Hardware;

GPU - Titan X (900 series)

i7 4790k, 16gb RAM.

Ive checked the text log after the render and it appears so. See attachments with task manager and GPUz also.

Possibly im being very dim, but I dont know whats going on here. Any help is appreciated.

I have a dilema. I lost a custom morphed G3M figure from the base figure. i came across a wavefront I made during the construction but it has the hair figure and anatomicals on it. ok. I managed to rig transfer and texture the figure. ok. Now I have a finished looking figure with elements on it that are now part of the pelvis area geometry and hair figure that is part of the head geometry and clothes don't work. Without having to redo the figure from scratch, is there a way I can just get the head morphs (remembering that the hair figure is part of the base figure geometry now) I tried MLP but error that the geometry is not the same, duh.(I tried) Is there someting I else to do to get around ? Tried shaping preset. Thanks

1 -- I make my morphs via d-forms inside of Studio. No, I can't do it in Blender. I'm too much of a newbie in Blender yet, nor do I have a grasp of the Morph Loader/Pro. It's on the list to learn, but I'm not there yet. So all my morphs are done natively inside of DS, via D-Forms.

2 -- Once I get the morphs working, I have everything functioning the way I want, sliders set up the way I want, then I save the figure/prop asset. Everything is fine. In fact, it might be "fine" for days on end. Then all of a sudden, some but not ALL the morphs on an item decides it doesn't want to function. Dials remain in place, the morphs are within the /data/ folder, but turning the slider does NOTHING at all. The morph just randomly ceases working.

Is there any reason for this? It is driving me up the WALL at this point. I've had to re-make morphs on the current project at least a dozen times now, and I'm getting rather fed up with the random non-functioning of morphs that previously worked just FINE.

Is there a bug I don't know about with d-form created morphs? And why does it only happen on some projects, but not others? And why does it only happen with some morphs, but not others? And why does it only happen with figure/prop assets that I've made myself, and no one else's? It's getting to the point of being absolutely infuriating because there is no rhyme or reason, and I can't establish a pattern. It's entirely random.

Thanks.

I attached an image as you can see the background is squished. If i want to put my figure against real life backgrounds this isn't possible. 

I was working on a morph for G3. It was a thigh morph. Alas, I had inadvertently made some other changes to the G3 figure. Now when I merge the base G3 figure into a scene, the new figure carries these other changes. Is there some way to return the G3 figure to its stock shape and retain only the thigh morph that I created?

I might have to undo the freeze completely. Then recreate the morph more carefully. I'm OK with that. Uninstalling G3 and reinstalling could work, but I fear that could upset the database with disastrous consequences.

It seemed to install through the Install Manager. I made sure to install the DS version (not the Poser Version). 

I'm looking through aniBlocks and I can't seem to find the new aniBlocks anywhere. I also looked in "Content Library" directories and they weren't there with other aniBlocks.

I tried uninstalling and reinstalling product, but still no luck. 

Any ideas on what I might be doing wrong and what I can do to access new aniBlocks? Thanks for any help..

Is this happening to just my system?
Do I need to install the free player as well? Surely not.
Does it clash with Garibaldi? But it worked OK yesterday with the free player.
Running Win8 A10 3.4Ghz 8GigRam 64bit - Studio 4.6Pro 64bit and LAMH 64bit Plugin.

The main reason I bought it was because it was on sale and I could use all the presets and future releases.

Question. Is this item covered by the 30day money back guarantee despite not being activated by DAZ?

Any Ideas? Help would be appreciated.
Thanks.

/EDIT Just got Alessandro_AM's link in another posting regarding an update.
http://www.daz3d.com/forums/viewreply/439286/

the selfie stick seems to work, loads in hand and there is a camera, but the phone has no camera and does not load into the pose as shown on product page. if you spend  oney on something it should work right? i cant find any usage guide either, seems like an unfinished product. i wanted to save time to get selfie style renders, but this is a hassle

I get the infamous message "Error Opening File" when I try to open a scene that it opened without any problem since yesterday. It says to me to see the log file, but it's just an endless sequence txt file. I tried to merge the whole scene in another one as alternative attempt, but I get the same message. 

Any thought about what to do?

Thanks

When this happens, it somehow overwrites my own Victoria 4 for Genesis 2 Female and in the shaping tab it combines?... turns to (2) Victoria 4. 

This would be fine, except when I use the slider that Gen X2 provides, the characters mouth is always slightly open and Victoria is always on her tip toes when I slide it all the way to 1 and her face is slightly off.

So I'm looking for an explanation or solution incase I'm completely missing something.

When I click on it, randomly and based on the camera angle, it goes away from the model I selected instead of go next to it!
I noticed it seems to have some kind of "logicity", if I rotate a bit the camera angle, it sends me a bit near of farther from the model... And I have to find the "right" angle to finally have the model next to my sight!

It's a bug of my copy or it's a bug for everyone?

But when I move the camera around,  things are getting bigger / smaller / further away etc..

So I placed a default camera, and everything looks a lot better and not getting dizzy..

I checked the settings for both,  since i was already 10 scenes in, and now I can start all over again...  

Where is the setting that makes the camera having a deep depth ?

Ho acquistato il pacchetto Genesis 3 Male Expressions, una volta installato ho modificato il personaggio G3 , ma quando vado a inserire un'espressione non la trovo nell'elenco.... come posso fare?

Sorry, I hope there is someone who can give me some Italian aid is involved if possible

I purchased the Genesis package 3 Male Expressions, once I changed the G3 character installed, but when I go to cast an expression can not find it in the list .... how can I do?

I'm trying to use these hairs with Iray but watever color I use they show gray like the texture insn't seen by the rendered.

When I try to change color, the hair color show in the viewport but not on the render.

Edit: Aparently it's not on all the colors, the brawn and black hairs show gray but not some other colors I tested changed the tint.

Edit 2: No they are all messed up, the hair cap turn solid color on all of them so they are all inusable.

Steps:

Obj1 has two zones.

Obj2, a copy of Obj1, has two zones, but the zones are remapped.

I want to copy Zone A mapping from Obj1 to Obj2.

I import Obj2, do Load UV Set.. from Obj1, name it something.

New UV ... is unchanged from the original.

I've tried this a bunch of different directions, and it seems to have no effect whatsoever.

So I purchased this product, the Dyanmic Romantic Shirt and it's great!

http://www.daz3d.com/dynamic-romantic-shirt-for-m4

But I can't seem to apply the styles that were included with the basic white shirt. You can see in the product that the styles include things like tucked/untucked, patterns, and various lacy bits. I found these inside my DAZ library. However, when I select the shirt and then double click the style, I get a little loading bar animation, and then... nothing. The style does not change. (If I click double click the styles while the shirt is NOT selected, I get an error saying that I must select an object to apply the style to, of course).  I checked the files for these "Styles" and they are .DSB files. Does anyone know how to apply them? I included a screenshot so you can see what i'm working with here. 

Also works with any Genesis creature or Any prop with any surface that it has at least one diffuse map (You may need to manually apply if it contains extra surfaces)

However, it looks like all that's in the shader folder is a set of various scripts for Genesis, G2 and G3. I'd like to try this shader out with other things (for instance, if I have a character with extra elements such as wings), and it'd be interesting to see its performance on props or animal figures. There are even a few examples of such use in the promo images, so there must be something I'm missing.

If the creator or anyone else can advise, I'd be most grateful :)

-A

I never find indoor scenes easy to get sufficiently-well-lit, but usually get somewhere. Any suggestions how to overcome this?

What can I do to overcome these patches? I don't actually know which figure is shown but it is a Gen2 morph. The adjustments available for the hair don't help.

If I replace the figure with another, the problem is not present, so it is presumably a character head shape problem.

Thanks! 

Does anyone know how to add metadata to a zip install package?

Any tips or special steps that can make this easier?

i'm not sure why a drape will not collide with a surface that is selected in the collision dialogue box?  As you can see, the opitex figure drapes on the torus, goes thru the table and drapes on the plane but not the table. Thanks

For creating content, what is your opinion and why.

I currently use Blender3D, 3DCoat, and Subtance Painter and Designer..

Any opinion on this would be appreciated.

Thank you.

Thanks in advance!

Any help with this situation please?