General Freebie Requests

191012141550

Comments

  • Staffa24Staffa24 Posts: 0
    edited December 1969

    @chellethecat

    Would something like this suit you ?

    yoyo.jpg
    640 x 480 - 81K
  • Chelle the CatChelle the Cat Posts: 0
    edited December 1969

    Staffa24 said:
    @chellethecat

    Would something like this suit you ?

    Yes! That is exactly what I've been looking for!

  • SkirikiSkiriki Posts: 4,738
    edited December 1969

    carrie58 said:
    Skiriki I just put up 20 odd pose for the Milcat on ShareCG , lemme know what you think. Here's the link .....
    http://www.sharecg.com/v/64424/view/11/Poser/Odd-Poses-for-MilCat

    I just went over the poses and they kicked my butt! :lol: So cool and funny!

  • Staffa24Staffa24 Posts: 0
    edited December 1969

    Staffa24 said:
    @chellethecat

    Would something like this suit you ?

    Yes! That is exactly what I've been looking for!

    I just modeled the yo-yo after the example you posted :-)

    Go and get it, it's at ShareCG : http://www.ShareCG.com/v/64477/view/5/3D-Model/Yo-Yo

  • carrie58carrie58 Posts: 913
    edited December 1969

    Skiriki said:
    carrie58 said:
    Skiriki I just put up 20 odd pose for the Milcat on ShareCG , lemme know what you think. Here's the link .....
    http://www.sharecg.com/v/64424/view/11/Poser/Odd-Poses-for-MilCat

    I just went over the poses and they kicked my butt! :lol: So cool and funny!


    I am so glad ,and actually I'm working on a few more .........

  • pastelspastels Posts: 524
    edited December 1969

    With it's current popularity I'm kind of surprised I haven't seen an Iron Throne as seen in "Game of Thrones" either for sale or as a freebie. Maybe I've just missed it but if not perhaps one of the many model makers here might try a stab at it. I for one would certainly be willing to purchase it. Just a thought.

  • SkirikiSkiriki Posts: 4,738
    edited December 1969

    Quick! I need a free or low-cost coconut bra! (Must allow commercial renders.)

  • Tramp GraphicsTramp Graphics Posts: 1,727
    edited December 1969

    Skiriki said:
    Quick! I need a free or low-cost coconut bra! (Must allow commercial renders.)
    Will this work? http://www.sharecg.com/v/18502/view/11/Poser/Hula-Skirt-for-MFD (needs the MFD)

  • SkirikiSkiriki Posts: 4,738
    edited December 1969

    Ah! Sadly, no -- they need to be... er, more coconutty. 'Cause the figure I'm gonna stick 'em on has... no figure to speak of, so to speak.

  • DollyGirlDollyGirl Posts: 1,695
    edited December 1969

    Skiriki said:
    Ah! Sadly, no -- they need to be... er, more coconutty. 'Cause the figure I'm gonna stick 'em on has... no figure to speak of, so to speak.

    Well you could use these:
    http://www.sharecg.com/v/35295/View/5/3D-Model/Coconut-half

    or these:
    http://www.sharecg.com/v/33583/related/5/3D-Model/Coconuts

    and put something that fits your figure that has straps over the shoulder and something that bands the chest. You may have to setup a tranparency file to get the straps and the band.

  • SkirikiSkiriki Posts: 4,738
    edited December 1969

    Dollygirl said:
    Skiriki said:
    Ah! Sadly, no -- they need to be... er, more coconutty. 'Cause the figure I'm gonna stick 'em on has... no figure to speak of, so to speak.

    Well you could use these:
    http://www.sharecg.com/v/35295/View/5/3D-Model/Coconut-half

    or these:
    http://www.sharecg.com/v/33583/related/5/3D-Model/Coconuts

    and put something that fits your figure that has straps over the shoulder and something that bands the chest. You may have to setup a tranparency file to get the straps and the band.

    Yup, this is my emergency plan. Dangit, missing something so obvious and elemental as coconut bra. :(

  • DollyGirlDollyGirl Posts: 1,695
    edited December 1969

    Skiriki said:
    Dollygirl said:
    Skiriki said:
    Ah! Sadly, no -- they need to be... er, more coconutty. 'Cause the figure I'm gonna stick 'em on has... no figure to speak of, so to speak.

    Well you could use these:
    http://www.sharecg.com/v/35295/View/5/3D-Model/Coconut-half

    or these:
    http://www.sharecg.com/v/33583/related/5/3D-Model/Coconuts

    and put something that fits your figure that has straps over the shoulder and something that bands the chest. You may have to setup a tranparency file to get the straps and the band.

    Yup, this is my emergency plan. Dangit, missing something so obvious and elemental as coconut bra. :(

    This is for the Poser4 female:

    http://www.renderosity.com/mod/freestuff/details.php?item_id=557

  • SkirikiSkiriki Posts: 4,738
    edited December 1969

    Dollygirl said:

    Heading to download, sure that I can hammer it some to make it fit :)

  • FixmypcmikeFixmypcmike Posts: 11,651
    edited December 1969

    Skiriki said:
    Dollygirl said:

    Heading to download, sure that I can hammer it some to make it fit :)

    Ouch! It's tough being a model.

  • SkirikiSkiriki Posts: 4,738
    edited December 1969

    Ouch! It's tough being a model.

    Especially when working for me!

  • Chelle the CatChelle the Cat Posts: 0
    edited December 1969

    Staffa24 said:
    Staffa24 said:
    @chellethecat

    Would something like this suit you ?

    Yes! That is exactly what I've been looking for!

    I just modeled the yo-yo after the example you posted :-)

    Go and get it, it's at ShareCG : http://www.ShareCG.com/v/64477/view/5/3D-Model/Yo-Yo

    Thank you SO much, that is too kind of you to have done! :D

  • Staffa24Staffa24 Posts: 0
    edited December 1969


    Thank you SO much, that is too kind of you to have done! :D

    You're very welcome !
    I was a nice little speed-modeling challenge that I couldn't resist ;-)

  • beachlegsbeachlegs Posts: 87
    edited December 1969

    This is a big one if anyone can help please, I am looking for a Hercules Plane or any sort of plane that would have dropped paratrooper's into action
    no idea where to look for plane's as I have never needed one before now. Thank's for any help :) p.s British Plane needed.

  • ChoholeChohole Posts: 19,402
    edited December 1969

    This is a big one if anyone can help please, I am looking for a Hercules Plane or any sort of plane that would have dropped paratrooper's into action
    no idea where to look for plane's as I have never needed one before now. Thank's for any help :) p.s British Plane needed.


    Have you checked through this list, drawn up my our own RobKelk http://www.daz3d.com/forums/discussion/624/

  • beachlegsbeachlegs Posts: 87
    edited December 1969

    chohole said:
    This is a big one if anyone can help please, I am looking for a Hercules Plane or any sort of plane that would have dropped paratrooper's into action
    no idea where to look for plane's as I have never needed one before now. Thank's for any help :) p.s British Plane needed.


    Have you checked through this list, drawn up my our own RobKelk http://www.daz3d.com/forums/discussion/624/

    No I havent thank you so much chohole you are alway's so helpful and I really appreciate it :)

  • ChoholeChohole Posts: 19,402
    edited September 2012

    There are actually a whole lot of lists of various different things, so we made a list of the lists, so they are easy to find.

    http://www.daz3d.com/forums/discussion/75/

    It is stickied at the top of the forum , just under this thread, so it is always easy to access.

    Post edited by Chohole on
  • beachlegsbeachlegs Posts: 87
    edited December 1969

    chohole said:
    There are actually a whole lot of lists of various different things, so we made a list of the lists, so they are easy to find.

    http://www.daz3d.com/forums/discussion/75/

    It is stickied at the top of the forum , just under this thread, so it is always easy to access.

    My mum use to say I look as far as my nose end's and now I can see the link's I will alway's check there first...Thank's again chohole :)

  • r111rdodyr111rdody Posts: 3
    edited December 1969

    i'm frustating of searching hair for stephanie 5 hair, clothing & props.
    there's a lot for victoria, etc, but no stephanie 5

    regarads,
    r111rdody

  • SkirikiSkiriki Posts: 4,738
    edited December 1969

    r111rdody said:
    i'm frustating of searching hair for stephanie 5 hair, clothing & props.
    there's a lot for victoria, etc, but no stephanie 5

    Anything that fits Genesis/Victoria 5/Michael 5 will fit Stephanie 5. Some tweaking may be needed (such as adjusting smoothing/collision values), but grab some Wilmap's Genesis freebie clothes and give it a try. You'll see.

  • r111rdodyr111rdody Posts: 3
    edited December 1969

    Skiriki said:
    r111rdody said:
    i'm frustating of searching hair for stephanie 5 hair, clothing & props.
    there's a lot for victoria, etc, but no stephanie 5

    Anything that fits Genesis/Victoria 5/Michael 5 will fit Stephanie 5. Some tweaking may be needed (such as adjusting smoothing/collision values), but grab some Wilmap's Genesis freebie clothes and give it a try. You'll see.

    thank you Skiriki..

    it's my first time using daz studio. i like this software a lot. but getting confused of character, because there a lot of different character.

    but i'm looking forward to studying it.

    i'm sorry if my english not good..

    regards,
    r111rdody

  • SkirikiSkiriki Posts: 4,738
    edited December 1969

    r111rdody said:
    it's my first time using daz studio. i like this software a lot. but getting confused of character, because there a lot of different character.

    No problem! I was there in February this year when I started. Genesis anything + 5 = compatible with each other, UNLESS the shapes are REALLY extreme (and even then may work with some adjustments). This is a quick-and-dirty rule of thumb; the more in-depth explanation is complicated.

    The old system where each figure was its own unique shape (such as Michael 1 to 4, and Victoria 1 to 4), or a modification to existing base shape (like David was to Michael and Stephanie was to Victoria), is... well, it is oldtech for DAZ Studio. Sure, people still use it and swear by it, and if they enjoy it, more power to them. I just like the extreme versatility of Genesis (check my DeviantArt page for examples; all humanoid figures, including werewolves, are based on Genesis) and ability to share parts and clothes reasonably hassle-free.

    I recommend to get the V4 and M4 shapes for Genesis (from DAZ Store), if you don't have them already, along with Generation 3 and 4 and Evolution bundles. This will give you LOTS of tools to use. No need to buy 'em all at once, but V4/M4 shapes will make your life more pleasant.

    but i'm looking forward to studying it.

    i'm sorry if my english not good..

    No problem, I understood you just fine. :) Wilmap's freebies are good for practising (since they come with zero pricetag) in getting your figures dressed up.

    You will find more help from the new users section, and of course from Nuts'n'Bolts and The Commons. :) Happy rendering times!

  • r111rdodyr111rdody Posts: 3
    edited December 1969

    Skiriki said:
    r111rdody said:
    it's my first time using daz studio. i like this software a lot. but getting confused of character, because there a lot of different character.

    No problem! I was there in February this year when I started. Genesis anything + 5 = compatible with each other, UNLESS the shapes are REALLY extreme (and even then may work with some adjustments). This is a quick-and-dirty rule of thumb; the more in-depth explanation is complicated.

    The old system where each figure was its own unique shape (such as Michael 1 to 4, and Victoria 1 to 4), or a modification to existing base shape (like David was to Michael and Stephanie was to Victoria), is... well, it is oldtech for DAZ Studio. Sure, people still use it and swear by it, and if they enjoy it, more power to them. I just like the extreme versatility of Genesis (check my DeviantArt page for examples; all humanoid figures, including werewolves, are based on Genesis) and ability to share parts and clothes reasonably hassle-free.

    I recommend to get the V4 and M4 shapes for Genesis (from DAZ Store), if you don't have them already, along with Generation 3 and 4 and Evolution bundles. This will give you LOTS of tools to use. No need to buy 'em all at once, but V4/M4 shapes will make your life more pleasant.

    but i'm looking forward to studying it.

    i'm sorry if my english not good..

    No problem, I understood you just fine. :) Wilmap's freebies are good for practising (since they come with zero pricetag) in getting your figures dressed up.

    You will find more help from the new users section, and of course from Nuts'n'Bolts and The Commons. :) Happy rendering times!

    thank's a lot Skiriki.. :)

    regards,
    r111rdody

  • beachlegsbeachlegs Posts: 87
    edited December 1969

    I am looking for Camper van or VW Beetle need it to be flower power as I am making a hippy image any idea's where I could get one ?...checked all thread's for freebie auto's. I dont mind paying if there is one out there..Thank you.

  • Eustace ScrubbEustace Scrubb Posts: 1,374
    edited December 1969

    Unfortunately the Bug I got many months ago is no longer available... :(

  • DollyGirlDollyGirl Posts: 1,695
    edited December 1969

    I am looking for Camper van or VW Beetle need it to be flower power as I am making a hippy image any idea's where I could get one ?...checked all thread's for freebie auto's. I dont mind paying if there is one out there..Thank you.

    Try looking through this thread for something that might work for you. I saw a Micro bus listed:

    http://www.daz3d.com/forums/discussion/623/

This discussion has been closed.
Rocket Fuel