It’s Friday, Friday! And you’ve gotta get down on Friday!
Didn’t sleep well last night, but still feeling mostly OK today. Neck is bothering me a lot so I’m considering coughing up cash to go for a nice massage (not the naughty kind!!). Going to be in the 80s today, wheeeeeee!
I’m glad I can sleep in tomorrow, I swear, I need to catch up on my snoozing! This old loach needs his rest..
Debug, debug, debug today. Quite a challenging problem to solve, guess that’s why I get the big bucks..
a soak in a hot tub or hot bath (with epsom salts) might help loosen the neck tension.
or something more aroma therapeutic?
converting configuration screengrabs from 24 T1 cards into an excel spreadsheet.
Sounds exciting, yes?
and the LIU cards and alert reports. i’m gonna make it pretty!
screen shots? the data can’t be retrieved programatically in a usable format?
i can only get the ascii text via a serial port, and i would have to wait for a tech to do it all for me - i’m not in the union can’t touch the pretties.
not so bad, I’m using OCR from adobe acrobat.
i’m making an access database and an entry form, actually it’s going to be faster to just type in the info. will need a verify data entry form, too. yep. job security, lol.
first i have to identify all the fields needed.
shouldn’t be that many.. but then its been a couple years since I had to configure a T1
oh, you’re familiar with the configuration speak?
if i show the fields list, would you critique? i’m almost complete, ... i think.
sure I can take a look at it..
Thanks
lessee. This is just for the LIU info
Route-24: label text site to site MUX
#00 RW - not sure what this means? | Not sure
LIU: string -2412-40
Transmit Options:label text
Frame Format: string
Line Code: string
Equalization: string - there’s an ‘ft’ here, unit of measure?
Clock Synch: string
Maintenance Options: label text
Loopback: boolean
Xmt test pattern: boolean
LIU Signal Generation: label text
Bit Byte Clock: string
Receive Code: string
Code to Dumb Unit: string
Trunk Processing Time: string
CircitID: string
-there’s a new column here, I can’t tell which label block these next 2 should be under? Transmit options? | yes can have internal or external clock syncing
Ext Clock: string
Clock Sync: string
LIU Card Data: label text
Product Rev: string
FW Rev: string
Serial Number: string
Issue Number: string
converting configuration screengrabs from 24 T1 cards into an excel spreadsheet.
Sounds exciting, yes?
and the LIU cards and alert reports. i’m gonna make it pretty!
screen shots? the data can’t be retrieved programatically in a usable format?
i can only get the ascii text via a serial port, and i would have to wait for a tech to do it all for me - i’m not in the union can’t touch the pretties.
not so bad, I’m using OCR from adobe acrobat.
i’m making an access database and an entry form, actually it’s going to be faster to just type in the info. will need a verify data entry form, too. yep. job security, lol.
first i have to identify all the fields needed.
shouldn’t be that many.. but then its been a couple years since I had to configure a T1
oh, you’re familiar with the configuration speak?
if i show the fields list, would you critique? i’m almost complete, ... i think.
sure I can take a look at it..
Thanks
lessee. This is just for the LIU info
Route-24: label text site to site MUX
#00 RW - not sure what this means?
LIU: string -2412-40
Transmit Options:label text
Frame Format: string
Line Code: string
Equalization: string - there’s an ‘ft’ here, unit of measure?
Clock Synch: string
Maintenance Options: label text
Loopback: boolean
Xmt test pattern: boolean
LIU Signal Generation: label text
Bit Byte Clock: string
Receive Code: string
Code to Dumb Unit: string
Trunk Processing Time: string
CircitID: string
-there’s a new column here, I can’t tell which label block these next 2 should be under? Transmit options?
Ext Clock: string
Clock Sync: string
LIU Card Data: label text
Product Rev: string
FW Rev: string
Serial Number: string
Issue Number: string
Options: label text
Mode of Operation: string
Receive Gain: string ‘dB’
Transmit Gain: string ‘dB’
Trunk Processing: string (a dropdown list? says IDLE, don’t know other options)
Receive Data/Code: string (dropdown?)
Loopback: boolean
2713 Loopback: boolean (enabled/disabled)
2713 Timeout: boolean (enabled/disabled)
Transmit A Bit: string
Circuit ID: string
Status: label text
says A on the next line. is that the status? assuming A means active. Status: boolean
RX: integer
TX: integer
2713 Detect: boolean
Mode: label text
Type: string
NORM ? -it just says NORM on a line by itself?
Lock: boolean
24 Channels. one to many. LIU to Channels
after this it gets confusing, doh
yeah it does get confusing, most are set and forget, and after the compnay I used to work for grew ginormously, the network engineers took over the wan/lan side of things, all I had to deal with were servers.
converting configuration screengrabs from 24 T1 cards into an excel spreadsheet.
Sounds exciting, yes?
and the LIU cards and alert reports. i’m gonna make it pretty!
screen shots? the data can’t be retrieved programatically in a usable format?
i can only get the ascii text via a serial port, and i would have to wait for a tech to do it all for me - i’m not in the union can’t touch the pretties.
not so bad, I’m using OCR from adobe acrobat.
i’m making an access database and an entry form, actually it’s going to be faster to just type in the info. will need a verify data entry form, too. yep. job security, lol.
first i have to identify all the fields needed.
shouldn’t be that many.. but then its been a couple years since I had to configure a T1
oh, you’re familiar with the configuration speak?
if i show the fields list, would you critique? i’m almost complete, ... i think.
sure I can take a look at it..
Thanks
lessee. This is just for the LIU info
Route-24: label text site to site MUX
#00 RW - not sure what this means?
LIU: string -2412-40
Transmit Options:label text
Frame Format: string
Line Code: string
Equalization: string - there’s an ‘ft’ here, unit of measure?
Clock Synch: string
Maintenance Options: label text
Loopback: boolean
Xmt test pattern: boolean
LIU Signal Generation: label text
Bit Byte Clock: string
Receive Code: string
Code to Dumb Unit: string
Trunk Processing Time: string
CircitID: string
-there’s a new column here, I can’t tell which label block these next 2 should be under? Transmit options?
Ext Clock: string
Clock Sync: string
LIU Card Data: label text
Product Rev: string
FW Rev: string
Serial Number: string
Issue Number: string
Options: label text
Mode of Operation: string
Receive Gain: string ‘dB’
Transmit Gain: string ‘dB’
Trunk Processing: string (a dropdown list? says IDLE, don’t know other options)
Receive Data/Code: string (dropdown?)
Loopback: boolean
2713 Loopback: boolean (enabled/disabled)
2713 Timeout: boolean (enabled/disabled)
Transmit A Bit: string
Circuit ID: string
Status: label text
says A on the next line. is that the status? assuming A means active. Status: boolean
RX: integer
TX: integer
2713 Detect: boolean
Mode: label text
Type: string
NORM ? -it just says NORM on a line by itself?
Lock: boolean
24 Channels. one to many. LIU to Channels
after this it gets confusing, doh
yeah it does get confusing, most are set and forget, and after the compnay I used to work for grew ginormously, the network engineers took over the wan/lan side of things, all I had to deal with were servers.
so there’s a 4wire to 4wire. and a 4wire to 2wire. i hope this clicks in my brain before the espresso wears off. i haven’t felt this awake all week.
well like I said its been a few years, and I’m a hands on visual type person. labels and text in a forum doesn’t quite put it in context for my brain to process. and based on what google has spit out, there’s not much “user” configuration of the LIU to do.
It’s Friday, Friday! And you’ve gotta get down on Friday!
Didn’t sleep well last night, but still feeling mostly OK today. Neck is bothering me a lot so I’m considering coughing up cash to go for a nice massage (not the naughty kind!!). Going to be in the 80s today, wheeeeeee!
I’m glad I can sleep in tomorrow, I swear, I need to catch up on my snoozing! This old loach needs his rest..
Debug, debug, debug today. Quite a challenging problem to solve, guess that’s why I get the big bucks..
a soak in a hot tub or hot bath (with epsom salts) might help loosen the neck tension.
or something more aroma therapeutic?
That sounds reasonable too, as long as I propped my hurt foot up out of the hot water.
well like I said its been a few years, and I’m a hands on visual type person. labels and text in a forum doesn’t quite put it in context for my brain to process. and based on what google has spit out, there’s not much “user” configuration of the LIU to do.
oh, i didn’t mean to put you out. I can reference a few manuals or bother a tech.
Thanks though.
It’s always a pleasure to see your cute avatar. soooo kyoooot.
well like I said its been a few years, and I’m a hands on visual type person. labels and text in a forum doesn’t quite put it in context for my brain to process. and based on what google has spit out, there’s not much “user” configuration of the LIU to do.
oh, i didn’t mean to put you out. I can reference a few manuals or bother a tech.
Thanks though.
It’s always a pleasure to see your cute avatar. soooo kyoooot.
oh its ok, internal lan stuff I know fairly well (routers and switches) as well as ethernet card config.. but basicaly I’m a Server Admin person, (windows, unix. linux doesn’t matter I can manage them) .
It’s Friday, Friday! And you’ve gotta get down on Friday!
Didn’t sleep well last night, but still feeling mostly OK today. Neck is bothering me a lot so I’m considering coughing up cash to go for a nice massage (not the naughty kind!!). Going to be in the 80s today, wheeeeeee!
I’m glad I can sleep in tomorrow, I swear, I need to catch up on my snoozing! This old loach needs his rest..
Debug, debug, debug today. Quite a challenging problem to solve, guess that’s why I get the big bucks..
a soak in a hot tub or hot bath (with epsom salts) might help loosen the neck tension.
or something more aroma therapeutic?
That sounds reasonable too, as long as I propped my hurt foot up out of the hot water.
you can’t wash your foot? what about that iodine stuff they use in hospitals?
worries about infection.
i understand the contract employee/no insurance/diabetic dilemma, haz the same problem.
omg, i think i finally found the Laurell K Hamilton my friend was talking about. She didn’t find a “book” on editing that started her career, she went to an intensive workshop on editing. grr grrr lol. http://www.sfsite.com/11a/lh187.htm
It’s Friday, Friday! And you’ve gotta get down on Friday!
Didn’t sleep well last night, but still feeling mostly OK today. Neck is bothering me a lot so I’m considering coughing up cash to go for a nice massage (not the naughty kind!!). Going to be in the 80s today, wheeeeeee!
I’m glad I can sleep in tomorrow, I swear, I need to catch up on my snoozing! This old loach needs his rest..
Debug, debug, debug today. Quite a challenging problem to solve, guess that’s why I get the big bucks..
a soak in a hot tub or hot bath (with epsom salts) might help loosen the neck tension.
or something more aroma therapeutic?
That sounds reasonable too, as long as I propped my hurt foot up out of the hot water.
you can’t wash your foot? what about that iodine stuff they use in hospitals?
worries about infection.
i understand the contract employee/no insurance/diabetic dilemma, haz the same problem.
Fortunately the skin isn’t broken on the foot, but because of the swelling I need to keep it iced down when at home, so putting a swollen foot into a hot tub wouldn’t be too good. That’s why I figured a nice massage, focus on the neck and shoulders.
Yeah - no insurance+diabetes = suckage. At least most of my supplies are inexpensive. I just need to stay healthy enough to work, so I can pay off bills and save some for the next stupid emergency.
keep the espresso coming, lol. gotta do some stuff and get it done!!
i ordered that self-editing book, worse comes to worse i’m down the 11 dollars. and taking to heart some of the tips from the LKH interview.
And ordered Brave. Saw KK’s princess wip and made me want to see the movie.
d/l the Realpaint demo to give it a serious test drive.
when i get home also gonna d/l the Hexagon and try out it’s dxf capabilities. i’ve been wanting to design a font and turn it into props.
no utube, tvtropes this weekend, sidetracks me into wasting a whole weekend. keeps me up passed my bedtime and then too tired to do anything the next day. serious!
picking up a visagiftcard on the way home. 3 weekends of mm left.
phew, feeling lil dizzy. such a thing as too much caffeine?
some serious caching issues today. every other post turns me over to the broken login page.
Cold chicken fajita taco for breakfast and a diet Coke. Digestive system hating on me for something I ate yesterday. Didn’t get a lot of writing done last night. Foot faintly achy. Runny nose due to allergies. Neck sore from sleeping funny, what little sleep I managed to get last night. Don’t feel like working, wish I were back in my little writers cave, asleep. I’m bored, tired, and filled to the brim with a listless ennui.
Mehhhhhhhhhhhhhhhhhhhhhhhhhh.
But I did get to use the term “listless ennui” in a sentence!
keep the espresso coming, lol. gotta do some stuff and get it done!!
i ordered that self-editing book, worse comes to worse i’m down the 11 dollars. and taking to heart some of the tips from the LKH interview.
And ordered Brave. Saw KK’s princess wip and made me want to see the movie.
d/l the Realpaint demo to give it a serious test drive.
when i get home also gonna d/l the Hexagon and try out it’s dxf capabilities. i’ve been wanting to design a font and turn it into props.
no utube, tvtropes this weekend, sidetracks me into wasting a whole weekend. keeps me up passed my bedtime and then too tired to do anything the next day. serious!
picking up a visagiftcard on the way home. 3 weekends of mm left.
phew, feeling lil dizzy. such a thing as too much caffeine?
some serious caching issues today. every other post turns me over to the broken login page.
Sounds like a bizzy buzzy dizzy day!
Too much caffeine will definitely give you that bzzzzzzzzzzzz feeling.. ugh. But coffee is a good idea!
Brave sounds like fun, maybe I’ll rent it this weekend.
And you’ve gotta get down on Friday!
