I'm working with Genesis 2.

I would very much like to create such a creature:

I would very much like to keep the functionaly of Genesis 2 with the great parameters, so creating a new model from scratch isn't my goal.

I have seen quadruped morphs for Genesis 2, but I think this scenario requires some else.

Does anybody have any great idea how I could accomplish such a creature??

Thanks!

Anyone have an idea how to fix this? Thanks.

EDIT

Just tried disabling and reenabling the Smart Content plugin (closing Daz as needed), and that didn't fix it, so we can rule that out.

SECOND EDIT

I did some better Googling and found the answer here https://www.daz3d.com/forums/discussion/37920/smart-content-stopped-working-for-g2f Uninstalling and reinstalling G2F Starter Essentials fixed it. Hopefully this helps someone if they have the some problem.

https://i.imgur.com/2xvyOMS.jpg

Use D.IM for ALL installation..

Strange thing happens

Some products are not found and give first the question

(in this example i would like to add Teen Josie 8)

"would you like save changes in the current scene before closing it"

I do not want to close that scene at all.. so i say no (but yes does not give an other result)

Recource Error

could not open file : people/genesis 8 female/characters/Teen Josie.duf

(when i go to that directory she is there.. and when I click on her.. DAZ opens her but not in the scene i wanted her in)

So some products are found (just got Abandoned House by stone mason..) and when I install it... it works perfect

other female figures do too... but there are some products like teen josie 8 that do not want to load

(the centaur 7 same problem)...

What can it be

Thanks!

Install manager V1.1.0.72 will not accept my Account name and Password

I can sign in through Daz3d software and the Daz3d website without issue but Install Manager says it is unable to login to the specified account.

I have uninstalled and re-installed with no success.

Any thoughts?

But recently i start to use the draw settings and change it to interactive and IT WORKED! than i load a scene with envoriment and genesis 3 and clothes, etc... AND IT WORKED TOO! And it gets better.... I click to render and WORKS!... but it was too good to be true...

I decided to make some tests to compare the quality of both, and i started other scene and the problems came back again!

What happen are that in the draw settings, when i put in interactive mode that happens ---> (https://imgur.com/a/FYi7q)  Will load forever if I let.

Other time doesn't even carry (https://imgur.com/a/GdEW1)

And if i change to Photoreal (https://imgur.com/a/Rboty)

If the render mode is marked as interactive this happen ---> (https://imgur.com/a/jvOQL) and if are marked as photoreal ---> (https://imgur.com/a/kNSNT)

If i start an scene with interactive mode enabled when i click in nvidia iray will work and if i click in render it will works too...  I save this scene, close the program and open again, load the scene and works too! i make an change on the scene and does not work again! (I cannot create the same scene every time i start the program.) (While writing this I realized that if the scene was too heavy, it also does not works) but this no make sense, because it load in photoreal what is are more heavy.

Restarting the program don't solve the problem, no even reinstall it.

My english sucks, but i hope someone understand. Please someone help-me!

I'm experiencing this oddity. Recently, when I buy new stuff and install it, I see the stuff is there and loads properly. But when I categorize it, it doesn't appear in the proper category. I mean, the category appears but not the click buttons to load the content.

I proceed normally going in the Library folder, People (for example), Genesis 3 Female, Clothing, Urban Survivors for Genesis 3 Female, and right-click on it selecting Create Category From Selected Folder & Sub-folders, and choose the category I want. Then, I go to the category, the folder is there, but no loading icons. 

What is happening?

Cheers 

(The screenshots, below, show which ones)

The product page does indicate 4.10 is required, so- after checking 4.9- I tried downloading and installing it into Beta 4.10.   But ut did not appear in B4.10, either.

Is it not compatible with Beta?

(DM says that I do have the latest version of DM) 

I have a problem. Every character I import from daz into MB has weird eyes, lashes and hair. I've been searching a lot from the internet and every single answer seems to be the same

"You lack transparency map".

I tried to find a youtube video showing me how to do this, but I could not find one. I found an article "http://docs.daz3d.com/doku.php/artzone/pub/tutorials/dazstudio/studio-export01", but the images are 404, so I have really no idea what to do.

It seems like I need to use photoshop, which I am complete noob in. I am also very new with MB. Can someone explain me, maybe with images, what I need to do in order to get for example G3M eyes to look atleast little bit normal?

I attached an image from MB showing the problem. I also attached image from the folder where the FBX-exporter put all the materials. I have no idea which of those I need to modify and how.

Update: found where they were hiding so all is fixed.. :)

When around minute 2:26 he teaches how to save the aniblock, but mine doesn't have that option.

When I have the block selected, it doesn't show (image). Do I miss an add-on?

The same ICON appears in the lower right corner of the Aux Viewport as well.

What is its purpose?  It isn't selectable, nor does it display a tool tip identifying its function.

http://scr.hu/6ywm/coddz

Please help, i need to do that for my book cover.

I want to get those 75% of renders down to pretty much real time. and the multi week animation renders down to a couple of days.

and don't know why i didin't think of this earlier.

Their is allot of hardware built for minning machines, most specificly, PCIe Riser cards.

has anyone tested this sort of setup with IRAY? I know this works well with minning because their dosn't need to be massive amounts of data transfered between the cpu and gpu's, your basicly just tapping into the gpu and its doing the work. doees iray work close to the same. my assumption is, the cpu compiles all the required information and sends it allong with textures to the gpu, and the gpu just sends data back every few ms with what it has "rendered".

I am looking at things like these http://www.newegg.com/Product/Product.aspx?Item=9SIABMK6K45522&cm_re=pcie_riser-_-17Z-00CS-00002-_-Product

and maybe after i do a little more research, things like these. http://www.newegg.com/Product/Product.aspx?Item=9SIABMK67S9034&cm_re=pcie_riser-_-9SIABMK67S9034-_-Product

The obvious problem I have right now, is you can only add so manny GPU's inside a case, and their is always the heat problem. and the first option would allow me to add 6 external gpu's my system as it is right now. The second would allow me to add 8 (leaving primary gpu in case) and with a custom build with a motherboard with intergrated graphics/APU, I could add 16. <--thats going to get expensive, but i could build up slowly using openbox/refurbs.

Also, anyone know if wattage requirments for gpu's stay the same if they are just being used for iray/cuda. or could i run 8 gpu's on a dedicated 1200 watt psu.

Thanks for any input.

I immediately checked and it's ONLY the G8F characters that have a problem, and the problem is consistant in both the new DS 10 install and my existing Beta install, which was working fine prior to this.  Moreover, all of my other figuress still seem to load properly, including G8M.  My first guess was that that the new Starter essentials ididn't work with the version of DS I was using, so I tried loading that.  Nope, that made no difference.  Then I theorized that my install of the new essentials package might have been corrupted, so I uninstalled it, as well as basic morphs and Zev's shape shift, deleted the fils , re-downloaded them and reinstalled.  No good again.

So, having exhausted the obvious, I'm turning here for help.  Does anyone have an idea as to what's going on here?

(Please review Acceptable Ways of Handling Nudity. You can replace the image with a non-texture, non-skin shader version and still illustrate your problem.)

Here's the image again with a bikini drawn on, since I can't fit an actual item of clothing on the figure given the basic problem that I'm tryinjg to solve, and having the skin texture there actually highlights a lot of the deformities that weren't as obvious with a grey version.. 

(Please review Acceptable Ways of Handling Nudity. You can replace the image with a non-texture, non-skin shader version and still illustrate your problem - drawing on a bikini in post doesn't work.)

Okay, third shot. 

I don't know where to find the morphs, or where to click to apply them? 

Also no documentation page :/

Anyone else have this problem?

Thanks

It is a Geforce GTX Titan Black 4GB that worked fine up til now drivers updated recently, this is a windows 8.1 

and I see this error. Any ideas? Thanks

2017-11-05 00:25:49.716 WARNING: dzneuraymgr.cpp(307): Iray ERROR - module:category(IRAY:RENDER):   1.0   IRAY   rend error: Cannot render: found no usable devices.

2017-11-05 00:25:49.716 Iray Render error: Invalid parameters (NULL pointer).

I can not get the new dforce to work, even on the bardot oufit all i get is "Could not find a valid open cl device" as shown in the dialouge box, this is while on Genises 8 f/male or on it's own.

thanks

pete

Is there a way to break all limits on a surface, or do I have to go into parameter settings for each one? I like how poses let you break all impacted limits in a single click when applying a pose that doesn't fit.

Could not open file : People/Genesis 3 Female/Genesis 3 Female.duf File does not exist

When I navigate to this file, it is actually there. I have unistalled daz and reinstalled it, and still nothing... any ideas on how to fix this