I can think of a multi-step process that would involve exporting/importing/changing surfaces, and re-rigging, but that's not "easy"

A wearables preset would just give me a single button to load 2 items, right?

This is our new product: Temple Guardian Outfit and Accessories is a complete asymmetric 9 pieces outfit:Fantasykini, Cloak over one shoulder, Jeweled Mask, Bastard Sword (can be one handed or two handed, and comes in left and right hand versions, and an unparented prop version is also included), Spaulder, Vambrace, High Sandals, Sleeve, Leg Straps, and also includes 10 poses for Genesis 3 Female(s).

Notice that you can load each piece independently. So you can mix them with other clothing, or use the fantasykini or the cloak alone, or whatever.

Comes with 8 full sets of materials for each piece that you can mix and match, hide options, and tons of features. Have a look to the product page.
 
You can get it here: Temple Guardian Outfit and Accessories for Genesis 3 Female(s)

If some of you want to post an image here, we will love to watch them! Thank you! :)

The character,  Reinhardt, especially with those armors, is very interesting. It's like a beutiful fusion of fantasy, Sci-Fi and a bit of medieval.

I have a question: is it even possible to dupilcate something like this below by mixing current Daz/Poser contents? I've got some armor sets myself and it seems possible, although the breastpalte might be the hardest part to find a match for.

The Ad also says that if you buy A Touch of Dirt that you also get a free Poke through tutorial. I don't remember see the Poke through tutorial anywhere. It wasn't in my downloads that I am aware of. So where do I find that?

Thanks.

Any ideas? Can I back-out these drivers?

FaerieTies Hair

Coven

Koko?

The new Jungle Book movie is surprisingly very good.  Technically.  I couldn't tell where animation and photography merged.  The images were totally believable (except for the talking animals).  I tried to find the animation but after a while I just gave up and watched the movie.  We've come a long way from the original "Tron".

I watched the whole thing and didn't get fidgety.  In my dotage I've become not opposed to getting up and walking out on a movie that frustrates and bores me.  So, for me to say that I sat through the whole thing is worth at least two stars.  The animation is another two stars.  They could have left out the musical numbers, so that keeps me from assigning another star, but overall I had a good time at the movies.

Thanks! :)

http://www.daz3d.com/1stbastion-buildings-police-station

Thanks,

I really want to fine tune my male characters

But since this is for females, I was wondering if I can find any for males?

Well here it is...

Not only does it show you how I create the highlights but you can also download the light preset itself from the video page on YouTube. All I ask is if you download the files please consider subscribing to my channel. Oh yeah and please don't redistribute the files. If someone needs them just send them to my channel to get them.

PS: The video also shows you how to set up an Auxiliary viewport for Nvidia Real Time Rendering.

Enjoy....:-)

A lot of artists have made Red Sonja fanart anyway, so maybe this thread can be helpful to others as well. Thanks in advance for any suggestions.

Thanks for any information you can provide. 

• Intel Core i7-6700K 4.0GHz Quad-Core Processor
• Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler
• Gigabyte GA-Z170X-Gaming 7 ATX LGA1151 Motherboard
• Crucial 64GB (4 x 16GB) DDR4-2133 Memory
• EVGA GeForce GTX 980 Ti 6GB Superclocked+ ACX 2.0+ Video Card
• Corsair Carbide Quiet 600Q ATX Mid Tower Case
• Corsair RM 1000W 80+ Gold Certified Fully-Modular ATX Power Supply
• Samsung 850 EVO-Series 1TB 2.5" Solid State Drive

Thanks for the help here

The delay is acceptable for a still image but I was wondering about animation. Seems to me that Interactive Mode is ideal for animation but it still has the initial delay which prompts me to ask how people can claim times like 10 seconds a frame for animations? 

1. Best way of lighting indoor scenes with reasonable render times? For example, HDR with some walls and ceiling removed? Or Mesh lights or spot lights with geometry (e.g. 100cm disk)? Should we avoid emmisives? Note: I tried all of these options yesterday and was amazed at the differences to render times caused by some combinations.

2. How to set up materials for products that don't come with IRay mats. For example, many of the G2F/G2M skins don't have IRay sets. So, can we just click on the Uber shader and expect a good result or is there a tutorial explaining how to do it right?

3. The "cost" of subdivision, displacement, bump and/or normal maps in terms of render times. I read that normal maps should be preferred but most of my content does not have a normal map option. I don't have Photoshop on this PC but should I be looking at some way of converting bump maps to normal maps and, if so, how? Also, are all those expensive HD versions of, and morphs for, the DAZ characters too polygon-heavy for IRay? 

4. Is there a good explanation of how to use the Canvas feature? It looks really interesting in that tonemapping can be done in post but, again, I don't have Photoshop (nor can I justify the subscription). I believe that being able to edit .exr files is a must but Gimp doesn't have that yet (as far as I am aware).

I posted a question on Tomshardware forum and got this build response. ($1200-$1400 price range) Also want a nice GPU, because it will also be used for gaming.

CPU: Intel Core i7-6700 3.4GHz Quad-Core Processor ($299.99 @ SuperBiiz)
Motherboard: Gigabyte GA-H170-D3HP ATX LGA1151 Motherboard ($80.67 @ Newegg)
Memory: G.Skill Ripjaws V Series 32GB (2 x 16GB) DDR4-2133 Memory ($90.00 @ Newegg)
Storage: Samsung 250GB 2.5" Solid State Drive ($74.99 @ NCIX US)
Storage: Western Digital Caviar Black 1TB 3.5" 7200RPM Internal Hard Drive ($80.99 @ SuperBiiz)
Video Card: MSI GeForce GTX 980 Ti 6GB Video Card ($653.98 @ Newegg)
Power Supply: SeaSonic 650W 80+ Gold Certified Semi-Modular ATX Power Supply ($78.99 @ SuperBiiz)
Total: $1359.61

I likely will switch to a 120gb SSD to save some money, and may want to get a slightly cheaper GPU. It's just been so many years since I last built a computer that I'm not too familiar with hardware quality now.

Any opinions and tips would be great. Thanks!

Anyway, I thought I'd try the "Detect Displays" on the display dialog, which of course does nothing. So, I figured I'd have a look in the console to see if there is any error associated with that silent and ineffective command...nada. 

But, what I DO see are thousands of errors like this: 

5/1/16 10:06:32.484 AM com.apple.xpc.launchd[1]: (com.daz3d.content_management_service) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.

WTF? Why is my computer wasting so much time doing this? Is this associated to PostgresSQL? 

I launched 4.9 and the messages continued. 

I logged into Connect, and the messages continued. 

What is this service and do I want to leave it there or should I find where it's hiding and prevent it from starting up? 

Maybe you'll have some answers after I've restarted and reset my PRAM and SMC, since apparently that's the only way to get my computer's second screen to be detected...fun...fun. Linux keeps sounding better and better every day.

Though I have my poser library installed in another directory/disk , I've tried to install it in both runtimes but I keep getting the same message.

Did anyone else have the same problem? And if so, how did you manage to install it?

Thank you in advance for your response :)

Hi,

Will the Ethnicity for Genesis Bundle work with Genesis 3? If not is there an Ethnicity for G3 planned?

Many thanks,
D.