The Commons - Daz 3D Forums

Has the vendor Gordana disappeared? With the Legionnaire Textures.

Pack58 — Sat, 01 Oct 2016 07:30:02 +0000

The old Legionnaire set by Kring (http://www.daz3d.com/legionnaire) is on sale but when I went searching for the texture set add-on it's gone. In fact Gordana's whole catalog seems to have disappeared. Must have been fairly rescent.

Anyone know if there is a (legitimate) way to obtain these textures?

EDIT: Bat Speeling

SOLVED: Has This Outfit Been Released Yet?

xyer0 — Sat, 01 Oct 2016 17:27:45 +0000

I've never seen this outfit. Does anyone know what it is?

Tempestart previews

thistledownsname — Thu, 29 Sep 2016 17:58:26 +0000

Tempestart has several V4 characters imported from RDNA, but most of the previews for them got cropped down to just headshots, which doesn't really tell you much about what you're getting. I purchased Assenzio and was plesantly surprised that she also has an option for an ivy tattoo covering the torso. Does anyone have previews of the other characters in the catalog?

Things I learned From the Aging Morph competition.

nelsonsmith — Fri, 30 Sep 2016 21:27:46 +0000

1 Based on the renders, the aging morphs seem to work better for male figures.

2. It is obviously very difficult to age women to that mature state before they start to really show their age and yet you can tell that they are past their 20s (rather late 30s to 40s).

We still need a gen 3 base figure that is "mature" and attractive, rather than old, or at least has the porportions of a woman that is taking care of herself into middle age, which is actually quite common in this era. PAs, such women do in fact exist.*

*As it stands Mei Lin 7 and Olympia 7 come very close as in many renders they tend to not look like standard Daz models.

ISO Early 1900's Uniform for US Life Saving Service

Charlie Judge — Sat, 01 Oct 2016 00:05:59 +0000

I'm looking for an early 1900's Uniform for the US Life Saving Service very similar to that in the attached picture. I looked at the new uniform and at Khory' Dynamic Uniiform for M4 and while there are some similarities the collar is all wrong. Does anybody have any suggestions?

Thanks,

Charlie

Thanks for sales that make you feel bad

wiz — Fri, 30 Sep 2016 03:05:24 +0000

I made the mistake of buying a couple of "debut" items and a handful of the 80% off at 6:30am, Eastern.

A couple of hours later, "flash sale" on gift cards. And, in the tradition of "flash sales", it's been on for over 14 hours. I've never seen a company that can match DAZ's talent for having sales that make you feel bad about yourself constantly. They set you up to feel like you've done the wrong thing, over and over.

I was looking forward to the last day of the sale "make up", but now I think I'll sit it out. Not like there's hundreds of dollars of stuff in my wishlist or anything.

anyone familiar with this figure?

Nosiferret — Fri, 30 Sep 2016 03:06:49 +0000

I've seen this before, but can't place name/make. Anyone else might know?

What clothing item is this?

HorusRa — Thu, 29 Sep 2016 08:54:22 +0000

Anyone have an idea? The male clothing in the promos: http://www.daz3d.com/dms-mixed-fantasy I'm in need of something like this ( for Michael 4), or even this item.
I am already aware of Barbarian King & Barbarian Outfit for M4.
Thanks

Need help downloading

gerterasmus — Sat, 05 Dec 2015 21:54:25 +0000

Had an armed robbery at my house 2 weeks ago. everything electronic got stolen, including my computer. Insurance took their sweet time, but I finally have a new computer. Missed Black Friday and Cyber Monday sales. Just trying to all my stuff back. Is there any way to download everything you bought at once, or do you have to do everything one by one?

A special thanks from Daz!

Penname — Fri, 30 Sep 2016 19:02:25 +0000

I got a banner today saying I'd get an extra 10% on featured artist catalogues and 20% off daz originals, but it's not working. I double checked the terms and can't see that I'm offside anywhere. Anyone else experienced this? I have a cart full of stuff. I guess if it's not working by later today, I'll just buy anyway and put in a request later?

No Fast Grabs!?

RCDeschene — Fri, 30 Sep 2016 15:45:54 +0000

Is DAZ not conducting any this week or did I just get them all? XD

Genesis 3 HD add-ons

Charlie Judge — Fri, 30 Sep 2016 17:12:57 +0000

Considering the improved figures in Genesis 3 models, are the HD add-ons particularly useful or needed?

Hi Res Mesh Conundrum

lancelmartin_cf51987037 — Wed, 28 Sep 2016 22:48:12 +0000

Long story behind this ... but I'd just sound stupid :) so....

I have a G2F mesh saved as an obj in the default daz pose. (Exported it to actually custom morph a clothing item) After loosing a hard drive ... with that figure on it ... I've found some meshes that I'd like to recover BUT ... they're all high resolution.

Since there is no multi-resuloution morph support in DAZ .. what is the best way (or any way) to get this shape/mesh back onto a G2F figure?

Boxing Gym Referee Poses Question

Charlie Judge — Fri, 30 Sep 2016 17:09:06 +0000

From the description of Boxing Gym Referee Poses http://www.daz3d.com/boxing-gym-referee-poses

This is an expansion pack that contains poses (female boxing poses sparring and Knockouts, male boxing poses sparring and Knockouts, and referee poses) cover boxing moves.

which suggests there are poses for the boxer as welll as the referee. Does anyone who has this set know if there are good boxing poses in this set or do I need to buy the pose bundle?

missing Gift Card Code

wolv2209 — Fri, 30 Sep 2016 15:30:50 +0000

After my purchase today in the morning,i´m still waiting for my gift card code,that i normal directly get after my purchase.......

But today...nothing happends.....i think this is a part of the problems with the server today!?!?

Has anybody this problem too?

greetings

Gismo

Transform reset relative to floor, etc.

inthanity — Fri, 30 Sep 2016 14:36:57 +0000

Is there any way to reset transforms (X,Y,Z Translate & Rotate) - whether all or individual settings - to 0 without changing the position of a figure or object? For figures, for example, I have instances where applying a certain pose modifies the Y Translate in such a way where the value does not appear correct relative to the floor.

Thanks.

Luxus not working with D|S 4.9?

mathiaskristoffersson — Wed, 28 Sep 2016 15:16:09 +0000

Just bought luxus from fastgrab but no plugin is loadedand no render option.Does it work with 4.9?

Buttom Shortcuts for Common Commands

inthanity — Wed, 28 Sep 2016 15:20:48 +0000

Is there a way to create clickable buttons to enact macros, or actions already native to DAZ Studio? I have some commonly used commands (such as edit > figure > restore > restore seclected item(s) pose) that I would like to simplify for sime saving and convenience purposes.

Thanks!

SOLVED: Eloiny Hair Scalp Poke-Through

xyer0 — Fri, 30 Sep 2016 07:19:21 +0000

Hello, Dazizens. This is my first time using this hair, and I wanted to use it without the hat. I did some minor morphing adjustments, but when I did a once-over I discovered scalp poke-through in the crown. The hair has no TopFull morph or HeadSize morph, and I'm befuddled as to how to fix it, except to maybe add 3Dream's hair cap. Any ideas, suggestions?

Megaton One outfit by JoeQuick

shadowhawk1 — Wed, 28 Sep 2016 07:04:29 +0000

Has anyone picked up the Megaton One outfit by JoeQuick yet? If so can you tell me if it autofits smoothly to Genesis 2 Female smoothly? I picked up the Zero my Hero set after several members checked it out for me. I mean if you are JoeQuick you are free to stop by and comment as well if you like

Monthly Coupon Invalid Why doesn't it work?

UHF — Thu, 29 Sep 2016 22:52:30 +0000

I can't figure out what to do or how to cause the coupons to work or identify in any why what causes them to barf.

The only error the sales app gives is, "Coupon code "09-16Save6" is not valid." Which tells me precisely zero. The internet isn't any better for answers.

I'm attempting to purchase this, which isn't on sale;

http://www.daz3d.com/genesis-3-uvs-for-genesis-2-female-s

I am attempting to cut and paste the coupon code, "09-16Save6" from my account's Monthly PA Coupon.

Is Decimator useful for old hardware?

exstarsis — Tue, 27 Sep 2016 20:44:32 +0000

Decimator! In FastGrab!

Is it useful for folks like me who have a pathetic amount of CUDA cores? At a glance $30 seems like a good stopgap measure until I can afford a new machine (or at least a new gfx card and power supply). I was desperately wishing for it when using some of Stonemason's city blocks the other day, but it was way out of reach. Now it's much more IN reach, especially compared to a GTx80 card, but that means now I want to know if it actually helps in managing scenes and rendering them faster?

Unable to search the store errors

Ippotamus — Fri, 30 Sep 2016 04:29:52 +0000

Trying to browse and search the store. But all I get in return is this:

There has been an error processing your request

Connection to Redis failed after 2 failures.

Trace:
#0 /var/www/html/daz3d.com/magento/web/lib/Credis/Client.php(378): Credis_Client->connect()
#1 /var/www/html/daz3d.com/magento/web/lib/Credis/Client.php(463): Credis_Client->connect()
#2 /var/www/html/daz3d.com/magento/web/lib/Mage/Cache/Backend/Redis.php(210): Credis_Client->__call('hGet', Array)
#3 /var/www/html/daz3d.com/magento/web/lib/Mage/Cache/Backend/Redis.php(210): Credis_Client->hGet('zc:k:94f_CORE_C...', 'd')
#4 /var/www/html/daz3d.com/magento/web/lib/Zend/Cache/Core.php(303): Mage_Cache_Backend_Redis->load('94f_CORE_CACHE_...', false)
#5 /var/www/html/daz3d.com/magento/web/lib/Varien/Cache/Core.php(158): Zend_Cache_Core->load('CORE_CACHE_OPTI...', false, false)
#6 /var/www/html/daz3d.com/magento/web/app/code/core/Mage/Core/Model/Cache.php(379): Varien_Cache_Core->load('CORE_CACHE_OPTI...')
#7 /var/www/html/daz3d.com/magento/web/app/code/core/Mage/Core/Model/Cache.php(476): Mage_Core_Model_Cache->load('core_cache_opti...')
#8 /var/www/html/daz3d.com/magento/web/app/code/core/Mage/Core/Model/Cache.php(520): Mage_Core_Model_Cache->_initOptions()
#9 /var/www/html/daz3d.com/magento/web/app/code/core/Mage/Core/Model/App.php(1183): Mage_Core_Model_Cache->canUse('config')
#10 /var/www/html/daz3d.com/magento/web/app/code/core/Mage/Core/Model/Config.php(414): Mage_Core_Model_App->useCache('config')
#11 /var/www/html/daz3d.com/magento/web/app/code/core/Mage/Core/Model/Config.php(294): Mage_Core_Model_Config->_canUseCacheForInit()
#12 /var/www/html/daz3d.com/magento/web/app/code/core/Mage/Core/Model/App.php(413): Mage_Core_Model_Config->loadModulesCache()
#13 /var/www/html/daz3d.com/magento/web/app/code/core/Mage/Core/Model/App.php(343): Mage_Core_Model_App->_initModules()
#14 /var/www/html/daz3d.com/magento/web/app/Mage.php(683): Mage_Core_Model_App->run(Array)
#15 /var/www/html/daz3d.com/magento/web/index.php(92): Mage::run('default', 'store')
#16 /var/www/html/daz3d.com/magento/web/index_redir.php(33): require_once('/var/www/html/d...')
#17 {main}

Error log record number: 964787124236

Definitely not what I was shopping for.

Need a 3d modeler or somebody

whoacowboy — Fri, 30 Sep 2016 00:27:30 +0000

Hello,

I am looking for somone to take the base andy from Poser and rig it so i can apply Daz3D body morphs and poses to it for Genesis 2 and ideally Genesis 3 as well. If you check out my site, https://figurosity.com you can get an idea of what I have done, now I would like to also offer a andy version as well that corresponds with each figure. If you are this person or know of this person, I'd love to talk with you or them or whoever. I'd also be willing to try it myself, but I really have no idea where to start. Any help is appreciated.

Thanks,

james

PS. I attached a picture of andy in case you don't know who andy is :).

Why does DAZ Studio customers like Conforming Cloths better then Dynamic Cloths ?

RorrKonn — Sat, 05 Apr 2014 16:44:30 +0000

Why does DAZ Studio customers like Conforming Cloths better then Dynamic Cloths ?

Does Anyone Know What Figure This Dress Is For?

IceDragonArt — Thu, 29 Sep 2016 15:58:22 +0000

http://www.daz3d.com/old-fashion-wedding-style ; Old Fashioned Wedding Style Dress. - No figure is listed and I don't know if its for V4 or V3.

Why dont vendors list products used in their promo images

daveso — Tue, 27 Sep 2016 14:33:37 +0000

as example..the listed image..what is the hair used?

Looking for this flower-like dress

Oceliane — Thu, 29 Sep 2016 08:43:34 +0000

DimensionTheory's Luma Lightning product included a promo render of this dress:

Does anyone knows where it comes from?

Thanks in advance.

Has octane become over priced?

deleted user — Mon, 26 Sep 2016 23:59:04 +0000

With modern tech in iray and reality + Lux.. Octane dont seem to have its edge over other programs anymore. Do you guys think Octane is over charging, with whats out there now days, or do you think it's still well worth the 400.00? The reason I ask... I bought it thhe other day. I did so to learn. I've learned Firefly, 3DL, Reality 2.5, Reality 4. Iray and now I want to learn Octane. I'm always hunting for something to learn. Mainly thats why I bought it. I can care less for the render speeds. Its nice to have speed, but I'm so used to waiting hours for renders it aint no thing to me anymore. I just get bored of the same ol render engines.

Does the 80% OFF sale exist? Where is it?

Fauvist — Thu, 29 Sep 2016 17:04:32 +0000

The banner at the top of the DAZ3D shop says "Today Only - 80% OFF over 1700 Featured Items!" You click on the banner and there's no sale. Even the Mega Fast Grab has only 330 items - and they aren't even 80% off. So where is the 80% off on 1700 items?