It is supposed to have:

    00_HD Visemes
    AAHD
    EEHD
    EHHD
    ERHD
    FHD
    IHHD
    IYHD
    KHD
    LHD
    MHD
    OWHD
    SHD
    SHHD
    THHD
    UWHD
    WHD

The ONLY morph that appears is: 00_HD

In deciphering a few of the unfindable morphs, allegedly their path is: "group" : "/Hidden/Pose Controls/Head/Visemes"

There is NO such folder on the Parameters Tab.

The 00_HD is not listed as hidden and is shown at the location Pose Controls/Head/Visemes

As these appear to be somewhat complicated morphs {as well as HD} - thought I would ask before putting in a CS -- are not all those other morphs supposed to be findable in D/S?

......

edit ... solved. I thought I had show hidden checked but apparently did not, and apparently some hidden folders will show IF they contain unhidden content. I know how to confuse myself real good lol ...

I am starting to build a new machine.  My current machine, which is fine for most of what I do, just doesn't have the umph for rendering with any alacrity. My current machine; Intel I5-6600 (4 cores), 8Gb memory, Nvidia 1050Ti Graphics card. According to my System panel, I have a 5.9 Windows Experience Index.

I have to say my budget is severely limited. I can spend a few hundred here and there, so it will take time to build. I'm currently looking a I7 processor (maybe I9, but a newer I5 would still be an improvement). 16Gb memory, (but probably 32Gb). And either an Nvidia 1660 or Nvidia 2060.  This system isn't exactly a barn burner either, but definitely an improvement.  So I was thinking. Maybe I could add a second graphics card at a later date? and the two cards together would boost rendering times.

So that's the question. Does Daz rendering utilize multiple graphics cards? Or only one?  If I add a second card, will that improve rendering times? Or is it a waste of my limited money?

I've been reading, and haven't found any definitive articles... yet. (I will continue to research).

Thank-you...

Lyndon

But when I remove the shoes, the feet remain hidden. How do I make them visible again? It'd be nice if the artists provided some sort of button to hide/show feet, but there's not. (There are buttons to hide the hoodie and sleeves, but of course, no way to bring those back either.)

Thanks in advance.

I don't know why.   And also the Documents folder from My PC is used.  I would expect some Documents folder to be created in my E drive and that to be used.

I have had crashes both when rendering, and when using the 'NVIDIA Iray' display mode.

More specifically, I think I'm getting a crash when my resolution is too high (I think 4800 x 7100 crashed, 2400 x 3550 did not) and/or when Progressive Render Max Samples is set to 15000 (I'm not an expert to please let me know if that setting is bonkers...).

I am also definitely crashing when using the display mode and changing the scene, like by shifting the camera or rotating dome lighting.  Not every time, but enough to make me save lots.

As I said this is a new card so I don't know if this is a hardware problem.  The only piece of software that is acting up is Daz, but I haven't played with many other pieces of software, so that's not really sayng anything.  The screen did go completely black at one point, which required a reboot (usually Daz just crashes to desktop).

This card has 6GB GDDR6 memory.  The drivers are updated.  My windows 10 drivers are also updated.  The only other thing I can think that might possibly be in play is that I installed Daz on C: which is my SSD, and now it's nearly full (I want to pull my content off of it as soon as I figure out how, as reinstalling everything takes forever).  Does Daz need room for "swap space"?

The bottom of my latest crash report log ends with:

2019-07-08 16:47:47.940 WARNING: ..\..\..\..\..\src\pluginsource\DzIrayRender\dzneuraymgr.cpp(302): Iray FATAL - module:category(API:MEMORY): Memory allocation failed.

...many times.  Could this be a hardware problem with the video card?  Is 6GB enough memory on the card?

Not all of my logs end that way though :/

LONG VERSION: So since 4.12 came out Ive been having issues whereas even with a basic scene, sometimes a single figure, DAZ wants to switch to CPU drawing. This runs my CPU temp up and redlights my motherboard bogging down my rig and possibly damaging my hardware. Happen very quickly for every render. This is on an i7-7820x @ 3.6ghz, 32gb Ram, GTX1080 11gb (plenty Vram) (Latest Studio Drivers), Win64, non potato. 

The logs only error warning was the "IRAY OPTICX No Longer Supported" message. (My thought was OpticX is only for the Newest NVIDIA RTX 20's series cards so I thought it might be a Coding Error with GTX 10 series beyond my capability to fix.)

Well its was still a nusance so I tried clearing the DAZ cache temp files as suggested on the support page. (this helped for a very hort time it seemed but still encounter the problem a little time later, so I was trying to make a habit of clearing the temps regularly but it was still happening)

I thought, ok well, what if its my render settings or draw settings. So I ditched my settings and reset all to default. (No No change) 

HOWEVER, I did notice that my default Dome Map was the old RuinsB map and since I wasn't using it I turned it off setting it none, I could hear the strain come off the system as soon as I did, and unlocked cool new environment settings in the process. 

I have been turning off the HDRI Map RuinsB when I start DAZ ever since and havent had a problem yet, until today, when I forgot to turn the map off and got the red light again. (note NVIDIA also did do a drvier update recently)

If anyone else is having this issue and using the old RuinsB map or other map try turning them off and see if this solves it for you. Would be good to have a second tester to help validate the source of the issue.   

I used to install and resintall Daz Studio trying to keep an efficient library. Everytime I installed everything on DAZDIM and then unistalled the things I never use.

This week I did a clean installation of Daz, but now there's an option to simplify the task and only installs the basic products called 'Default Install Sets'

My problem right now is, I can't find the eyes pose control sliders as usual selecting the character's Head and in Parameters > Pose Control > Head

Does anybody knows what product do I need to install in DAZ3DIM in order to get those sliders back again?

Thanks in advance.

Dan

So we've been battling the zombie dog with an issue that has come up before (with other products).

Daz crashes on save when we get to the Writing Assets stage.

It's fine if we have only ONE (zombie) DOG in the scence. Soon as we add 2, it can't save the scene.

What's consistent is- there being more than one. Doesn't matter if I use Node Duplicate or load a second dog from scratch.

Individually, I can load them and save them, but once the scene contains more than one figure- it crashes on Save.

--------------

I'm thinkin it's related to scene IDs or some such mix-up, but I can't remember off-hand how I used to work those areas.

(I've already exhausted tons of time thinking it might have been tied to morphs or a skin texture/material or memory and Daz build or what else in the scene.....so no, it's ONLY the Zombie Dog causing the issue.)

Who's got an idea of where to attack next?

In attachment I have the first pose from the link - you can see it's ridiculously different. I've tried parenting the martini glass, the model, adding the pose without the prop... It's really frustrating especially since I have so little time to work on my art and have to constantly ask for help lately...
Thanks for your time :)

This is so odd. I can't figure out why the pelvis would remain tilted when all the controllers are set to zero.  

Image removed

The right and left thigh have been symmetrified with the exact same values except negative.

Why is the Pelvis tilted? How do I fix that? I know I can just reset the pose, but I want to figure out how to fix this problem in case it happens in the future again.

Edit: I forgot about the hip.  There's a Hip and a Pelvis.  I had to reset the Hip Bend, Side-Side, Twist controllers to zero in addition to the pelvis.

This hurts me because I used to put things into groups primarily to allow me to hide all those things together with one mouse click.

Is there some other way to hide groups of things, now that the regular grouping feature no longer allows it?

Right now, I have an NVIDIA GTX 1060 GPU, Intel Core i5-7500 @3.40GHz, and 16gb of RAM. 

Render times aren't AWFUL, considering I try to render at dimensions of 3200 or above. What should I consider upgrading first, do you think?

Thanks very much!

Software - Windows 10 - Daz Studio 4.11
I want to stop my render destination folder filling-up with icon.png's
Only happens in the main folder not in sub-folders - so not being created by Windows.
icon.png's only created while Building Interface is active at Daz start-up, not after each render.
Windows 7 did not have this problem - anyone know how to stop this?

https://www.daz3d.com/z-glute-shapes-pose-partials-mega-set

The first Preview, with the pink boys have the message "Before Squish Morph1" & "Before Squish Morph1" I guess, the second should be "After" :)

cuz I dont know how to PM.... I write it here :D

Btw: in my "Messages" I cant find a option to SEND a message... only see a inbox... hmmm

Surface Pro 4, Windows 10.

Error report included.

I really like this program and don't really want to go back to Poser. Can this be fixed?

For Christmas my wife bought me an RTX-2070 Super GPU and I was hoping to see a blazing improvement over the CPU which I been using for a year now.    So I installed the card as per instructions, I downloaded and installed the drivers from the Nvidia site AND I updated Windows.    In Daz Studio (I have version 4.12), I made sure that under the Render Tab - Advanced Settings that the CPU was unchecked and GPU was checked.  So for a test I loaded up a render that I did previously using just the CPU and that render took 10 hours to get to 80%.   I would be hoping that the RTX-2070 could get the job done in one hour.  So I set up my machine, left for an hour and came back to find the Render progress at only 400 iterations and at 0% still.   The render that was done in that time still looks grainy.

Another test I did was to check out the Iray mode over the Textured Shaded mode and panning and zooming I expected to be pretty smooth in Iray mode and again, I don't see much improvement at all.

So before I take the card out and send it back, I am wondering if there are other settings that I am overlooking?

For $500+ for the RTX-2070, and for the benchmark tests I looked at before I bought the card, I was expecting my render times to be cut down by 1/10th the time.   I would be even happy with 1/5th the time.  But if this is all I am getting out of this card, it is going to go back to the store.   I would be better off getting a faster CPU.

Any assitance would be appreciated.

Thank you,

Geo

I was just trying to figure out why a blank chararacter would take minutes to load in an empty scene, and saw this line in the log file:

2020-02-05 01:01:54.318 WARNING: ..\..\..\..\..\src\sdksource\fileinput\dzassetdaz.cpp(5818): Could not find target property for formula: Genesis3Female:/data/DAZ%203D/Genesis%203/Female/Morphs/DAZ%203D/Eva%207/FBMEva7.dsf#FBMEva7?value in file : /data/DAZ%203D/Genesis%203/Female/Morphs/fabiana/KillerLegs/FK-AACtrlEva7.dsf

While I own Killer Legs Morphs For Genesis 3 Female(s) (SKU:37805), I don't have Eva7 which is not a required product.

What should I do?