Technical Help (nuts n bolts) - Daz 3D Forums

i have problem when i want to install Ultimate pose master manually

soufianelkouissi — Fri, 17 Apr 2020 22:10:21 +0000

hello, please can you help in install ultimate pose master manually

first i move all files into C:\Users\Public\Documents\My DAZ 3D Library

its the folder of 3d daz that show in the software but the problem when i want to run the script its show an error

in error log its show this

2020-04-17 23:07:12.453 Loading script: C:/Users/Public/Documents/My DAZ 3D Library/Content/Scripts/Ultimate Pose Master/Ultimate Pose Master.dse
2020-04-17 23:07:14.237 Saved image: C:\Users\HP\AppData\Roaming\DAZ 3D\Studio4\temp\V3D\Pose Tools\\InitialPose.png
2020-04-17 23:07:14.610 WARNING: Script Error: Line 316
2020-04-17 23:07:14.610 WARNING: TypeError: Result of expression 'oRFHelperNode' [null] is not an object.
2020-04-17 23:07:14.610 WARNING: Stack Trace:
()@C:/Users/Public/Documents/My DAZ 3D Library/Content/Scripts/Ultimate Pose Master/Ultimate Pose Master.dse:316
2020-04-17 23:07:14.644 Error in script execution: C:/Users/Public/Documents/My DAZ 3D Library/Content/Scripts/Ultimate Pose Master/Ultimate Pose Master.d

Graphmate or How to flatten that morph line

GaryGraphic — Wed, 15 Apr 2020 21:14:14 +0000

I created an animation with a walk aniblock, baked it to keyframes, then decided against it later. BUT... now I can't get rid of the soft body bounces.

How do I flatten or get rid of those lines. I don't want to unanimate what I do have with a clear animation (don't wanna throw the baby out with the bath water) but I just want to get rid of the bouncing.

Anyone?

Can view translation be turned off?

Serene Night — Fri, 17 Apr 2020 17:49:37 +0000

I have angered the view translator gods. As a result my new mouse and this feature are not happy together. Must I endure it and keep my left hand poised on the undo shortcut?

How can I morph or change the polygon size of an object?

1012creativevision — Fri, 17 Apr 2020 15:08:21 +0000

Hi, ive tried to attach an example of the help I need. I basically have a soldiers hat but i'd like to edit it to look slightly different.

I have A, B and C questions if this makes sense.

A. I would like to be able to fill in an area where polygons are missing so it smooths of the top of the helmet.

B. The hat and strap are a grouped object. I can select the strap as a surface. Id like to be able to take the strap and scale it to a slightly different size as well as morph the top of it.

C. The helmet needs to have the front section altered. I would like to be able to grab the front polygons and move them or morph them into a diffent shape justy on the front. The lower section of the example is roughy what im trying to achieve.

Can anyone help me on this please? Thank you.

Jase

HD Morph Detailing Creation?

ArtXtreme101 — Fri, 17 Apr 2020 16:40:53 +0000

Hello! I'm currently developing a character, and I would like to make some hd detailing morphs for it. Would love to know how to go about doing this!

Thanks!

Program won't open

katiefrymire — Fri, 17 Apr 2020 14:46:11 +0000

I have downloaded the program but when I sign in it closes the program and does nothing. I'm really confused so can someone help me, please.

Kyoji Eye Brows?

Gemini Queen — Thu, 16 Apr 2020 23:14:10 +0000

So I recently bought this for my Genesis 8 Male, and the problem is that I can't seem to find his eyebrows. I found the material where it's supposed to be, but when ever I double click on it, or click and drag, then nothing happens. I see his eyelashes change color, but no sign of his actual brows. I'm going to render an image really quick to see if it comes up.

Need Kisses

Jenner2005_214fc98680 — Fri, 17 Apr 2020 09:18:10 +0000

I have the Standard Genesis 3 and 8 Female.

How can i manage, that ,my Chars are Kissing each other ? I need the Morphs from the Lips.

Are there anywhere the Morphs for the Lips, oir can i manage it with the Basic Morphs ?

Renders are crashing when closing down....

jontaylor99 — Wed, 12 Jul 2017 05:13:28 +0000

I'm wondering if any of you guys have had expeirence of this problem or whether someone might offer some suggestions as to what is causing it.....

I set up my scene and render just the same as always, the pop out picture comes up and I sit and let it render, sometimes I have it set to 95%, sometimes 98% and sometimes 100% none of these make any difference, the scene picture completes with no problem everytime and I get a great picture..... Then the trouble starts, while DAZ is closing down the render it crashes and I end up with a white screen inside what was my rendered image and a massage saying DAZ 3D has stopped working and needs to close. This is only happening as I say straight after the render has finished, it never happens at the start and it never happens anywhere during the proccess, always right at the end whilst closing everything back down. I thought maybe my scene was a little to heavy so I loaded just a medium size scene up and rendered that but the same thing happens, I then tried a relitivley small scene and it still crashed the programe. I've also tried this at several different render settings and it is still happening, this seems to have started around 4 days ago but it has slowly got worse over the last couple of days.

I'm rendering in iRay and I'm using a Gtx 980ti with 16g ram and 3.2g CPU, if anyone can give me any suggestions, they're most welcome.

outside very dark renders....

cosmicdawnseries — Thu, 16 Apr 2020 07:57:02 +0000

my renders look very dark doing outside night time is there anyway i can light it up eyes look black :(??

How To Keep The Original Clothing Size?

LenioTG — Thu, 16 Apr 2020 08:53:32 +0000

Hi everyone!

A thing I've never understood with Daz, is how to keep the original size of a piece of clothing, avoiding the auto-follow/transform that comes with every element of the wardrobe.

A situation I often find me in, is to shrink a figure.
I don't want the clothes to follow that shrinking, instead I'd like them to keep their original size, and then let dForce make its magic.

It's not impossible to give a realistic effect for small changes: I transfer the piece of clothing, then I use Fit Control and I apply dForce.
But, as it shows in the attachment, the results of this method are underwhelming when the size change is noticeable.

What am I missing?

Thanks in advance for your help!

EDIT: I had forgotten to modify the weight in dForce, you can see the result with all weight filled.
Still, is there any way to keep the true original size?

Can I safely delete .zip archives from this folder?

yaruuvva — Thu, 16 Apr 2020 06:14:58 +0000

[Can I safely delete .zip archives from this folder?] C:\Users\Public\Documents\DAZ 3D\InstallManager\Downloads

I takes more than 20GB and contains files like IM00021750-01_Victoria7.zip

Custom Colors for Hairstyles?

Gemini Queen — Fri, 17 Apr 2020 00:16:21 +0000

So I bought the Viktor Long Locks for Genesis 3 and 8, and I located the 5 colors that it comes in. However, the character that I'm trying to create has a color of hair that is not avaiable for me to select. I tried looking in the shop for like a "hair dyer" for hairstyles that don't come in all colors, but I couldn't find one. Nor could I find the "color package" that most hairstyles have sold separately. Could someone point me in the right direction as to how I could change the color? Whether it be something that I have to buy or something that I already own? Thanks.

Slow Install Manager download speeds

ACue — Thu, 16 Apr 2020 16:48:48 +0000

Not sure if the issue is at my end, but my download speeds for purchases have slowed to a trickle. I double-checked my broadband connection and I am getting fast internet, completely normal. But Install Manager download speed for products purchased today are fluctuating from 1.5 Mb/s to .180 Kb/s. Taking forever to download the latest Bluejaunte product, for example. Anyone with similar issue? I suspect that my carrier might be throttling downloads due to extraordinary pressure on telecom services. Hard to tell. Does anyone have feedback or similar experience to share?

Morphing Python IK help

takanuinuva_40f6ab6ae5 — Fri, 17 Apr 2020 00:40:51 +0000

Everything I spawn in a morphing python. It has an IK -Python Neck child attached. And it makes the neck move when I have a (neck bend after) morph active from shaping

How can I set it so this IK neck child doesn't appear when I spawn the morphing python?

I'm Having Issues With CC Zophael Tail

sorakuno — Thu, 02 Apr 2020 19:33:07 +0000

Having been looking for a classic devil tail for a while now, I was ezcited to find CC Zophael (just one day after suggesting a demonic tail, funnily enough) So I hopped on it as soon as I saw it in the store today. Now I know it's a brand new release, only a few hours old, so some bugs are to be expected, but if no one tell the creators they may not find out about them, so here I am.
My issue is two fold (well, 1.5, really)
First, and most pressing, The pose controls included with the product don't appear in my Parameters tab preventng me from haveing any suggestion of life on the tail without paintsakingly going through the basic pose controls of each and every node. Oddly enough it doesn't seem as though the files are missing, as they show up when the tail is the only thing in the scene. But when I parent it to a figure, they disappear.
This problem began when I attempted to fix the second problem, which I will get to in a moment, by uninstalling and rinstalling the produch every way I could think of, Connect, DIM, manual installation, even just updating the metadata hoping it would find the missing files. These attapts have failed to remedy either problem.

Now, on to the second problem. I get a missing file message whenever I try to load the red Zophael textures. Blue and base skin tones work fine though. Depite the error message, the textures do appear to load once the message is dismissed, so it's only a minor annoyance. I had a similar issue with the Count Outfit a while back, and it turned out to be a left over path from develompment, according to the creator. Could be a similar issue or something completely different, but I thought it was worth mentioning.

I've attatched screenshots to you can see just what I'm talking about.

anyone know how to create custom action for st limits off (rotation)?

inverted normal — Wed, 15 Apr 2020 20:58:06 +0000

Was looking though the customization browse tree, didnt see anything. I suppose there would need to be a script? Anyone happen to have one handy? I'd love to hotkey this so I can easily toggle it on/off on any given node I'm in the middle of posing, without having to move the mouse.

Is it possible to delete/remove buttons from this shirt

1012creativevision — Thu, 16 Apr 2020 20:22:47 +0000

Hi, Forgive me as im fairly new to Daz3d. This is a general question as once I know how to go about doing this there are other sections I will edit. But my basic question is:

Is it possible to remove just 3 buttons from this shirt? But keep the remaining buttons with out deleting all the buttons.

regards

Jase

Genesis 8 Female Body Morphs - how to use ?

skywatcher_43ee7e5590 — Fri, 16 Jun 2017 14:23:54 +0000

I downloaded and installed the 'Genesis 8 Female Body Morphs' (also the '...Starter Essentials') but i can not see them anywhere.

How can i use them ? I expected the additional Morphs to show up in the Menu on the right where i can change size of body parts etc...

Geoshell graphic Driver bug

Loony — Thu, 16 Apr 2020 19:54:06 +0000

Hi,

I have here a repeating Bug, which get normally fixed bei reinstalling my Nvidia driver.

It does affect the Geoshell, ONLY the geoshell.

It will destroy random overall over the geoshell bodyparts.

Does anyone know why this happen and is it something that should get reported to Nvidia or to dazStudio?

Some morphs not showing up

User 4876 — Wed, 15 Apr 2020 21:46:53 +0000

Some of the PBM morphs for Genesis 8 female are not showing up within Daz Studio. I have gone bck to the features within the morph package and identified they should exist, have found them in the correct data folder but they will not be rcognized within DazStudio. I am running Daz Studio 4.12 on a Mac. They have worked fine before but I can not make them work. I have tried working remotely (offline) but when I load a model and check on the surfaces pane, it shows the path back to the cloud folder within my library. So it appears that the model uses some data that is from the cloud. Any advice you could give would be appreciated. I badly need the morphs to attain a desided outcome on a pose.

KitBash3d

KeithH — Mon, 17 Jun 2019 22:55:13 +0000

I downloaded the freebies that kitbash3d gives you for signing up for their mailing list. I cannot find any tutorial on how to use them in Daz studio.
Does anyone have a a link to a tutorial for importing and using the kitbash3d items with daz?

thanks

DAZ Install Manager: "Download Failed" trying to update Karen 7

steve.m.read_443e6bbce0 — Wed, 15 Apr 2020 20:14:48 +0000

Does anyone else see this problem? Ages ago I bought Karen 7, and DIM wants to update it, but cannot, giving "Download Failed" at the end of the download. At the end of the log file is:

WARNING: Network Error: C:/Users/Public/Documents/DAZ 3D/InstallManager/Downloads/IM00022420-01_Karen7.zip.{c5f2eba7-3e7f-47bf-1b29-60fd7519cf50}.part :
Could not complete download, file size does not match; 89025874 != 89114271.. Temporary file removed.

A direct download from the web site gives me a file that is, indeed, 89025874 bytes.

What's the recommended procedure in this case?

Multiple Item Selection

ronwstewart — Mon, 08 Jan 2018 01:36:43 +0000

Hey there,

I migrated to a new PC, reinstalled Daz, and migrated just about everything over... however I seem to have lost the ability to select multiple child objects (of a rope, chain, or even feet/toes, for example) to set their parameters the same. I can't remember what setting enables that. Thanks in advance!

Bug: Render Darkens Everywhere, Except At The Bottom

LenioTG — Thu, 16 Apr 2020 13:38:40 +0000

Hi everyone!

Lately, I'm having this bug more and more often (attachments).

Basically, the bottom of the render stays normal, but the rest progressively becomes almost black.

It happens with Render Queue (https://www.daz3d.com/render-queue) and sometimes when I look at the render preview and I scroll.

The scenes are normal. The VRAM is available.
I've launched the same scene with Render Queue 4 times, and it ended up like this everytime, then I've launched it normally and it rendered at the first take without any edit.

I'm using Daz 4.12.086 on Windows 10 Pro (Ryzen 5 1600, 16Gb 2400Mhz RAM, RTX 2060).

Does this happen only to me?

Easy removal rather than 1 by 1 - NVM, backed up user data and did a reset

gitika1 — Thu, 16 Apr 2020 14:54:05 +0000

I recently did a review of all my content and did "Spring cleaning" removing products that I will never use. (Via the DIM). Now I have a plethora of these:

I know that it is possible to right click and delete each item. Is there a faster way? I removed approx 1000 of the legacy products and each time you delete the reference in the product list, DS collapses the library tree. You have to click/dig through the lists again to right click on the next uninstalled product.

I would prefer to avoid a database reset, since I have an extensive custom categorized system. I did a reset one time and it took months to recategorize everything.

Thanks for any help you might be able to share.

Fibermesh Brow & Lash Creation?

ArtXtreme101 — Thu, 16 Apr 2020 13:54:37 +0000

Hi all! I was wondering if anyone had any advice or tutorials on how to make fibermesh brows and lashes? I'm in the process of creating a character and I'm not sure how to go about making the brows and lashes. What software should I use?

Any help would be greatly appreciated!

Thanks!

Fixing a JCM

acharyapolina — Thu, 16 Apr 2020 09:53:41 +0000

Hi I am modeling a shirt and would like to figure out how to fix a JCM or create a morph for the shirt that fixes the problum.

I created a video to help show my problum.

Here is the link

https://drive.google.com/file/d/1uf0iiSOhaHxJuGzTEFZ32AN_A9fpoGrc/view

Every time I export my shirt, fix the problum. I am only use a smoothing brush like in zbrush so no vertexes are added or taken away, so it should work. but when i import the model in moreph loader pro, and create the morph. When i dial up the properties all i get is my shirt turning into an explosive mess.

Any help is greatly apriciated. Thank you so much

Dforce wind node Hair blowing

cosmicdawnseries — Sun, 12 Apr 2020 04:01:18 +0000

hey guys i want make a animation using dforce windnode to create a hair blowing effect like this ? has anyone got any advice or know what i can do to create the effect please thank you :)

iv tried but i cant do it :(

thanks and i hope your all well <3

Legacy, PoserCF, PS, Poser versions—Can I delete them?

mavante — Wed, 15 Apr 2020 19:52:56 +0000

I will never use Poser for anything. In the Daz universe, I exclusively use Daz Studio 4.x. Some products have come with versions that have "Legacy" and "PoserCF" or "PS" or "Poser" in the name, and have been installed over the years.

Can I just delete them if I'm never going to use them? If so, how, exactly, do I safely and effectively go about it?