Digital Art Zone

 
   
2 of 3
2
Secrets of the DAZ Studio 4 Pro UNIVERSE!
Posted: 29 April 2013 05:48 AM   [ Ignore ]   [ # 16 ]
Administrator
Avatar
RankRankRankRank
Total Posts:  15812
Joined  2003-10-09

Most pictures should still be there, once the link is adjusted.

 Signature 

DAZ Studio Frequently Asked Questions

Index of free DAZ Studio scripts and plugins list

Profile
 
 
Posted: 09 July 2013 08:26 AM   [ Ignore ]   [ # 17 ]
Member
Avatar
Rank
Total Posts:  52
Joined  2006-06-18
chohole - 26 March 2013 06:32 AM

If someone would care to make a list of which links are broken, we can attempt to update the post.  Thanks

I came across this topic, and it seemed like an excellent resource, until I found (as have others) that many of the links are broken, and it is old.

There doesn’t seem to be much point in making a list of broken links.  The author can easily tell which links are broken by clicking on them, and it seems that would be more useful, in fact, than having a list.  In any event, the author would be the one who would have to fix them.

If it is important enough to be sticky, then it should be important enough to spend the relatively small amount of time it would take to fix it.  Is it possible to do something to make this happen.

Thanks for your time.

Profile
 
 
Posted: 09 July 2013 06:38 PM   [ Ignore ]   [ # 18 ]
Power Member
Avatar
RankRankRank
Total Posts:  2331
Joined  2005-09-05
Kenneth Evans - 09 July 2013 08:26 AM
chohole - 26 March 2013 06:32 AM

If someone would care to make a list of which links are broken, we can attempt to update the post.  Thanks

I came across this topic, and it seemed like an excellent resource, until I found (as have others) that many of the links are broken, and it is old.

There doesn’t seem to be much point in making a list of broken links.  The author can easily tell which links are broken by clicking on them, and it seems that would be more useful, in fact, than having a list.  In any event, the author would be the one who would have to fix them.

If it is important enough to be sticky, then it should be important enough to spend the relatively small amount of time it would take to fix it.  Is it possible to do something to make this happen.

Thanks for your time.

Hi Kenneth,

I remember when this thread was set up and the links did all work at the time. I would suggest that it’s good practice that if you find a broken link on a thread like this to pm the OP so that they can fix it.

I used to maintain the Shadermixer List can’t anymore as it was transferred by someone else to the new site but my point is that if you let the OP know of broken links then they can do something to fix it. Once a thread is set up and has been there for a while broken links can occur and aren’t noticed until someone goes to use them.

The logical thing to do if you find a broken link is to let someone who can fix it know. Have you or the others who located broken links pm’ed the OP to let them know about the broken links?

Thanks

Pen

 

 Signature 

Shadermixer tutorials and recipes
My ShareCG Gallery
Shadermixer Documents

Profile
 
 
Posted: 09 July 2013 06:41 PM   [ Ignore ]   [ # 19 ]
Power Member
Avatar
RankRankRank
Total Posts:  2331
Joined  2005-09-05
visibleman - 06 June 2012 09:40 AM
PaulSW - 05 June 2012 02:49 AM
DAZ_bfurner - 16 April 2012 02:48 PM

Secrets of the DAZ Studio 4 Pro UNIVERSE!

Geo-Grafting

How can I add another limb to my model? What is Geo-Grafting?

Answer

Answer #2

Answer #3

Please, please, please Daz, can you do a Youtube Tutorial on this? I gave up with my tries to get it working.

Yeah, That would be nice.

Hi, just wanted to let you know that Blondie’s advanced rigging tutorial explains how to do this really well.

 Signature 

Shadermixer tutorials and recipes
My ShareCG Gallery
Shadermixer Documents

Profile
 
 
Posted: 10 July 2013 12:36 PM   [ Ignore ]   [ # 20 ]
Member
Avatar
Rank
Total Posts:  52
Joined  2006-06-18
Pendraia - 09 July 2013 06:38 PM

Hi Kenneth,

I remember when this thread was set up and the links did all work at the time. I would suggest that it’s good practice that if you find a broken link on a thread like this to pm the OP so that they can fix it.

Ok.  I did that.  Thanks for your interest.

    -Ken

Profile
 
 
Posted: 10 July 2013 02:19 PM   [ Ignore ]   [ # 21 ]
Administrator
Avatar
RankRankRankRank
Total Posts:  17145
Joined  2003-10-09

Unfortunately If you PMed Blaine then you are unlikely to get a reply. He is no longer with DAZ 3D.

 Signature 

Chohole’s Space        NeilV’s Freebies and stuff        Winter Bryce Rendering Challenge        December Freebie Challenge
My DAZ 3D Gallery    11915

Profile
 
 
Posted: 10 July 2013 02:34 PM   [ Ignore ]   [ # 22 ]
Power Member
Avatar
RankRankRank
Total Posts:  2331
Joined  2005-09-05
Kenneth Evans - 10 July 2013 12:36 PM
Pendraia - 09 July 2013 06:38 PM

Hi Kenneth,

I remember when this thread was set up and the links did all work at the time. I would suggest that it’s good practice that if you find a broken link on a thread like this to pm the OP so that they can fix it.

Ok.  I did that.  Thanks for your interest.

    -Ken

No problem…thanks for taking the time to be proactive. You may want to check your pm’s though…; )

 Signature 

Shadermixer tutorials and recipes
My ShareCG Gallery
Shadermixer Documents

Profile
 
 
Posted: 10 July 2013 02:44 PM   [ Ignore ]   [ # 23 ]
Power Member
Avatar
RankRankRank
Total Posts:  2331
Joined  2005-09-05
chohole - 10 July 2013 02:19 PM

Unfortunately If you PMed Blaine then you are unlikely to get a reply. He is no longer with DAZ 3D.

Hi Cho,

I wasn’t aware that Blaine had left…who would be responsible for it now? There are some things that need adding to the Shader Mixer List also. So many people have now gone…: (

Would this be something the Community Volunteers are able to do or would it require someone who is part of the moderating team?

Do you or Richard have access?

It really does need to be fixed if it is going to remain a sticky.

Thanks

Pen

 Signature 

Shadermixer tutorials and recipes
My ShareCG Gallery
Shadermixer Documents

Profile
 
 
Posted: 10 July 2013 03:25 PM   [ Ignore ]   [ # 24 ]
Member
Avatar
Rank
Total Posts:  52
Joined  2006-06-18
Pendraia - 10 July 2013 02:34 PM

You may want to check your pm’s though…; )

I PM’ed DAZ_bfurner and copied you.  Apparently it doesn’t tell you that.

I see he is no longer at DAZ.  Thanks for following up.  Hopefully someone will take it over.

    -Ken

Profile
 
 
Posted: 10 July 2013 03:34 PM   [ Ignore ]   [ # 25 ]
Power Member
Avatar
RankRankRank
Total Posts:  2331
Joined  2005-09-05
Kenneth Evans - 10 July 2013 03:25 PM
Pendraia - 10 July 2013 02:34 PM

You may want to check your pm’s though…; )

I PM’ed DAZ_bfurner and copied you.  Apparently it doesn’t tell you that.

I see he is no longer at DAZ.  Thanks for following up.  Hopefully someone will take it over.

    -Ken

No problem…I really need to know who is doing the job now so I know who to pm over the Shader Mixer List. I was able to update it myself in the old forum as I was the OP but as it was reposted by someone else here I no longer have access and the list is missing many links in the original post.

 Signature 

Shadermixer tutorials and recipes
My ShareCG Gallery
Shadermixer Documents

Profile
 
 
Posted: 10 July 2013 03:59 PM   [ Ignore ]   [ # 26 ]
Administrator
Avatar
RankRankRankRank
Total Posts:  17145
Joined  2003-10-09

Where was it posted over here Pen.

Edit,  OK I found it.  Hmm difficult.

Best thing I can say is use the quote facility to copy the stuff into a new thread, and then we can replace the copied over one with one that is live.  Reserve some spare posts for yourself, so you have space to maintain it.

 Signature 

Chohole’s Space        NeilV’s Freebies and stuff        Winter Bryce Rendering Challenge        December Freebie Challenge
My DAZ 3D Gallery    11915

Profile
 
 
Posted: 10 July 2013 04:11 PM   [ Ignore ]   [ # 27 ]
Power Member
Avatar
RankRankRank
Total Posts:  2331
Joined  2005-09-05
chohole - 10 July 2013 03:59 PM

Where was it posted over here Pen.

In the DAZ Studio Forum under software. It’s a sticky. There are two new tutorials that I did recently that I posted links to and it would probably be good to check if any others have been posted that haven’t been added to the OP. If I know it’s going to be updated regularly there are probably more threads that could be linked to. I know that there was a good recipe for a png network from someone…not sure if it was posted in the thread but I think it was.

I don’t suppose that there is anyway to get back the ability to update the OP myself? I would prefer that but I doubt that it’s possible without me starting a new thread.

Thanks for looking at this.

Pen

 Signature 

Shadermixer tutorials and recipes
My ShareCG Gallery
Shadermixer Documents

Profile
 
 
Posted: 10 July 2013 04:14 PM   [ Ignore ]   [ # 28 ]
Power Member
Avatar
RankRankRank
Total Posts:  2331
Joined  2005-09-05
chohole - 10 July 2013 03:59 PM

Where was it posted over here Pen.

Edit,  OK I found it.  Hmm difficult.

Best thing I can say is use the quote facility to copy the stuff into a new thread, and then we can replace the copied over one with one that is live.  Reserve some spare posts for yourself, so you have space to maintain it.

Ok…not sure if you edited as I was posting or I didn’t stop to read it properly…lol

So it’s okay for me to restart it?

Cool…I’ll try and sort it out today sometime. I’m currently working on another project but would like to see it updated on a regular basis.

If you contacted RKane(is he still active) he might want to do the same with his thread.

Thanks Cho! Your a legend…: )

Pen

 Signature 

Shadermixer tutorials and recipes
My ShareCG Gallery
Shadermixer Documents

Profile
 
 
Posted: 10 July 2013 04:24 PM   [ Ignore ]   [ # 29 ]
Administrator
Avatar
RankRankRankRank
Total Posts:  17145
Joined  2003-10-09

No probs. Let us know when it is ready and we will remove the old one and sticky your one.

As I said if you reserve yourself some spare posts, by typing something in them it gives you room to expand at the top of the thread. Is a tip we use for all the lists in the Freezie.

 Signature 

Chohole’s Space        NeilV’s Freebies and stuff        Winter Bryce Rendering Challenge        December Freebie Challenge
My DAZ 3D Gallery    11915

Profile
 
 
Posted: 10 July 2013 04:30 PM   [ Ignore ]   [ # 30 ]
Power Member
Avatar
RankRankRank
Total Posts:  2331
Joined  2005-09-05
chohole - 10 July 2013 04:24 PM

No probs. Let us know when it is ready and we will remove the old one and sticky your one.

As I said if you reserve yourself some spare posts, by typing something in them it gives you room to expand at the top of the thread. Is a tip we use for all the lists in the Freezie.

Working on it now…; )

Thanks for the tip. I let you know once it’s done.

hugs

Pen(who is very excited about being able to update the list again)

 Signature 

Shadermixer tutorials and recipes
My ShareCG Gallery
Shadermixer Documents

Profile
 
 
   
2 of 3
2