Digital Art Zone

 
   
8 of 100
8
Show Us Your Bryce Renders! Part 3
Posted: 01 January 2013 02:32 PM   [ Ignore ]   [ # 106 ]
New Member
Avatar
Total Posts:  8
Joined  2012-11-22

dont look at the texture on the floor and table (there just an example) but this is the model I posted for anyone to download, just letting people see what can be done to it with lights etc…

Image Attachments
stairs_in_room.jpg_2_.jpg_3_.jpg
Profile
 
 
Posted: 01 January 2013 03:24 PM   [ Ignore ]   [ # 107 ]
Active Member
Avatar
RankRank
Total Posts:  620
Joined  2010-02-18

scott.rafferty11…looking good. Referring back to your boats’ work, the placement might just be a simple click on the small ‘down-arrow’ (below the letter M) that you’ll see when you highlight the boat’s mesh. Clicking on the down-arrow will ‘ground’ the boats down onto the water plane, as at the moment they may simply lie just above it.

Horo…like the halo around the girl – it softens her and makes her stand out, too. Perhaps applying the same to the grazers might suit, also; take off the sharp-ish look to them? But I don’t know, as you’re probably aiming for a certain type of final image.

Gabriel…looks very good. Tried your technique and it’s possible to produce some wonderful works simply by, say, changing the material of the sphere in ‘lieu’ (see how I threw in that French word there? smile ) to changing the sky. I think I’ll title the bottom image in your honour as ‘Fiery Planet - Moreau’ wink Btw..no post work here either.

Edit: Second work (top) is also using Gabriel’s technique, Title of this is “Event Horizon”.

Jay

Image Attachments
EventHorizon.jpgFieryPlanetMoreau.jpg
Profile
 
 
Posted: 01 January 2013 04:39 PM   [ Ignore ]   [ # 108 ]
Power Member
Avatar
RankRankRank
Total Posts:  1308
Joined  2006-08-19

ok this is a neat trick the refraction sphere on the camera.. I like need to incorporate this into my abstract renders.

Image Attachments
sun2.jpg
 Signature 

http://rarethdigitalmusings.blogspot.com/

http://rareth1966.deviantart.com/gallery/

Profile
 
 
Posted: 01 January 2013 05:52 PM   [ Ignore ]   [ # 109 ]
Member
Avatar
Rank
Total Posts:  244
Joined  2012-10-14
Kine_magiK - 01 January 2013 06:34 AM
eireann.sg - 01 January 2013 04:59 AM
Kine_magiK - 01 January 2013 04:56 AM

Well another year is over and a new one begun.

Here is one 2-week render done toward the end 2012 [none of you have seen before] i will go out with and wish you all the best and many happy Bryce experiences during THIS new year.

very nice pic, but the message looks photoshopped to me smile

Of course the message is superimposed on the render and i made this as obvious as possible.

Have i done anything wrong?

Kind regards from Australia.

Peter

No, you didnt do anything wrongI was just kidding.
Dont you people have any sense humor? LOL
And I already thought Singapore was bad when it comes to understanding jokes. They even wrote about it in foreign news papers.
Just relax, nobody is doing anything to you smile

Profile
 
 
Posted: 01 January 2013 05:54 PM   [ Ignore ]   [ # 110 ]
Member
Avatar
Rank
Total Posts:  244
Joined  2012-10-14
chohole - 01 January 2013 06:45 AM

I also don’t understand the comment.  I frequently use Photoshop in conjunction with Bryce renders, as I am sure many do, as in the card I posted earlier in the thread.

It was just kidding. Do we always have to understand it all?

Profile
 
 
Posted: 01 January 2013 05:57 PM   [ Ignore ]   [ # 111 ]
Member
Avatar
Rank
Total Posts:  244
Joined  2012-10-14
Kine_magiK - 01 January 2013 07:29 AM
chohole - 01 January 2013 06:45 AM

I also don’t understand the comment.  I frequently use Photoshop in conjunction with Bryce renders, as I am sure many do, as in the card I posted earlier in the thread.

I also don’t understand it either, BUT there have been many comments of like kind from that poster rendered in subtle expression designed to induce negativity for some time especially in respect to my imperfect Instancing Lab Tutorial [ which many people here, more worthy than i, have defended bravely ]. But it is not something i wish to worry about.

We [ actually YOU ] have a wonderful community of people who are so kind and talented. I am moved very much by that. And we have so many great artists who could run rings around me BUT who treat me with respect. Thus i absolutely adore them.

I don’t worry about comments some people make - perhaps innocently or perhaps with unkind intent. Lets keep this forum really loving in 2013.

I will help you as much as i can by not reacting or overreacting to anything negative that comes my way.

Have a nice 2013.

Kind regards from Australia

Peter

P.S. is your name Pam?

I dont know why you keep picking on my comment about that instancing lab tutorial.
Its just something “I” can not handle well because its a blob of text plus a blob of images. Just for “ME” (and maybe for 2 or 3 others)  it is difficult to understand in this form. Can you chill now instead of freaking out over such comments?
IF I WASNT just an “anonymous person”, “just another forum’s user” to you, if you would know me in person you would have judged my comment differently, then your concerns would not even have come up.

Profile
 
 
Posted: 01 January 2013 07:28 PM   [ Ignore ]   [ # 112 ]
New Member
Total Posts:  20
Joined  2012-04-24

Thank you for the nice comments.
@ GussNemo: You are indeed correct. There is something wrong with the dragon in my previous post. His pose and positioning are at odds with the ideal expressed in the title of the image. That’s what I get for not sticking to the original image idea I had when first I posed him.
Here then is a corrected version of the image.

Image Attachments
11dragnn2fixed.png
Profile
 
 
Posted: 01 January 2013 08:35 PM   [ Ignore ]   [ # 113 ]
Power Member
Avatar
RankRankRank
Total Posts:  1388
Joined  2011-09-25

@Pam:  Father Time looks really nice.  Now the plate is another story.  While looking at it I felt some parts were 3D and others 2D.  That’s a awfully nice plate you created.

@David:  Love the additional lighthouse images.

@Horo: Both of those images look great.  I really like the additional things in the second one.  Nicely done.

@Rareth:  I take it “on the camera” means surrounding the camera?  Or right up against the camera, directly in front?

@mx:  Now she looks to be defending the dragon, which is neat.  And fits the scene much better.  Nice work.

 Signature 

If you constantly look backward, it’s guaranteed you’ll run into something on your forward journey.
My Gallery Page: GussNemo’s Efforts

Profile
 
 
Posted: 01 January 2013 09:20 PM   [ Ignore ]   [ # 114 ]
Power Member
Avatar
RankRankRank
Total Posts:  1308
Joined  2006-08-19
GussNemo - 01 January 2013 08:35 PM

@Pam:  Father Time looks really nice.  Now the plate is another story.  While looking at it I felt some parts were 3D and others 2D.  That’s a awfully nice plate you created.

@David:  Love the additional lighthouse images.

@Horo: Both of those images look great.  I really like the additional things in the second one.  Nicely done.

@Rareth:  I take it “on the camera” means surrounding the camera?  Or right up against the camera, directly in front?

@mx:  Now she looks to be defending the dragon, which is neat.  And fits the scene much better.  Nice work.

Gabriel gave a quick tutorial with pictures on how to do it on page 5, you basically take a transparent sphere with a refraction of 5 and align it with the camera, then set the camera FOV to 180,

 Signature 

http://rarethdigitalmusings.blogspot.com/

http://rareth1966.deviantart.com/gallery/

Profile
 
 
Posted: 01 January 2013 11:30 PM   [ Ignore ]   [ # 115 ]
Power Member
Avatar
RankRankRank
Total Posts:  1388
Joined  2011-09-25

@Rareth:  Thanks.  I have the darnedest time putting 2 and 2 together to get 4. grin

 Signature 

If you constantly look backward, it’s guaranteed you’ll run into something on your forward journey.
My Gallery Page: GussNemo’s Efforts

Profile
 
 
Posted: 01 January 2013 11:43 PM   [ Ignore ]   [ # 116 ]
Member
Avatar
Rank
Total Posts:  142
Joined  2008-03-28
eireann.sg - 01 January 2013 05:57 PM
Kine_magiK - 01 January 2013 07:29 AM
chohole - 01 January 2013 06:45 AM

I also don’t understand the comment.  I frequently use Photoshop in conjunction with Bryce renders, as I am sure many do, as in the card I posted earlier in the thread.

I also don’t understand it either, BUT there have been many comments of like kind from that poster rendered in subtle expression designed to induce negativity for some time especially in respect to my imperfect Instancing Lab Tutorial [ which many people here, more worthy than i, have defended bravely ]. But it is not something i wish to worry about.

We [ actually YOU ] have a wonderful community of people who are so kind and talented. I am moved very much by that. And we have so many great artists who could run rings around me BUT who treat me with respect. Thus i absolutely adore them.

I don’t worry about comments some people make - perhaps innocently or perhaps with unkind intent. Lets keep this forum really loving in 2013.

I will help you as much as i can by not reacting or overreacting to anything negative that comes my way.

Have a nice 2013.

Kind regards from Australia

Peter

P.S. is your name Pam?

I dont know why you keep picking on my comment about that instancing lab tutorial.
Its just something “I” can not handle well because its a blob of text plus a blob of images. Just for “ME” (and maybe for 2 or 3 others)  it is difficult to understand in this form. Can you chill now instead of freaking out over such comments?
IF I WASNT just an “anonymous person”, “just another forum’s user” to you, if you would know me in person you would have judged my comment differently, then your concerns would not even have come up.

I am sorry if i have offended you. But i have not [will not] judged you negatively! Your comments abut the instancing lab are perfectly valid and i have no problem with that [i have even acknowledged those shortcomings myself before you even commented].

To me you are NOT just another “anonymous person”. i respect you as a real individual at the other end of the cyber monster we now must use. I know better than most, what it feels like to be misjudged on the internet!

Be at peace and enjoy participating on this forum.

I am now embarking on a new project. I am creating Bryce-ONLY fonts for my use. This means no Illustrator, Photoshop or any font creation program. That means when i want to sign my work or put text on tutorial images it will be 100% Bryce work. Also my Fonts will be roalty free because i created them.

I have always wanted to do that.

Kind regards from Australia.

Peter

Profile
 
 
Posted: 01 January 2013 11:54 PM   [ Ignore ]   [ # 117 ]
Member
Avatar
Rank
Total Posts:  244
Joined  2012-10-14
Kine_magiK - 01 January 2013 11:43 PM
eireann.sg - 01 January 2013 05:57 PM
Kine_magiK - 01 January 2013 07:29 AM
chohole - 01 January 2013 06:45 AM

I also don’t understand the comment.  I frequently use Photoshop in conjunction with Bryce renders, as I am sure many do, as in the card I posted earlier in the thread.

I also don’t understand it either, BUT there have been many comments of like kind from that poster rendered in subtle expression designed to induce negativity for some time especially in respect to my imperfect Instancing Lab Tutorial [ which many people here, more worthy than i, have defended bravely ]. But it is not something i wish to worry about.

We [ actually YOU ] have a wonderful community of people who are so kind and talented. I am moved very much by that. And we have so many great artists who could run rings around me BUT who treat me with respect. Thus i absolutely adore them.

I don’t worry about comments some people make - perhaps innocently or perhaps with unkind intent. Lets keep this forum really loving in 2013.

I will help you as much as i can by not reacting or overreacting to anything negative that comes my way.

Have a nice 2013.

Kind regards from Australia

Peter

P.S. is your name Pam?

I dont know why you keep picking on my comment about that instancing lab tutorial.
Its just something “I” can not handle well because its a blob of text plus a blob of images. Just for “ME” (and maybe for 2 or 3 others)  it is difficult to understand in this form. Can you chill now instead of freaking out over such comments?
IF I WASNT just an “anonymous person”, “just another forum’s user” to you, if you would know me in person you would have judged my comment differently, then your concerns would not even have come up.

I am sorry if i have offended you. But i have not [will not] judged you negatively! Your comments abut the instancing lab are perfectly valid and i have no problem with that [i have even acknowledged those shortcomings myself before you even commented].

To me you are NOT just another “anonymous person”. i respect you as a real individual at the other end of the cyber monster we now must use. I know better than most, what it feels like to be misjudged on the internet!

Be at peace and enjoy participating on this forum.

I am now embarking on a new project. I am creating Bryce-ONLY fonts for my use. This means no Illustrator, Photoshop or any font creation program. That means when i want to sign my work or put text on tutorial images it will be 100% Bryce work. Also my Fonts will be roalty free because i created them.

I have always wanted to do that.

Kind regards from Australia.

Peter

No worries mate,
I am happy we have settled that misunderstanding now. BTW, I sent you a short PM. Sorry that I think differently. I also cant handle the Maya, Daz Studio, Maya, Lightwave, Hexagon, Bender interfaces. I think they are all rubbish, but its just me and a few others. I just have a different way of thinking and some of my comments are rather direct or blunt without intending to offend anyone. Maybe I am suffering from a slight Aspergers. Thats why I have probably only 3 or 4 people I sometimes visit. For the rest: I go out a lot (not to the city or partying but just on a walkabout), I need a lot of exercise.

and no, my name is not Pam and it was never Pam. According to my Birth Cert. its Éireann, unless my mom made a mistake when registering my name after birth smile

How would you make bryce letters without resorting to some kind of images or tertiary program (Wings, Hexagon etc)?
I am just curious, and yes, I do a lot of Photoshopping myself. The attached image is heavily Photoshopped smile wink

Image Attachments
K2323729_F_(950x568).jpg
Profile
 
 
Posted: 02 January 2013 02:02 AM   [ Ignore ]   [ # 118 ]
New Member
Avatar
Total Posts:  23
Joined  2008-01-02
Jamahoney - 01 January 2013 03:24 PM

Gabriel…looks very good. Tried your technique and it’s possible to produce some wonderful works simply by, say, changing the material of the sphere in ‘lieu’ (see how I threw in that French word there? smile ) to changing the sky. I think I’ll title the bottom image in your honour as ‘Fiery Planet - Moreau’ wink Btw..no post work here either.

Edit: Second work (top) is also using Gabriel’s technique, Title of this is “Event Horizon”.
Jay

Merci pour ce grand honeur… It’s just a simple technique to follow the fashion of “small planets”. Nothing new… but it’s fun !

You know that the French have always an inordinate pride… It is said in France that Bryce was created by the French (Eric Wenger) ... and forget Ken Musgrave, pupil of Benoit Mandelbrot ... wink

Profile
 
 
Posted: 02 January 2013 02:07 AM   [ Ignore ]   [ # 119 ]
Power Member
Avatar
RankRankRank
Total Posts:  1550
Joined  2007-12-10
eireann.sg - 01 January 2013 11:54 PM

How would you make bryce letters without resorting to some kind of images or tertiary program (Wings, Hexagon etc)?

Letters are just geometry, made from curves and lines.

Easy as ABC. cheese

Image Attachments
ABC.jpg
 Signature 

I’ve got nothing of my own to promote, no models, no tutorials, no website, nothin’, nada, nill, nowt.

Profile
 
 
Posted: 02 January 2013 02:27 AM   [ Ignore ]   [ # 120 ]
Addict
Avatar
RankRankRankRank
Total Posts:  3384
Joined  2004-10-01
Rareth - 01 January 2013 04:39 PM

ok this is a neat trick the refraction sphere on the camera.. I like need to incorporate this into my abstract renders.

This looks a bit like the surface of the sun.

 Signature 

**  [ Stuff by David Brinnen and myself**  [ My DAZ 3D Gallery**  [ My Website**  OPC 4565 **

Profile
 
 
   
8 of 100
8