Digital Art Zone

I took the JJ freighter, Ptolmey or whatever, and then I simply switched off the opacity of the ugly/silly bits (no offense to Madman, I’m just offending JJ himself) and made the blue glow red.  I then put one of Starkiller’s dishes on the front.  All done on Daz3.

I really think someone outta make a TMP/TNG/JJ parts kit, akin to Starkiller’s TOS kits, so on can play around with those areas of vessels and make their own dream ship, as it were.

I might use the one I posted for my comics, once I have everything I need.  The comics might not start until next year, though.

mdbruffy - 18 December 2012 08:07 PM

Explain this one: I moved the zip to another computer that had winzip on it and that copy of the program opened the zip without any problem.

Winzip sucks!

Sorry, not a Winzip fan.  Much prefer Winrar myself.

Mattymanx - 18 December 2012 09:31 PM

mdbruffy - 18 December 2012 08:07 PM

Explain this one: I moved the zip to another computer that had winzip on it and that copy of the program opened the zip without any problem.

Winzip sucks!

Sorry, not a Winzip fan.  Much prefer Winrar myself.

I’ve used them both at various times. It just happens that right now, I don’t have a copy of Winrar.

TheCastellan - 18 December 2012 09:19 PM

I really think someone outta make a TMP/TNG/JJ parts kit, akin to Starkiller’s TOS kits, so on can play around with those areas of vessels and make their own dream ship, as it were.

That is what I have been doing with David Metlesits’ ships.  I have been disassembling all if his ships and I have a large selection of parts.  Multiple primary hulls, secondary saucers, engines, for both Federation and Klingon ships.

Testing out a TNG-Mirror Universe Agonizer booth room.

I used the TOS Agonizer booth, the Voyager computer console, and one of the Vanishing Point conference room chairs.

and the wall mount is from a converted hallway set.

And had to include a picture of Empress Beverly Howard.

ssgbryan - 18 December 2012 10:42 PM

TheCastellan - 18 December 2012 09:19 PM

I really think someone outta make a TMP/TNG/JJ parts kit, akin to Starkiller’s TOS kits, so on can play around with those areas of vessels and make their own dream ship, as it were.

That is what I have been doing with David Metlesits’ ships.  I have been disassembling all if his ships and I have a large selection of parts.  Multiple primary hulls, secondary saucers, engines, for both Federation and Klingon ships.

GIMMIE GIMMIE GIMMIE!!!!!! :3

TheCastellan - 19 December 2012 12:18 AM

ssgbryan - 18 December 2012 10:42 PM

TheCastellan - 18 December 2012 09:19 PM

I really think someone outta make a TMP/TNG/JJ parts kit, akin to Starkiller’s TOS kits, so on can play around with those areas of vessels and make their own dream ship, as it were.

That is what I have been doing with David Metlesits’ ships.  I have been disassembling all if his ships and I have a large selection of parts.  Multiple primary hulls, secondary saucers, engines, for both Federation and Klingon ships.

GIMMIE GIMMIE GIMMIE!!!!!! :3

They aren’t ready for prime-time just yet - not to mention that I haven’t asked David’s permission to share them - they started out as unwilling victims of my learning how to use Hexagon.

I started by simply removing the ship registry information - I make those with Photoshop Elements - and then I started taking the Objs apart.

When I get back from the holidays, I’ll ask David if I can share them.

Here is the Von der Tann - a Renown class armored cruiser and a Poser Compatible version of his Larson class destroyer. 

The Von der Tann consists of a port & starboard engine part, a secondary hull part, a primary hull part, a neck part, and 5 twin phaser turrets (Anton, Bruno, Cesare, Dora (rear saucer) and Emil (below the shuttle bay) parts.

(Edited to show the correct version of the Von der Tann.

The Larson class is one of my favorite designs because I had some great times as Captain of the USS Audie Murphy in a FASA ST:TRPG game way back in the 80’s.  Is the poserized model available somewhere?

Starwulf - 19 December 2012 01:05 AM

The Larson class is one of my favorite designs because I had some great times as Captain of the USS Audie Murphy in a FASA ST:TRPG game way back in the 80’s.  Is the poserized model available somewhere?

If you have Starkiller’s famous kit, you can use the addons that I and Bluto created to make the Larson class. They can be found at Xcal:

http://xcalpro.com/tng/download.php?view.123

The Enterprise-E update is now updated to Trekmeshes.  Its the same as the one on F3D that was updated back on the 13th.

Also, Erik over at Trekmeshes has confirmed that the next conversion will be available before Christmas…

oh cant wait for that , will the shuttlebay work also ?

MotoTsume - 19 December 2012 06:04 PM

oh cant wait for that , will the shuttlebay work also ?

Doors open and close.  No elevator.  I removed the mini Galileo that was included cause I am working on the full scale version.

mdbruffy - 19 December 2012 04:05 AM

Starwulf - 19 December 2012 01:05 AM

The Larson class is one of my favorite designs because I had some great times as Captain of the USS Audie Murphy in a FASA ST:TRPG game way back in the 80’s.  Is the poserized model available somewhere?

If you have Starkiller’s famous kit, you can use the addons that I and Bluto created to make the Larson class. They can be found at Xcal:

http://xcalpro.com/tng/download.php?view.123

I do indeed have Starkiller’s kit.  Thanks for the link.  Now I just need to add some RAM to my new machine and I can attempt some renders :D

Mattymanx - 19 December 2012 06:13 PM

MotoTsume - 19 December 2012 06:04 PM

oh cant wait for that , will the shuttlebay work also ?

Doors open and close.  No elevator.  I removed the mini Galileo that was included cause I am working on the full scale version.

Matt, that would be so cool if you could do one full scale.

Your friend
Oracle

Enterprise E added to the freebie list under the link http://www.trekmeshes.ch