Digital Art Zone

 
     
Genesis Hyper Suit (Out Now)(COMMERICAL)
Posted: 17 November 2012 07:34 AM   [ Ignore ]
Power Member
Avatar
RankRankRank
Total Posts:  1282
Joined  2005-02-25

Ok as Kevin said the 50% off is for today only so grab it now if you want to save.


This is the next Sci-Fi set from Midnight_stories. The “Genesis Hyper Suit” is a super sleek suit, with boots, gloves, helmet, bio mask and gun. There is thirteen different material presets for the suit and all it’s accessories. It has support of eighteen different figure shapes. I’ve also created Preloaded characters for V4, V5, M4, M5 and Freak4 figure shapes.

The gun comes with ten morphs to help customize to your need, plus several gun presets and hand grips to help with fitting different figures. There’s five different character pose sets with the gun, specifically to suit V5 and M4.

A great deal of time has been spent on getting this poser compatible, all DAZ Studio mat presets have been converted into poser materials and not the DSON format. A great advantage of the DSON format is that it allows the poser user to load the character presets the same as from DAZ Studio, so there is full support for all the poses. I have also included a gun prop that has the high resolution mesh, plus fits for V4, V5, M4, M5 and Freak4 genesis morphs. This is a must for any serious Sci-Fi enthusiast.

Title edited to remove %

Image Attachments
F-Promo.jpgF-Promo0.jpgF-Promo3.jpgF-Promo1.jpg
 Signature 

The Mind on the other side!
http://www.daz3d.com/shop/midnight_stories/

 

Profile
 
 
Posted: 18 November 2012 09:17 AM   [ Ignore ]   [ # 1 ]
Power Member
Avatar
RankRankRank
Total Posts:  1282
Joined  2005-02-25

Here’s a very short demo of the gun morphs. Hope you’re enjoying the suit!
http://www.youtube.com/watch?v=-MHpVt0Pbkc
Thanks Midnight

 Signature 

The Mind on the other side!
http://www.daz3d.com/shop/midnight_stories/

 

Profile
 
 
Posted: 27 November 2012 11:23 AM   [ Ignore ]   [ # 2 ]
New Member
Avatar
Total Posts:  23
Joined  2003-10-09

I just bought the genesis hyper suit and installed the dson version for Poser 2012. When I add the gun to the scene I get a message looking for the Hyper-Gun.obj. I was under the impression that the gun was included!

Okay….I found that it was present when the! Preloaded version was used, but not when you try to load the prop seperately!

Profile
 
 
Posted: 27 November 2012 01:32 PM   [ Ignore ]   [ # 3 ]
Power Member
Avatar
RankRankRank
Total Posts:  1100
Joined  2010-09-19

I love that it’s got a proper boot shape to the feet - gives more of a protected look to it…

...not to mention dead handy for creating a more believable combat scene - kicking in doors, kicking in aliens etc. needs a bit of weight behind the foot, the “sock” shape of many other sci-fi suits look a bit too vulnerable (for my tastes at least)

 Signature 

My deviantART page
My ShareCG freebies
Some of my music

Profile
 
 
Posted: 27 November 2012 03:41 PM   [ Ignore ]   [ # 4 ]
Member
Avatar
Rank
Total Posts:  245
Joined  2003-10-09

Say, what’s that creature in the background of the first image in the first post?

Is it a preview of a thing from another world? A preview of things to come? A preview of some wicked thing that will come this way?

Profile
 
 
Posted: 27 November 2012 04:52 PM   [ Ignore ]   [ # 5 ]
Power Member
Avatar
RankRankRank
Total Posts:  1282
Joined  2005-02-25
SmallFry - 27 November 2012 03:41 PM

Say, what’s that creature in the background of the first image in the first post?

Is it a preview of a thing from another world? A preview of things to come? A preview of some wicked thing that will come this way?

Well I have named him Spine-Eater he in the Que for things to finish, I’m trying to match the stonemason Lava and Alpine planet sets, and yes it is based on the Hydralisk.

Image Attachments
AAA-SP.jpg
 Signature 

The Mind on the other side!
http://www.daz3d.com/shop/midnight_stories/

 

Profile
 
 
Posted: 27 November 2012 04:55 PM   [ Ignore ]   [ # 6 ]
Power Member
Avatar
RankRankRank
Total Posts:  1282
Joined  2005-02-25

Here’s a short look at the early stages
http://www.youtube.com/watch?v=0IOiREK_lHk

 Signature 

The Mind on the other side!
http://www.daz3d.com/shop/midnight_stories/

 

Profile
 
 
Posted: 24 September 2013 02:02 PM   [ Ignore ]   [ # 7 ]
Member
Avatar
Rank
Total Posts:  156
Joined  2003-10-09
midnight_stories - 27 November 2012 04:52 PM
SmallFry - 27 November 2012 03:41 PM

Say, what’s that creature in the background of the first image in the first post?

Is it a preview of a thing from another world? A preview of things to come? A preview of some wicked thing that will come this way?

Well I have named him Spine-Eater he in the Que for things to finish, I’m trying to match the stonemason Lava and Alpine planet sets, and yes it is based on the Hydralisk.

Reminds me of the Tyranids from Warhammer 40k.

Profile
 
 
Posted: 24 September 2013 07:17 PM   [ Ignore ]   [ # 8 ]
Active Member
RankRank
Total Posts:  773
Joined  2005-12-12
midnight_stories - 27 November 2012 04:52 PM
SmallFry - 27 November 2012 03:41 PM

Say, what’s that creature in the background of the first image in the first post?

Is it a preview of a thing from another world? A preview of things to come? A preview of some wicked thing that will come this way?

Well I have named him Spine-Eater he in the Que for things to finish, I’m trying to match the stonemason Lava and Alpine planet sets, and yes it is based on the Hydralisk.

Given that I have the same feelings towards Hydralisks that other people seem to have towards puppy dogs I was very exited about this figure. Now, this thread is pretty old and we haven’t heard a lot more about this project, sooooo, if I may inquire,...has it been cancelled? Or is it just taking a while?

Profile
 
 
Posted: 24 September 2013 07:28 PM   [ Ignore ]   [ # 9 ]
Power Member
Avatar
RankRankRank
Total Posts:  1282
Joined  2005-02-25

Guys I pulled it in the end due to copyright it was just too close the the games character rather than some big law suit I thought it was better to stay away from it. It was a hard lesson learned !

 Signature 

The Mind on the other side!
http://www.daz3d.com/shop/midnight_stories/

 

Profile
 
 
Posted: 24 September 2013 10:54 PM   [ Ignore ]   [ # 10 ]
Member
Avatar
Rank
Total Posts:  156
Joined  2003-10-09
midnight_stories - 24 September 2013 07:28 PM

Guys I pulled it in the end due to copyright it was just too close the the games character rather than some big law suit I thought it was better to stay away from it. It was a hard lesson learned !

Seriously, it’s IDENTICAL to the Tyranids from Warhammer 40k, if they try to sue you, Games Workshop will sue them.  There are a MULTITUDE of different companies using a worm with that carapace on it. Heck add two eye stalks that can be made invisible their’s doesn’t have eye stalks so that’s different. raspberry

Profile
 
 
Posted: 24 September 2013 10:59 PM   [ Ignore ]   [ # 11 ]
Member
Avatar
Rank
Total Posts:  156
Joined  2003-10-09

Tyranids, first introduced by Games Workshop in 1991 (almost a decade before StarCraft).  When I saw your model, I was salivating at the thought of USING IT AS a Tyranid.  Considering half of Sixus1’s line up at RDNA is the spitting image of Games Workshops’s Goblin and Orc armies, and how many other people have copied GW’s Tyranids…..

Image Attachments
11470_md-Carnifex,_Magnet,_Tyranids,_Warhammer_40,000.jpgTyranid_Trygon.jpg
Profile
 
 
Posted: 24 September 2013 11:25 PM   [ Ignore ]   [ # 12 ]
Administrator
Avatar
RankRankRankRank
Total Posts:  16477
Joined  2009-01-22

I have LOVED the Spine Eater from the First image I ever saw of it. I’m bummed that things stopped the development of the figure.

 Signature 

Exile, Drows Walk: A Tale of Jaderail starts here. Free pulp fiction at its Fantasy best, Updated 2/3/14.
Proud Member of the Bald Wizards Club My stuff at DeviantArt

Profile
 
 
Posted: 25 September 2013 12:09 AM   [ Ignore ]   [ # 13 ]
Power Member
Avatar
RankRankRank
Total Posts:  1282
Joined  2005-02-25

Well it did get finished every polygon on it is mine. The only way I would put it up is by going directly to the company. The turbo-squid model I used as reference stopped selling it and it’s up there for free now, so someone must have said something for them.

 Signature 

The Mind on the other side!
http://www.daz3d.com/shop/midnight_stories/

 

Profile
 
 
Posted: 25 September 2013 07:37 AM   [ Ignore ]   [ # 14 ]
Member
Avatar
Rank
Total Posts:  156
Joined  2003-10-09

I know a with other models that were obviously copyrighted, the creators have made them freebies, that way they weren’t profiting from them.  Maybe you could make an add on with the textures that you could sell and make the model a freebie so you’d still get compensated but be able to share the model.

AND JUST BECAUSE someone might have said something to TurboSquid doesn’t mean squat. People sued McDonalds because it made them fat.  StarCraft/Blizzard has nothing they can sue you for as they blatantly stole the idea and model with coloring from someone else.

Or maybe sell the various parts so that they can be parented to Genesis and we made some seriously wicked stuff kinda of like the Giegeralien.  I was so hoping you’d make a quad to battle against the BEO Quad

ADMISSION:  I’m racking my brain do come up with a way to get my hands on that extremely wicked model.

Profile
 
 
Posted: 25 September 2013 07:48 AM   [ Ignore ]   [ # 15 ]
Active Member
RankRank
Total Posts:  773
Joined  2005-12-12

I kinda figured it was something like that :D And I completely understand your reasons, no way in hell I would risk a lawsuit with Blizzard if I was in your place.

It is a tad depressing though, as GhengisFarb mentioned, that Blizzard on the other hand is getting away so easily, given the massive amount of ‘inspiration’ they obviously got from GamesWorkshop.

Profile