured how to generate the GCF_Victoria morph.

Shape:  Select Victoria 4 (Clone)

(Edit 3) Shape:  Select Victoria 4 (Clone) and Enable "Prefer Clone Shape"

Edit: Two morphs are generated, a Victoria 4 Head morph (GCH_Victoria4)  and a Victoria 4 Full Body morph (GCF_Victoria4). On the Parameter's tab, they display as Victoria 4 Head and Victoria 4 respectively.

Edit Edit:  Hummm.. I'm trying to replicate the generation of the GCH_Victoria4 and GCF_Victoria4 morphs but it's not happening. I was clicking on different GenX2 settings and they showed up. I remember  selecting the Shape: Victoria 4 (clone) and the other setting I was testing was enabling "Prefer Clone Shape".  Those morphs are generating.  I've attached a pic at one point they showed up when I saved one transfer as "angel test".

Edit 3:  I was able to generate the two morphs by selecting both Shape: Victoria 4 (Clone) and enabling "Prefer Clone Shape".  I attached a GenX2 visual.

You don't need the M4V4 Genesis morphs. Genesis includes the clone morphs for M4 and V4, and that's all GenX needs.

Have you found the folder "...\data\DAZ 3D\Genesis\Base\Morphs\D3D Gen X\" on your file system? It must be in one of your DS library folders. This folder will have the files GCF_Victoria4.dsf and GCH_Victoria4.dsf for the clone morphs, and a folder "Victoria 4" or "Victoria 4 (Clone)" with the morphs you transferred.

Also, check that you don't have several instances of Genesis installed in different DS library folders. This notoriously calls for trouble.

Finally, try the search feature in the Shaping tab. Should look like this:

 

Saw the folders already still no victoria morph, also searched for the GCF_Victoria and there's no file like that in my daz 3d library

Yup.

• Open V4 in Carrara
• Make sure Victoria 4 is sected in the instances tray
• in the browser, go to Poses > Daz3d's Victoria 4 > Morph Injections
• Double-click the morphs you wish to INJect into Vicky

You don't need the M4V4 Genesis morphs. Genesis includes the clone morphs for M4 and V4, and that's all GenX needs.

Have you found the folder "...\data\DAZ 3D\Genesis\Base\Morphs\D3D Gen X\" on your file system? It must be in one of your DS library folders. This folder will have the files GCF_Victoria4.dsf and GCH_Victoria4.dsf for the clone morphs, and a folder "Victoria 4" or "Victoria 4 (Clone)" with the morphs you transferred.

Also, check that you don't have several instances of Genesis installed in different DS library folders. This notoriously calls for trouble.

Finally, try the search feature in the Shaping tab. Should look like this:

The Victoria 4 shape must be dialed in before applying the transferred morph to get the correct shape. You will find the Victoria 4 Clone morph for Genesis under "*** People *** in the Generation X section of the shaping tab.

M 421 / V 1 / T 0 means that GenX has 421 morphs for Victoria 4 loaded, that 1 of these morphs has a non-zero value, and that 0 morphs are selected for transfer. Please read the manual for GenX. Video tutorials are fine for getting started, but only the manual describes all features.

The problem with eyes and teeth may be due to not dialing in the base Victoria 4 clone morph. Also, some morphs come with injection pose files that set the eye position directly as part of the pose, instead of connecting it to the morph dial value. In that case, you will see the eyes go out of place if you set the morph to 0 directly (i.e. with the dials, not the remove pose). GenX will not transfer these eye positions, but you can use the preset tab to convert the injection pose into a preset that sets these values.

The path to the Victoria 4 clone is: Genesis / Actor / Generation X / *** People *** / Victoria 4. Or look into the Shaping tab, with the same path except the first "Genesis". Shaping tab is less crowded. It must be there, GenX cannot transfer a morph without converting the clone morph before.

The path to the morph file is: ...\data\DAZ 3D\Genesis\Base\Morphs\D3D Gen X\GCF_Victoria4.dsf

I really don't have it. I checked everywhere like in d3d folder and every tabs in the parameters tab this also happened with someone not finding the morph but in his case he didn't find even the character morph. Mine like I said I do have the character morph just not the base Victoria 4 morph hence the eyes bulging bec it wasn't converted into Victoria 4 morph. One user said that you need to download the m4 v4 for Genesis which costs 19$ and it was a requirement before in genx, is that true? Also let's say that this works after downloading the 19$ product, will the problem happen again when I convert it to Genesis 3? What is the file name of the  Victoria 4!clone, I'll try to find it maybe it's in a different folder.

The path to the Victoria 4 clone is: Genesis / Actor / Generation X / *** People *** / Victoria 4. Or look into the Shaping tab, with the same path except the first "Genesis". Shaping tab is less crowded. It must be there, GenX cannot transfer a morph without converting the clone morph before.

The path to the morph file is: ...\data\DAZ 3D\Genesis\Base\Morphs\D3D Gen X\GCF_Victoria4.dsf

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I was able to create an Angel 4 full body morph (head and body) for Genesis. 

In GenX2 tab:

1. Load Source: V4.2.cr2
2. Click Apply Pose, load: Pose>DAZ's Victoria 4>Morph Injections>INJ Morphs++ V4.pz2
3. Click Apply Pose, load: Pose>Angel V4>!+Angel Face INJ.pz2 and !+Angel Face INJ.pz2
4. Mode: Create single Morph
5. Mode: Select > Transfer: On for all Non-Zero values
6. Shape: Victoria 4
7. Target: Genesis
8. Output folder: set to <your path>/data/DAZ 3D/Genesis/Base/Morphs/D3D Gen X/
9. Press Transfer, Give it a name: ie: Angel V4 click Accept.

To Test:

1. Load fresh Genesis
2. Dial in full body Morphs: Angel V4 and Victoria 4 (see pic attached)

The problem is that I do not see the Victoria morph after everything is done I only see the Angel morph when I select the Genesis. I already tried uninstalling both the Victoria 4 and Gen x but I still don't have the **people** and the base Victoria 4 morph when I select the Genesis.

I think for Genesis no Victoria 4 morph is created, since Genesis already has one. Only for G2F and G3F would a V4 morph be created.

For Genesis you should see Victoria 4 under Actor/Female/Real World or if you can not find there, change to "Show Hidden Properties", and then look under

Hidden/Clones

I think to see the one in Actor/Female/Real World you need to own http://www.daz3d.com/v4-and-m4-shapes-for-genesis, but I am not certain.

I remember in the older version of Generation X, http://www.daz3d.com/v4-and-m4-shapes-for-genesis was a required product, but I did not think that was true for Gen X2.

Oh alright I'm going to try it later, if I were to convert it to Genesis 3 though do I still need to download anything else? Also how do you show hidden properties? Also do you know the file name of the Victoria 4 clone morph? Dimension3d told me that it has to have that clone, I'm going to look for it maybe he Victoria 4 clone is just being put in a different folder.

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I was able to create an Angel 4 full body morph (head and body) for Genesis. 

In GenX2 tab:

1. Load Source: V4.2.cr2
2. Click Apply Pose, load: Pose>DAZ's Victoria 4>Morph Injections>INJ Morphs++ V4.pz2
3. Click Apply Pose, load: Pose>Angel V4>!+Angel Face INJ.pz2 and !+Angel Face INJ.pz2
4. Mode: Create single Morph
5. Mode: Select > Transfer: On for all Non-Zero values
6. Shape: Victoria 4
7. Target: Genesis
8. Output folder: set to <your path>/data/DAZ 3D/Genesis/Base/Morphs/D3D Gen X/
9. Press Transfer, Give it a name: ie: Angel V4 click Accept.

To Test:

1. Load fresh Genesis
2. Dial in full body Morphs: Angel V4 and Victoria 4 (see pic attached)

The problem is that I do not see the Victoria morph after everything is done I only see the Angel morph when I select the Genesis. I already tried uninstalling both the Victoria 4 and Gen x but I still don't have the **people** and the base Victoria 4 morph when I select the Genesis.

I think for Genesis no Victoria 4 morph is created, since Genesis already has one. Only for G2F and G3F would a V4 morph be created.

For Genesis you should see Victoria 4 under Actor/Female/Real World or if you can not find there, change to "Show Hidden Properties", and then look under

Hidden/Clones

I think to see the one in Actor/Female/Real World you need to own http://www.daz3d.com/v4-and-m4-shapes-for-genesis, but I am not certain.

I remember in the older version of Generation X, http://www.daz3d.com/v4-and-m4-shapes-for-genesis was a required product, but I did not think that was true for Gen X2.

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I was able to create an Angel 4 full body morph (head and body) for Genesis. 

In GenX2 tab:

1. Load Source: V4.2.cr2
2. Click Apply Pose, load: Pose>DAZ's Victoria 4>Morph Injections>INJ Morphs++ V4.pz2
3. Click Apply Pose, load: Pose>Angel V4>!+Angel Face INJ.pz2 and !+Angel Face INJ.pz2
4. Mode: Create single Morph
5. Mode: Select > Transfer: On for all Non-Zero values
6. Shape: Victoria 4
7. Target: Genesis
8. Output folder: set to <your path>/data/DAZ 3D/Genesis/Base/Morphs/D3D Gen X/
9. Press Transfer, Give it a name: ie: Angel V4 click Accept.

To Test:

1. Load fresh Genesis
2. Dial in full body Morphs: Angel V4 and Victoria 4 (see pic attached)

The problem is that I do not see the Victoria morph after everything is done I only see the Angel morph when I select the Genesis. I already tried uninstalling both the Victoria 4 and Gen x but I still don't have the **people** and the base Victoria 4 morph when I select the Genesis.

The Victoria 4 shape must be dialed in before applying the transferred morph to get the correct shape. You will find the Victoria 4 Clone morph for Genesis under "*** People *** in the Generation X section of the shaping tab.

M 421 / V 1 / T 0 means that GenX has 421 morphs for Victoria 4 loaded, that 1 of these morphs has a non-zero value, and that 0 morphs are selected for transfer. Please read the manual for GenX. Video tutorials are fine for getting started, but only the manual describes all features.

The problem with eyes and teeth may be due to not dialing in the base Victoria 4 clone morph. Also, some morphs come with injection pose files that set the eye position directly as part of the pose, instead of connecting it to the morph dial value. In that case, you will see the eyes go out of place if you set the morph to 0 directly (i.e. with the dials, not the remove pose). GenX will not transfer these eye positions, but you can use the preset tab to convert the injection pose into a preset that sets these values.

I don't have the **people** in my parameters tab only genx but no **people** and I really don't see any Victoria 4 morphs only the Angel for v4 morph. Why is the Vitoria 4 morph missing? What am I doing wrong? Or is the program defected? I've tried several times but I really do not see the Victoria base morph when I select the Genesis figure. I've already tried uninstalling both genx and Victoria 4.2 and installing them again but still the same things are happening. I can't find the **people** and I can't find the base Victoria 4 morph when I elect the Genesis.

What was the morph you were trying to move over. Some of Thorne's morphs distort the eyes, although not as extreme as you are showing. Try using the product with some different morphs as well.

Angel for V4. I have the starter for victoria 4.2 I don't know what's wrong because I followed the video tutorials on youtube. This product is such a disapointment. I hope you can help me

I was able to create an Angel 4 full body morph (head and body) for Genesis. 

In GenX2 tab:

1. Load Source: V4.2.cr2
2. Click Apply Pose, load: Pose>DAZ's Victoria 4>Morph Injections>INJ Morphs++ V4.pz2
3. Click Apply Pose, load: Pose>Angel V4>!+Angel Face INJ.pz2 and !+Angel Face INJ.pz2
4. Mode: Create single Morph
5. Mode: Select > Transfer: On for all Non-Zero values
6. Shape: Victoria 4
7. Target: Genesis
8. Output folder: set to <your path>/data/DAZ 3D/Genesis/Base/Morphs/D3D Gen X/
9. Press Transfer, Give it a name: ie: Angel V4 click Accept.

To Test:

1. Load fresh Genesis
2. Dial in full body Morphs: Angel V4 and Victoria 4 (see pic attached)

and the design for genesis 2 and 3 female and victoria 4 and put it for sale on daz ty   make morphs so you can make them longer shorter and thicker and use iray material so it looks so realistic

Make sure that at least one morph in the tree list has a non-zero and is selected, that way it will transfer that morph, and the victoria 4 shape.

Also ensure that the selected library where the morph will be placed is on your list of DAZ Studio libraries (look in Content Library). Otherwise when you load a fresh Genesis figure, the morph will not be found.