The Commons - Daz 3D Forums

What happened to the "spend $60 and get Package free" for today

eegle — Thu, 19 Mar 2015 09:27:51 +0000

Hey am I wrong, yesterday I thought there was a special for today that is we spend $60 we can chose a package and then showed the packages to choose from...

It is not up on the site now...what happened

eegle

I need a parka

misterskuts — Thu, 19 Mar 2015 15:45:47 +0000

Does anyone know know of a winter parka, especially of the type worn in the Arctic, that would fit M3 and up or James and up?

No textures for G2F genitalia?

Sylvan — Sun, 15 Mar 2015 09:52:05 +0000

I bought the pro bundle back then, so I am sure the genitalia are there.
Well, they are, but it didn't came with any textures.
At least not in my download.
When I look at the male genitalia texture folder, they are there, but when I browse to the same location in the folder of the females, no texture folder, only a "support" folder.
Also none of my HD or runtime searches brought the textures up and in the separate download of the G2F genitalia, there aren't any textures either.
Am I blind Oo

cant fin hair/neck/corset. I've seen them once, but...WHERE????

boisselazon — Thu, 19 Mar 2015 12:22:52 +0000

cant fin hair/neck/corset. I've seen them once, but...WHERE????

Hi,
Pretty much what the title says about this picture:

3rd promo image, all black feathered: the had/hair like a dead crow, the neck with black feathers, and the feathered gothic corset...and eventually the black long nails (morphed???).

http://www.daz3d.com/fw-danika

the picture:
http://www.daz3d.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/d/a/danika03.jpg

I'm pretty sure that I have already seen all the element one day. when? dunno. where? even worse %-P
and the search engine....pfffff :P because of the "sooo poetic" components names

BTW, how to include an image in a post?
thx in advance.

Jewellery Display Item Question

R25S — Wed, 18 Mar 2015 09:11:36 +0000

Does anyone know where I can find the Necklage shown in the second (from the Thumbnails) Promo Picture? http://www.daz3d.com/jewellery-display

Bone Splitter working Chainsaw [COMMERCIAL]

DzFire — Wed, 18 Mar 2015 09:38:54 +0000

Here it is Folks, the 'Bone Splitter' chainsaw. Now, I know what you're thinking, "another chainsaw prop" Well have I got news for you. This chainsaw is a working figure. Yep, her blades go around and she's perfect for that end of the world, dinosaur-zombie, alien invasion protection.

Just one note, don't run out of fuel ;)

https://www.daz3d.com/bone-splitter

Video in motion: https://www.youtube.com/watch?v=5xXNPv2oEgU

Studio rendering problem

Nosiferret — Wed, 18 Mar 2015 15:19:11 +0000

Ok, I'[m not savvy with Studio but I've been plugging away here and there and I have gotten several renders. Since the introduction of Iray, I can't get anything to render. I am not even 'using' this new addition. I open up a scene I've rendered before and I render again and all I'm getting is a box that pops up "Rendering in 3delight optimizing images 0/16" and nothing else but a time ticker that keeps ticking and nothing is happening. It is not a detailed scene, it should render in under 5 minutes, but it's doing the old Poser thing of just sitting there like a bump on a log. I do not get a render window that should open with a progress of the image. It's just dead.

7 minutes in and nothing has happened.

How do I fix this?

Thanks.

Congrats to Atticus Bones and Jindi- First Products!

Novica — Sat, 07 Mar 2015 23:19:14 +0000

I just wanted to point out two active forum members who just released their first products. Some of you may not have recognized Jindi because the vendor name is IndigoJanson. It's so neat to see forum participants become new vendors! I'm sure there's others I've missed from other forum sections that I don't surf- feel free to mention other new vendors, not trying to slight anyone :)

http://www.daz3d.com/lemonade-stand by DO and Atticus Bones (thanks- it's free!)
http://www.daz3d.com/build-a-street-english-country-village by IndigoJanson

Where is the free Pro Bundle, from yesterdays announcement????

RCTSpanky — Thu, 19 Mar 2015 04:08:03 +0000

Where is the free Pro Bundle, from yesterdays announcement???? Or has DAZ kidding us once again?

Searching for round sci-fi floating platform with railing

Kerya — Mon, 10 Jun 2013 08:47:52 +0000

My memory tells me there is something like that in the store ... searches for platform, pad and going through vehicles air didn't bring it up.

The nearest is the front part of the Core
http://www.daz3d.com/the-core
but I do remember a grid floor? and so-to-say a "single person vehicle"???
Or was it a landing platform?

Does that jog somebodys memory?

By the way: I added a sketch made from memory to message number 6
http://www.daz3d.com/forums/discussion/23546/#348104

Sassy Strapless Dress Weirdness

Stryder87 — Wed, 18 Mar 2015 00:22:54 +0000

Hi All

I was trying to do a quick render the other day using some new items I had just purchased, was wanted to use the Sassy Strapless Dress in the scene, and found something very odd. It seems that, applying it to a figure is fine, but as soon as I do anything afterwards, the dress goes all wonky (see attached sample).

In the attached picture I just did up, as an example, I used four base G2F figures, applied and parented the dress, then as soon as I tried to move the figure, the dress flew up in the direction of the movement. Nothing in the morphs will bring it back down, re-parenting does nothing as well. In the scene where I first found this problem, I had already moved the figure (the new Simona HD) before I added the dress and the dress applied immediately with the weird shaping.

Suggestions? This has me stumped as it's doing it right 'out of the box' with base figures.

Thanks.

Feathered Phoenix question

SnowSultan — Thu, 19 Mar 2015 01:22:36 +0000

Could someone who purchases the Feathered Phoenix outfit answer two quick questions for me?

- Does the loincloth have any movement morphs?

- Can the feathers be hidden by turning the opacity to 0?

Thanks very much. :)

Setting up avatar in root gallery

foxyc19869 — Wed, 18 Mar 2015 18:54:01 +0000

This is regarding the DAZ gallery. Does anyone know how to set up a avatar for one's root gallery? I know ShibaShake has one for hers. Thanks everyone :)

New free hyper realistic renderer on the way?

Toyen — Wed, 18 Mar 2015 19:02:00 +0000

Did I get this right? - http://venturebeat.com/2015/03/17/otoy-reveals-rendering-software-for-super-fast-virtual-reality-and-holographic-cinema/

who knows what program it will be for and if its even going to work with our DS but.....

Who else is excited?! : )))))))))

Killer Shark - Smoothing Modifier Base?

Xenomorphine — Wed, 18 Mar 2015 11:38:00 +0000

This is on offer and it's been tempting me for a while:

http://www.daz3d.com/killer-shark-for-genesis

However, the promotional images mention a 'smoothing modifer base' option and it doesn't seem to be in the relevant Daz Studio menus, from what I could see. Does anyone have this figure and know what to do with it in the present DS version?

Tutorial on Displacement Mapping For A Character

Tercel — Tue, 17 Mar 2015 20:01:47 +0000

I'm looking for a good tutorial - free or paid - on how to create a displacement map for a character using Photoshop or Jasc Paint Shop Pro, and then with directions on how I'd plug my image map into the Poser material room to get the desired effect, what I'm specifically looking for it for is to create raised skin in sections on a character, and while I've seen plenty on displacement maps, and character textures separately, I'm still missing the thing that ties these two areas together.

Anyone have any suggestions?

Problems with LOOK AT MY HAIR 1.5

aidanstoneauthor — Tue, 17 Mar 2015 13:49:34 +0000

Is anyone else having problems with keyboard commands not working? No matter what I do, I can't delete a follicle after it is placed. They strongly suggest docking the pane in one of the side-bars, but it will not. Two pages of action boxes come up at every step I take. It crashes Daz 4.7 constantly. Only exports Fiber Hair; will not export Render Man. I cant get the hair color to follow the chosen root and tip colors to the exported hair. Illustrations in manual for 1.5 do not match functions shown in boxes displayed in 4.7. Downloaded and printed entire manual and followed step by step; still crashes 4.7.
Is there a separate manual for 4.7, or different keyboard functions?
Seemed like an excellent way to make my half cat, half human lady, but...

So Where Is The Bundle Message?

Novica — Wed, 18 Mar 2015 11:06:11 +0000

I have all the bundles, so it doesn't apply to me anyway- but it's really annoying to supposedly get an offer when I spent the required amount, and then NADA. No messages in My Account, no pop up message, no message on the bundle page when I click to it from the rotating banner. Anyone else seeing it?

iray HDR+Eyes

Lostboys — Wed, 18 Mar 2015 07:55:18 +0000

When i'm using an HDR as an enviroment map it always makes the eyes milky.When i'm using only spotlights the eyes look great.Using both as dome+scene still messes up the eyes.Is there any way to combine those 2 without getting the milky eyes?

Martin Princess- free matching Conform waist Chain?

shante — Sun, 15 Mar 2015 17:56:48 +0000

I was thinking of getting The Martin Princess Outfit set for V4 before it disappears and read there is supposed to be a matching waist chain offered in the General Freepository section....HERE!.....But after looking looking most of the day so far one darn thread at a time and getting no help for the forum search engine.....which all seem to suck here...I have not had any luck.
anyone know what happened to that item?
Seems to me if it is no longer available here or anywhere for that matter then mention of it in the store product page should be removed instead of sending people looking in good faith for a support product that no longer exists. A horrible waste of my time.
I am so frustrated, despite having had the product in my cart intent in good faith to purchase it, i just took it out and frell it!

Undo function

eegle — Wed, 18 Mar 2015 10:30:30 +0000

Hello where is the "UNDO" function in the 4.7?

eegle

Help with "Kiss Me Poses"

eegle — Wed, 18 Mar 2015 10:00:24 +0000

Hello I need help with "kiss me Poses" I purchased...I can't get it to work

What are the steps I need to use this....I tried bringing up Michael6 and Victoria6 together in one scene then clicked the poses...

It doesn't put them together right...

Can someone lead me step by step please or refer me to a video

thanks

eegle

Solved ART_TheGIRL > what is the actual product name?

Lissa_xyz — Tue, 17 Mar 2015 21:59:33 +0000

I have an older G4 makeup pack labeled as ART_TheGIRL in both Pose and Materials, and for the life of me, I can't find the actual product that installed these suckers. They're not from the G4 base. Can anyone help me remember how I got these?

Downloaded and installed DS 4.8

foleypro — Wed, 18 Mar 2015 01:19:46 +0000

Looking for Game dev plugins but I cant seem to find decimator...?

Also great work to the whole community & Daz on 4.6 and 4.7...Been awhile time to get back to work...

Some of the renders from 4.8 are really nice...

Something to preview OBJs in a directory. Does it exist?

ghastlycomic — Tue, 17 Mar 2015 21:47:12 +0000

Is there a utility that will create thumbnails of all the OBJs in a directory?

I'm looking through the directory of all the clothes I made when I was beta testing MD3 and at the time I was more concerned with learning the software and making stuff than with proper naming protocols so I have no idea what most of the meshes are even of anymore and I made so much stuff that I'll take me forever to load every OBJ and catalogue them properly.

Help with Posing

eegle — Tue, 17 Mar 2015 20:48:56 +0000

Hello I purchased a package called i13 Working It is a whole scene Included below....
My question there an easy way of meshing my character with the prop...ie posing Victoria6 on one of the chairs.
Any help on this would be appreciated...any videos taking it step by step

thanks
eegle

What's Included and Features

i13 Working: (.DUF, .PP2 and .OBJ)
i13 Working Load All
Workstation Group
Add Ceiling
Cabinet Closed
Chair
Coffee
File Binder
File Cabinet
File Stack
Lolly
PC tower
Plant
Water Cooler
Smart Props:
Lolly Left Hand
Lolly Right Hand
Mug Left Hand
Mug Right Hand
Hand Poses:
i13 Working Scene (.DUF and .PZ3)
Go To Poses:
Getting File
Sit At LG Desk 01
Sit At LG Desk 02
Sit At LG Desk 02b
Sit At LG Desk 03
Sit At LG Desk 04
Sit At LG Desk 05
Sit At SM Desk 01
Sit At SM Desk 02
Stand Near SM Desk 01
Walking
Genesis 2 Female Working Poses + Mirrored Poses:
Zero Pose
Getting File Any
Sit At LG Desk 01 Any
Sit At LG Desk 02b Any
Sit At LG Desk 02 Any
Sit At LG Desk 03 Any
Sit At LG Desk 04 Any
Sit At LG Desk 05 Any
Sitat SM Desk 01 Any
Sitat SM Desk 02 Any
Stand Near SM Desk 01 Any
Walking Any
Hold Lolly Left Hand
Hold Lolly Right Hand
Hold Coffee Left Hand
Hold Coffee Right Hand
1 Light Preset
2 Camera Presets
Textures:
6 Texture, Bump and Reflection Maps (2048 x 2048)
1 Texture Map (2400 x 2400)
2 Texture and Bump Maps (1600 x 1600)
5 Texture and Bump Maps (1024 x 1024)
1 Texture Map (872 x 872)

All I ask is that Vendors Use The same folder name for each catagory on their products.

Zev0 — Tue, 10 Jul 2012 11:52:49 +0000

Hooray. Got a new product. Its called X under character, Y under pose, and Z under Props. WTF man. Wouldnt it make sense to keep the names the same? So if I load a character prop, I know what it is called, and if I go to POSE for a texture or pose I know it is listed under the exact same name. Same thing with Camera's, materials and lights. I load a scene, and for the life of me do not know under what freaking name the pose, or lights was put under. Some go under vendor names, some with a !! infront. I rename all my stuff now before It goes into my runtimes, but for all my older content it is still a mess. Also why put MAT infront of a texture set? Now although the product is called X, I must cycle under the letter M to find the textures for it. If the character is called Jane, under pose make the folder called Jane, if there is props for it make that folder called Jane. Rather make sub folders in there but keep the master folder the same name. There are one or two smart vendors that do this, and to them I give a thumbs up. I'm just venting because I do not understand the logic of such messy file naming.

Can’t seem to install/activate LAMH

cheard — Tue, 17 Mar 2015 15:48:21 +0000

I bought LAMH a couple of days ago during March Madness catch-up. I have installed it and it shows up in the About Installed Plugins window, with a green plug … so it seems to be installed properly. But I cannot figure out how to start it up! In the videos, Alessandro seems to have an LAMH icon in his DS toolbar … but there is not one there for me. What am I doing wrong?

Mac OS 10.10.2
DS 4.8.0.4
LAMH 1.5.0.1

what model is this?

KRISHANKO — Tue, 17 Mar 2015 05:49:57 +0000

hello everyone! first and foremost my most sincere apologies if this isnt the right place to post this, but in my lame defense, this is the closest subforum to be "general discussion" i found at 3:46 am (truth be told, this got me so puzzled i actively turned on my pc just to ask this).

what model is the one featured in the first image? (ie, the cover)
http://www.daz3d.com/queens-reign-vol-1

is the model available to pruchase or was it an original non-available creation?
if its available, for the love of hades would you kindly tell me which one is it?? shes so stunningly GORGEOUS!

thank you in advance

No seeing the extra 5%-10% discount for today?

Sylvan — Tue, 17 Mar 2015 13:30:34 +0000

I am having trouble to get the extra 5%-10% discount for today's purchases. It doesn't matter how many items I toss in my cart, I'm not seeing an extra discount?
I have 3 new mad items in my cart, that should give me the extra 10% right?

The Commons - Daz 3D Forums

What happened to the "spend $60 and get Package free" for today

I need a parka

No textures for G2F genitalia?

cant fin hair/neck/corset. I've seen them once, but...WHERE????

Jewellery Display Item Question

Bone Splitter working Chainsaw [COMMERCIAL]

Studio rendering problem

Congrats to Atticus Bones and Jindi- First Products!

Where is the free Pro Bundle, from yesterdays announcement????

Searching for round sci-fi floating platform with railing

Sassy Strapless Dress Weirdness

Feathered Phoenix question

Setting up avatar in root gallery

New free hyper realistic renderer on the way?

Killer Shark - Smoothing Modifier Base?

Tutorial on Displacement Mapping For A Character

Problems with LOOK AT MY HAIR 1.5

So Where Is The Bundle Message?

iray HDR+Eyes

Martin Princess- free matching Conform waist Chain?

Undo function

Help with "Kiss Me Poses"

*Solved* ART_TheGIRL > what is the actual product name?

Downloaded and installed DS 4.8

Something to preview OBJs in a directory. Does it exist?

Help with Posing

All I ask is that Vendors Use The same folder name for each catagory on their products.

Can’t seem to install/activate LAMH

what model is this?

No seeing the extra 5%-10% discount for today?

Solved ART_TheGIRL > what is the actual product name?