To my credit I did contact the creators privately willing to pay for that but have gotten no response. I've played with doing it myself but I'm horrible at it. Just horrible.

See, I need to be able to morph them. A lot. A lot more than legacy rigging allows.

Now I *did* manage to get Aiko Toon 4 and a self brougth in morph of AT3 into my G1 figure. But poor Hiro Toon....

The fantastic RRRR Story Render Contest is over, and it's time to browse those wonderful stories and vote for your favorites. Also, vote for the best of ther best among the individual images.
Anyone can vote, not only those participating in the actual contest. This time teh voting is a  little special. We still have two tiers, but they are now named Story and Image, which is what they are all about.
The Story category is about the story and how it's presented visually and in text, while Image is more traditional about the individual image.

 Each win (1st to 3rd place) will also give the winner at least one sticky Lucky Bastard pull, which means the next round will be a little harder, see below for how wins and Lucky Bastards are counted.

Entries thread here:  RRRR Story Entries only thread
Vote here:  RRRR Story Voting

So, what are we voting about?
What are the prizes?

Winner in either category
- One item from Totte's store.
- $35 DAZ Store GC

Second place in either category:
- One item from Dumor3D's store.
- $20 DAZ Store GC

Third place in either category:
- $15 DAZ Store GC

Fourth place in either category:
- $10 DAZ Store GC

Fifth place in either category:
- $5 DAZ Store GC

The voting starts now, and ends Sunday, June 5, at 23:59:59 DAZ local time.

How votes are tallied and summed up:

Voting points: 1st = 5 points, 2nd = 4 points, 3rd = 3 Points, 4th = 2 Points and Tiebreaker = 1 Point.

If an entry gets 1st, two 2nd, one 4th and two tiebreakers in a category, that is 5 + 2x4 + 2 + 2x1 = 17 Points

Every enrties points per category is summed up, and top three is calcutaled in each category. As we now have five prizes, a maximum of two entries from the same artist can end up top three in each category, this is to spead the joy a little more. 

The image with most points from the same artist will be the base, the the average score for up to for other images will be added to that score, but if that image takes a top three placement, images who got to the cream of the crop with help from other entires, will gain extra LBs based on how many places it climbed, minus one. Here are two examples:

Example 1: The top image from X has 15 points. X also has five other images that has been voted for, 10, 8, 7, 7 & 5 points. Thaking the average of the first four images behind the top one is 10+8+7+7 = 8, so the first image which was at 4th place, now gets 23 points and rises to the top and becomes the winner. But, that image climbed 3 steps, so it will not only win, but give the winner 3 LB for the next run. 

Example 2: The top image by Y has 11 points, and the second image 9 points. The top image will now have 20 points and go from 5th place to 3rd place, granting Y 2 LB for the next run.

If two images ends up with the same score, we use the same rules as in the European Song Contest, the number of higher scores wins over many lower scores, so if one image has 5+5+5+1 (16) and another has 2+2+4+4+2 (16) the first one will come before.

To avoid votespamming, anyone voting needs to post here in this thead that they did vote, and use the same name as they have posting here as the DAZ Forum Name in the first question in the vote system at SurveyMonkey.

Just Kidding!

Honestly, these are great sets, but I've been watching  waaaaaay too much HGTV. 

I bought both of those sets (and the freebie), and thanks to the creators (Daz Originals, David Brinnen and Forbiden Whispers) for doing such a nice job on these. Also, thank you for making these compatible with Poser! I've been doing more work in Poser these days, so my purchases need to be compatible with both apps.

http://www.daz3d.com/fantasy-races-aunrae-the-dark-elf

Who is she???

Any suggestions?

For exporting scene to Maxwell Render I use my own developed plugin(now in alpha stage) - Maxwell Render Plugin for Daz Studio

In scene I use only environment IBL. All Default material(autoconverted from Daz Studio materials).

The Geometry is fine for this, it's divided into 4 faces of bottom left and right and top left and right.

I can get it into the figure setup pane, and joint editor, but exactly what I want to click and set for each part I don't know.

Ultimately, setting 2 countols for width and height would be great, but for now, I'd like the Left side to move along the X axis and then the two top parts to go up and down on the Y. No bends or buldges just simple moves.

Thanks

thanks!!

http://www.daz3d.com/hygrey-for-genesis-3-bundle

After years of experimentation the grey aliens have finally achieved a perfect hybrid with the humans of earth. The beauty and strength of humans are now combined with their own DNA to bring a new vitality to their race.

The set comes complete with custom crafted High Definition Morphs, and highly detailed texture sets, suitable for Iray and 3DL

HyGrey Male includes:

One HyGrey Character Preset

One HyGrey Morph Preset

One Pink HyGrey Full Material Preset

One Grey HyGrey Full Material Preset

One Glowing HyGrey Full Material Preset

Three HyGrey Eye Material Presets

Three Genital Material Presets

HyGrey Female Includes:

One HyGrey Character Preset

One HyGrey Morph Preset

One Pink HyGrey Full Material Preset

One Grey HyGrey Full Material Preset

One Glowing HyGrey Full Material Preset

Three HyGrey Eye Material Presets

Three Genital Material Presets

Also includes IRAY and 3DL MAT files

Does anybody know of any good thick bundles of wires/cables/tubes?  Actual 3D ones, not a 2D version.

They don't have to look exactly like the picture, they would be useful regardless of whether they were neat and orderly, splayed out or tangled or cut at one end, mixes of colors and thickness, wires, pipes, or evenly distributed into rows at one end, but it would be great if there were a large number of individual strands rather than just a handfull.

I know I can manually make them from individual wires and tubes, but a premade bundle would save zillions of hours of tedious work, I just wanted to see what my options were, if any.  I do have a few products with hoses and tubing mixed in that could be used in certain circumstances by hiding the other parts.  I know there was at least one product out there that had a bunch of tubing going into a central spot at one end, some kind of sci-fi lab, but can't remember what it was or if it work out well for something like this.

I have a lot of older poser content that I'd like to move over to Daz formats and directories.  Mostly I'm concerned about props\scenes\vehicles.  All this stuff is pretty benign, but its a nuisance since its in a different directory tree from Daz.

Anyone know which one it is? I try not to buy anything that's Iray only, as I'm going for toon renders with shaders, etc., that don't work on Iray materials from what I understand. (Still learning here.)

Any and all help appreciated!

I have some trouble finding loincloths for G3 male/female that properly bend when the person is sitting, kneeling or doing anything else but just stand.

For female G3 the Wild Wind Skirt is ok, and I thought the AQ Barbarian would be ok for males but it doesn't morph back and front.

The only thing that seems to work well is the one in Tribal Warrior for G2. Any suggestions? Thank you.

I kindly ask that you do not recommend that I search the forums for skin settings and manually adjust them for every one of my older textures. That isn't happening.  ;)  Thank you very much.

There are some G1 items I'd like, but, not willing to part with the funds if its not gonna be worth the effort.

OK, I found the problem. It says you can add 3 items for 80% off. But if you add a 4th item, all of them go back to full price. Weird.

I have two options:

1) $27 http://www.daz3d.com/9-to-5-outfit-for-genesis-3-female-s
+ http://www.daz3d.com/juliette-hair
(+ Victoria 4, 5, and 6)

and

2) $19 http://www.daz3d.com/cailin-bundle

I also wanted http://www.daz3d.com/xiao-mei-bundle but will have no $ this time for all that...

Guys, what to you think I should get and why? 1 or 2? 1 I love for all the free victorias and those 2 g3f items, but two has that amazing hair and outfit... hm....

How much time do I have to choose before those sales disappear?