It was already corrected, its only 3 times for "05-20PLATCLUB"

And the victoria code already expired.

Is that 3x use for the month of May? or only for the weekend?

It was already corrected, its only 3 times for "05-20PLATCLUB"

And the victoria code already expired.

the Buddha statues were only free for 1 day? i forgot to check out and now it’s 1.99 again 

Banner & sales page are still up, but not free for me. I think I will skip it since I probably won't use it.

 

Purple banner LETS-DO-20 not working anymore, while FREE Victoria offer is still valid? :-(

I still see the Free Victoria banner and have the LETS-DO-20 message (closed purple banner yesterday), but discount isn't working for me either. Have tried with Gentle Paladin Poses (PC+); Mangrove Trees, Roots, and Bushes for Iray (DO); & 

Me too. And I own V2,3,4,5,6,7,8 so I definitely qualify.

Well I see above Daz says the LETS-DO-20 isn't valid today. I prefer the additional uses of the Plat. Club coupons.

Which reminds me--did Daz even clarify if the 3 uses applies to both coupons this time around, or if it really applies to both as "coupons" implies.

Purple banner LETS-DO-20 not working anymore, while FREE Victoria offer is still valid? :-(

The on-site message said "Today Only".

Hi Richard! Is that for the entire deal or just for the purple banner? As per my above message, the free Victoria offer doesn't seem to be discounting in cart anymore. I can't see anything in the sales page about it being only for one day, but then I'm a secret contact-wearing-basically-blind person and/or maybe you are only refering to the PB (that's supposed to stand for "purple banner" but now I'm gonna go make a PB&J sandwich...)

It lokiks like the purple banner is gone. However, the banner offer for a free Victoria is still up but also not working for me. The offer should either be fixed or removed.

Yeah. My Victoria coupon didn't work at all. I put in a ticket.

Purple banner LETS-DO-20 not working anymore, while FREE Victoria offer is still valid? :-(

The on-site message said "Today Only".

Hi Richard! Is that for the entire deal or just for the purple banner?

The banner said "today only". 

I will verify, but I believe it is the 5-20PlatClub that has 3 uses. Have you used the save6 previously?

Then maybe the banner should be corrected?

Yeah. We have asked for clarification for this reason.

what's the answer? It's been HOURS. (Not your fault, but if they haven't answered you, kick them in the butt. No excuse for this.)

Purple banner LETS-DO-20 not working anymore, while FREE Victoria offer is still valid? :-(

The on-site message said "Today Only".

Hi Richard! Is that for the entire deal or just for the purple banner? As per my above message, the free Victoria offer doesn't seem to be discounting in cart anymore. I can't see anything in the sales page about it being only for one day, but then I'm a secret contact-wearing-basically-blind person and/or maybe you are only refering to the PB (that's supposed to stand for "purple banner" but now I'm gonna go make a PB&J sandwich...)

Purple banner LETS-DO-20 not working anymore, while FREE Victoria offer is still valid? :-(

The on-site message said "Today Only".

The Victoria offer no longer appears to be discounting in cart but the banner is still active... Image attached! I'm guessing maybe it's been thrown off by the Victoria bases all going into the discounted DO products with today's banner. Hopefully it can be fixed though and the Vicky banner is still valid! 

The Eagles were wrong.  You can't check out any time you want.

the Buddha statues were only free for 1 day? i forgot to check out and now it’s 1.99 again 

Banner & sales page are still up, but not free for me. I think I will skip it since I probably won't use it.

 

Purple banner LETS-DO-20 not working anymore, while FREE Victoria offer is still valid? :-(

I still see the Free Victoria banner and have the LETS-DO-20 message (closed purple banner yesterday), but discount isn't working for me either. Have tried with Gentle Paladin Poses (PC+); Mangrove Trees, Roots, and Bushes for Iray (DO); & 

Me too. And I own V2,3,4,5,6,7,8 so I definitely qualify.

the Buddha statues were only free for 1 day? i forgot to check out and now it’s 1.99 again 

Banner & sales page are still up, but not free for me. I think I will skip it since I probably won't use it.

Purple banner LETS-DO-20 not working anymore, while FREE Victoria offer is still valid? :-(

I still see the Free Victoria banner and have the LETS-DO-20 message (closed purple banner yesterday), but discount isn't working for me either. Have tried with various older PC+, PA, & DO items. Can't screenshot easily on this tablet, sorry.

I guess with these issues plus clarifying  the 3x Platinum Club coupons deal, Daz will have a busy International Worker's Day

Purple banner LETS-DO-20 not working anymore, while FREE Victoria offer is still valid? :-(

The RuntimeDNA items page is a bit weird for me. It loads initially with 133 items and then does a quick refresh and reverts to only showing 55.

Which means on the current sales page half of the carosel items are absent from the linked page (they work in the cart though). 

When I load the page, it says 130 out or 133 items. When I uncheck the Hide Items I Own button, it shows 133.

It shows 133 at first and then half a second later switches to showing just 55. If you stop the page loading at just the right time it cancels the mini refresh and shows all 133 items. 

I think it's a Chrome thing, the Edge browser doesn't do the mini refresh.

My guess is you have the Daz Deals plugin installed, and the items that disappear immediately after the page loads are products you've hidden. This happened to me a number of times before I realized what was going on.

I just got a banner now saying coupons are good three times. Is that for May or was it covered up with the Victoria coupon? So confused...

Me too.  It's dated 4/29 in my Account/Messages/Exclusive Offers and says "... your coupons are usable three times this month ..."  which implies both the Monthy Coupon *and* the Monthly PA Coupon.  I thought previous references only mentioned the Monthly Coupon and didn't know it applied to the Monthly PA Coupon so I guess I missed out on a couple uses.  Welcome to May.

@RangerRick, Good news! You didn't miss out. The Save6 coupon was not useable three times in March or April. Only once each month. Here's the link to the original Honorary PC+ Membership page.

I just got a banner now saying coupons are good three times. Is that for May or was it covered up with the Victoria coupon? So confused...

Me too.  It's dated 4/29 in my Account/Messages/Exclusive Offers and says "... your coupons are usable three times this month ..."  which implies both the Monthy Coupon *and* the Monthly PA Coupon.  I thought previous references only mentioned the Monthly Coupon and didn't know it applied to the Monthly PA Coupon so I guess I missed out on a couple uses.  Welcome to May.

I just got a banner now saying coupons are good three times. Is that for May or was it covered up with the Victoria coupon? So confused...

Even I mix a lot of morphs in my characters. Instead of searching for those morphs in the parameters pane (for which we are paying with loadtime latency), with injection based morphs the same morph search can be done in the content library just like any other content so long as their metadata is available in the CMS. Statistically speaking, even if I combine 50 morph dials to define my character that would be less than 2% of all the morphs that are getting preloaded while loading each character in the scene. While the current approach works if one has only a few morph sets or characters installed, but it does not scale up with increasing number of morphs, expressions and characters that are being incrementally installed over a period of time. The approach for preloading every applicable morph unnecessarily is against the software engineering best practices such as YAGNI (you aren't gonna need it) and in this case, we are paying the technical debt of increased load times for not following it.

Even if you consider the tiny additional delay of searching and adding injection morphs from the content library compared to directly dialing them in the parameters pane, the one-time delay more than pays for itself considering how many times a scene gets reloaded during its entire lifecycle spanning several days or even weeks of work.

Injection poses, at least as implemented in Victoria 4 etc., still need to load the channel list and ERC links for them (for exactly the same reason as the Genesis figures do) and they are still slit across multiple files (all those pz2s in /Runtime/Libraries/!DAZ/Victoria 4/ etc.).

Can you help me understand the reason why there is a need to preload the channel list if not for populating the parameters pane while loading a character? The existing injection implemention in V4 generation may not be the ideal approach to tackle this, but injection, as in on-demand loading of morphs is still there within tools like the Morphloader.

Hello everyone, the reason for this post, is if you can guide me on how to improve the animations, and if it is a problem of mine, or is it general Daz3D.

I was watching animations such as in the video https://www.daz3d.com/animate-walk-styles-1-for-victoria-8 and I see that the feet are not fixed to the floor, they move when the superior part of the character is moved , I see in many animations made with DAZ that it is difficult to keep the feet without moving when animating the person, because in most there are rare movements, mainly they are seen on the feet, since the reference is the floor .
I spent many days trying to improve a simple animation of 150 frames. Modifying and deleting the unused KEYS. Moving axis by axis. But for example if I add some more frames, all the previous ones break, everything changes! Is this common?

Another query, if I have an anyblock animation, is it not possible to see the frames keys, the sliders (bend, twist) to see how its made and get some tips?

Thanks!

This is confusing to me and seems like a bug. It contributes to the "timeline is broken" feeling.

I have Keyframe Types set to TRSOAH (all types).

1. I create a new scene.
2. I load G8F. The timeline shows a keyframe triangle at time 0. 
3. I move the time to frame 15 and morph G8F (I drag the Victoria 8 body Parameters pane slider to 100%)
4. I play the animation, and it shows G8F changing from base shape to V8 body shape, as expected.
5. At the end of playing the animation, the time is set back to frame 0.
6. I save the scene file.
7. I reopen the saved scene file.
8. The keyframe on frame 15 is missing. I play the animation and nothing happens; G8F does not morph to Victoria 8 body anymore.

I try again (same scenario, except the time is on frame 15 when I save the file instead of on frame 0)

1. I create a new scene.
2. I load G8F. The timeline shows a keyframe triangle at time 0.  
3. I move the time to frame 15 and morph G8F (I drag the Victoria 8 body Parameters pane slider to 100%)
4. I play the animation, and it shows G8F changing from base shape to V8 body shape, as expected. 
5. At the end of playing the animation, I set the time to frame 15, to verify that she truly is in the Victoria 8 body shape (she is).
6. I save the scene file. 
7. I reopen the saved scene file. 
8. The keyframe on frame 15 is missing. But G8F is in the Victoria 8 body shape in keyframe 0! I play the animation. Nothing happens.

I will submit a help request, of course. 

On 5, there is a partial exception for the old Anne Marie Goddard Digital Clone for Victoria 3 - that is noted on the product page.

Anna-Marie Goddard.  Talk about a name from the Golden Age of, well, let's just leave it at the Golden Age.  If ever someone was a candiate for a clone...