Finally got it working, only took deleting it about four times

It's such a strange thing - I don't think any other character i've ever seen, WON'T let other clothes and hair fit her. I mean, heck, you can put any older hair on G3F and it'll work fine. What on earth is wrong with Hayley that she won't take hairs or other clothes?

Seems to be something that 3duniverse is doing to morph his/her girls - Rayn and Skyler have similar problems ...

I don't have Aikotoon - but I do know that Chip and Cookie have Magnets/DForms for the eyes built in (which creates the interesting shapes for hair until you unhide hidden properties and dial the DForms for the hair to zero).

I don't know if that information helps you - maybe AikoToon has similar DForms built in?

There often is a problem with eyes when transferring Thorne morphs to Genesis - many Thorne morphs have an Eyefix morph even for the original base. You have to transfer that one too.

Does this help?

Question

When importing a morph through morph loader pro, how do you get a parented object to move/follow it?

Nevermind, Finally found where parented objects are attached to scale not morph, and afterwords found a tutorial

*Edited

OK, that is weird. When you are bending, you are letting go of the paramater not just scrubbing back and forth? When the morph is not working, if you click the gear icon on the slider and select Parameters Settings is the bend listed as a controller at the bottom? Does opening and closing that dialogure reestablish the link with the bend as dialing in the morph does?

Well, now that you mention pin up poses... hadn't even thought about that hmm...

I made morphs for the hammer, axe and cleaver that scale and shift some parts around to make them smaller and shorter. The result is passable 1 handed versions of them, you can just load the default 2 hander and use the morph at 100% to make it into a 1 hander! I'll probably do 2-3 poses for 1 handers and I have to finish assembling the 3Delight versions of the materials and that should be all.

Also bought the Troll and a few other things today to see how files are structured etc... and ended up goofing around...

Morphs are linear - the application stoes the offset from the base position (the morph deltas) and translates the vertices along a line beween the base position and the morph shape. If you rotate the mesh the vertices will be right only at the extreme values (0 and 1) - in the worst case, a 180 degree rotation, the vertices will all be on top of each other at a setting of 0.5. If you want parts to rotate you need to rig the item as a figure.

Are you making a corrective morph that is meant to be triggered by both a morph and a bend

No, just morph triggered by bend.

 Again, which morph - the JCM or some other morph?

 I mean when i bending foot - morph not triggering by bend. If i dial morph to 100% and reset to zero, it is start working (morph triggered by bend)

SF-Design had some poses for the previous generation, so maybe those would convert over. I have the M6 set, but not the Jayden set, so I don't know if the scaling on the Jayden poses would produce issues. They come with expressions, but also have expression resets so that you can use your own.

https://www.renderosity.com/mod/bcs/tender-buddies/105630/

https://www.renderosity.com/mod/bcs/buddies-for-jayden-6/106605/

I used one of the Pose Converters to transfer Tender Buddies to G3M, but haven't used it yet.

And these poses are, in fact, EXACTLY "that innocent". (No naughtiness here, no.)

And all that said, I haven't had that much of an issue with using the opposite sex poses with same sex couples. It can, as Male-M3dia noted, be a bit fiddly about the feet and hands (and also hips and pelvis, depending on the pose), but they can be made to work.

THANKS!!   helps to know the correct terminology.

470$ >.<  wantz it though  http://www.sonycreativesoftware.com/sfxseries1-10

need a morph on Aiko's eyelashes to make em roll down when she closes her eyes

texture converter?  map transfer utility?

thanks!!

I searched for help on this but have not been able to find this particular problem. I am sure I am just missing one step. I created an object in Max and imported to DAZ through Figure setup. In max, I made a change to the model, an object translates backward while an object rotates within, exported the object. In DAZ, I used Morph Loader Advanced to load the new model, it worked beautifully. Went back to Max, zeroed the objects back to it's original form and chose two other objects to move and rotate. Object A (see figures) rotates forward while object B translates right, when I do the same steps to import the morph, object A scales down.

I've just imported all the obj files, Used transfer utility to fit to G2F and added textures. All saved in a seperate folder so at least I can use it.

I just finally updated from DS 4.9 to the newest 4.9 (forgot the number) and every time I try to load something I get the message "An error occurred while reading the file." I tried with connect on and off. I was able to load a character morph but can't load any materials for any character (G3). This is from the smart pane. I couldn't even find where all the G3 characters are in the content pane... It says to check the log file. Where is the log file??? Please help! Thanks.

Yeah, i do everything correctly.. But bend start inreacts with morph just after i randomly dial my morph.

I'm not sure what you mean here. Are you making a corrective morph that is meant to be triggered by both a morph and a bend?

And when i reupload saved product JCM not working if you do not dial the morph.

reupload = reload? Again, which morph - the JCM or some other morph?

Yeah, i do everything correctly.. But bend start inreacts with morph just after i randomly dial my morph.

And when i reupload saved product JCM not working if you do not dial the morph.

Now I am having an issue where I polypaint clothing with color and the color does not transfer to Daz. 

Also, instead of a shirt showing up as plastic or matte, etc in the properties, is there a fabric preset or do the render shaders make things look like fabric and other materials?

I picked up the Band-Aid at Poserworld. This is sort of a step in the right direction, but OMG it is tough to pose. It has a curve morph but It really is tough to get flush with the skin. I think making it conforming would likely be the way to go.

Has anybody seen this morph conversion tool for V4 and G2 to G3? In the absense of a GenX update for G3, maybe this could help. The item is sold on DeviantArt, and there is one small NSFW pic at the bottom of the description. The item is $25, and requires Windows 7 or newer along with the .NET Framework. You basically export a V4 or G2 figure to object, run the tool on that object, and then import the updated object back to Daz through the Morph Loader. Most of the comments on DA are positive.

http://darkhound1.deviantart.com/art/Legacy-to-Gen3-morph-converter-1-0-buy-it-here-589021408

Does anybody know, if it is possible to buy that converter without having account/ DApoints at Deviant Art?

Has anybody seen this morph conversion tool for V4 and G2 to G3? In the absense of a GenX update for G3, maybe this could help. The item is sold on DeviantArt, and there is one small NSFW pic at the bottom of the description. The item is $25, and requires Windows 7 or newer along with the .NET Framework. You basically export a V4 or G2 figure to object, run the tool on that object, and then import the updated object back to Daz through the Morph Loader. Most of the comments on DA are positive.

http://darkhound1.deviantart.com/art/Legacy-to-Gen3-morph-converter-1-0-buy-it-here-589021408

Does anybody know, if it is possible to buy that converter without having account/ DApoints at Deviant Art?